Joy-it JT-LCR-T7 Handleiding

Joy-it Multimeter JT-LCR-T7

Bekijk gratis de handleiding van Joy-it JT-LCR-T7 (6 pagina’s), behorend tot de categorie Multimeter. Deze gids werd als nuttig beoordeeld door 166 mensen en kreeg gemiddeld 4.4 sterren uit 83.5 reviews. Heb je een vraag over Joy-it JT-LCR-T7 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/6
www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
MULTI FUNCTIONAL TESTER-
Multi functional measurement device-
1. GENERAL INFORMATION
Dear customer,
thank you for choosing our product. In the following, we will show you how
to use this device.
Should you encounter any unexpected problems during use, please do not
hesitate to contact us.
www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
2. STRUCTURE
Display
Infrared decoder Button
Charging status LED microUSB port
Slots for measuring the
breakdown voltage
Slots for
measuring
www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
3. INITIAL OPERATION
When you start the measuring device for the first time, you should first
perform a self-test of the device. For this purpose, you must short circuit -
the slots 1, 2 and 3. You do this as follows:
Now press Start to perform the self test. You will be asked by the device -
at approx. 22% to remove the component to close the course so that the
self test can be completed successfully. Now you can start measuring -
your components. You start the measuring process with the Start button.
A 3.7 V battery with 350 mAh is built into the multifunction tester. You can
charge it with microUSB and a 5 V power supply. The LED shows the
status of the battery. That means it shines red when the battery is
charging and green when the battery is fully charged.
The battery of this measuring device is also measured during each
component measurement. Therefore, the residual voltage of the battery
is also displayed during each measurement. This residual voltage is
displayed with .Vbat = V
The device will also tell you when the battery needs to be charged again.
This device switches o automatically aer 20 seconds of inactivity. You
can also turn it o manually by pressing and holding the Start button.


Product specificaties

Merk: Joy-it
Categorie: Multimeter
Model: JT-LCR-T7

Ik krijg steeds de handleiding in het engels ondanks ik ze in het nedrlands heb aangevraagd voor lcr t7 ???

  Johan van Dijk - 23 December 2024

Heb je hulp nodig?

Als je hulp nodig hebt met Joy-it JT-LCR-T7 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden