Jøtul GF 200 DV IPI Handleiding
Jøtul
Niet gecategoriseerd
GF 200 DV IPI
Bekijk gratis de handleiding van Jøtul GF 200 DV IPI (36 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 5 mensen en kreeg gemiddeld 4.7 sterren uit 3 reviews. Heb je een vraag over Jøtul GF 200 DV IPI of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/36
1
139587_10 GF 200 DV IPI April 2018
Jøtul GF 200 DV IPI
Direct Vent Gas Stove
Installation and
Operation Instructions
– Do not store or use gasoline or other
ammable vapors and liquids in the
vicinity of this or any other appliance.
– WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switch; do
not use any phone in your building.
• Immediately call your gas supplier
from a neighbor’s phone. Follow the gas
supplier’s instructions.
• If you cannot reach your gas supplier, call
the re department.
– Installation and service must be performed
by a qualied installer, service agency or
the gas supplier.
– In the Commonwealth of Massachusetts,
a carbon monoxide (CO) detector shall
be installed in the same room as the
appliance.
WARNING: If the information in these
instructions is not followed exactly, a re or
explosion may result causing property damage,
personal injury or loss of life.
This appliance may be installed in an aftermarket,
permanently located, manufactured home or
mobile home, where not prohibited by local codes.
This appliance is only for use with the types of gas
indicated on the rating plate. A conversion kit is
supplied with the appliance.
INSTALLER: Leave this manual with the appliance.
CONSUMER: Retain this manual for future reference.
2
139587_10 GF 200 DV IPI April 2018
THIS OWNER’S MANUAL PROVIDES INFORMATION TO
ENSURE SAFE INSTALLATION AND EFFICIENT, DEPENDABLE
OPERATION OF YOUR FIREPLACE INSERT. PLEASE READ
THESE INSTRUCTIONS IN THEIR ENTIRETY AND MAKE THEM
AVAILABLE TO ANYONE USING OR SERVICING THIS GAS
INSERT.
DO NOT ATTEMPT TO ALTER OR MODIFY THE CONSTRUCTION
OF THIS APPLIANCE OR ITS COMPONENTS. ANY
MODIFICATION OR ALTERATION WILL VOID THE WARRANTY,
CERTIFICATION AND LISTING OF THIS APPLIANCE.
THIS HEATER MUST BE INSTALLED AND MAINTAINED BY A
QUALIFIED SERVICE AGENCY.
Suggested Tools for
Installation and Service
• External regulator (for Propane only)
• Piping which complies with local code
• Manual shut-o valve -
T-Handle required in Massachusetts
• Sediment trap - if required by code
• Tee joint
• Pipe wrench
• Pipe sealant
• 10 mm open end wrench
• 1/2”, 7/16” open end wrench
• Phillips head screwdriver
• Flat head screwdriver
• 1/4” nut driver
• Gloves
• Safety glasses
• Torx T-20 screwdriver
• Tin snips
Installation Requirements for the
Commonwealth of Massachusetts
THIS PRODUCT MUST BE INSTALLED BY A LICENSED MASTER
OR JOURNEYMAN PLUMBER OR GASFITTER WHEN INSTALLED
IN THE COMMONWEALTH OF MASSACHUSETTS.
1. If there is not one already present, on each oor level
where there are bedroom(s), a carbon monoxide detector
and alarm shall be placed in the living area outside the
bedroom(s). The carbon monoxide detector shall comply
with NFPA 720 (2005 Edition).
2. A carbon monoxide detector shall:
a) Be located in the room that houses the appliance or
equipment;
b) Be either hard-wired or battery powered or both; and
c) Shall comply with NFPA 720 (2005 Edition).
3. A Product-approved vent terminal must be used, and
if applicable, a Product-approved air intake must be
used. Installation shall be in strict compliance with the
manufacturer’s instructions. A copy of the installation
instructions must remain with the appliance or equipment
at the completion of the installation.
INITIAL FIRING PROCESS -
Heat-curing the Paint and Log Set
This appliance has been painted with the
highest quality coating used in the hearth
industry. Manufacturers have selected this
product because it has been proven durable,
colorfast, and beautiful at temperatures up to
1200°F/650°C. Although the paint has been
air-dried at the factory, it must be heat-cured
in order to maximize its coating properties and
durability. This process occurs during initial
ring of the appliance and will generate odor
and some visible smoke.
We recommend you do the following BEFORE
operating the appliance for the rst time:
1. Ventilate: Open doors and windows and use
a fan to circulate fresh air throughout the
room.
2. Vacate: The fumes are non-toxic, but can
be uncomfortable for babies, small children,
pregnant women, elderly, pets, or anyone
having breathing diculties.
Gas Appliance Curing Process
1. After the installer has conrmed proper
burner function at all heat levels, the
homeowner should operate the appliance at
a low setting for 2-4 hours, followed by 2-4
hours operation at a high setting.
2. O-gassing by paint and log set ceramic
material may leave a white, powdery deposit
on the inside surface of the glass panel.
This residue must be removed using a non-
abrasive household glass cleaner or warm
water to prevent permanent etching of the
glass.
DO NOT USE AMMONIA-BASED CLEANERS.
See Section 8, OPERATION for detailed, day-to-
day operating procedures.
Natural Gas / 67.21%
Propane / 71.05%
Jøtul GF 200 DV IPI
Based on CSA P.4.1-15
Product specificaties
| Merk: | Jøtul |
| Categorie: | Niet gecategoriseerd |
| Model: | GF 200 DV IPI |
Heb je hulp nodig?
Als je hulp nodig hebt met Jøtul GF 200 DV IPI stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Jøtul
21 Augustus 2025
21 Augustus 2025
21 Augustus 2025
21 Augustus 2025
21 Augustus 2025
20 Augustus 2025
20 Augustus 2025
20 Augustus 2025
20 Augustus 2025
20 Augustus 2025
Handleiding Niet gecategoriseerd
- Lumens
- Iluv
- Trace Elliot
- Crystal Quest
- Samsung
- Avenview
- SHX
- Bea-fon
- R-Go Tools
- Triumph Sports
- Mafell
- Thermarest
- TruVoice
- Aputure
- Doughty
Nieuwste handleidingen voor Niet gecategoriseerd
20 Augustus 2025
20 Augustus 2025
20 Augustus 2025
20 Augustus 2025
20 Augustus 2025
19 Augustus 2025
19 Augustus 2025
19 Augustus 2025
19 Augustus 2025
19 Augustus 2025