JML Arctic Air 17013-G Handleiding

JML Air cleaner Arctic Air 17013-G

Bekijk gratis de handleiding van JML Arctic Air 17013-G (22 pagina’s), behorend tot de categorie Air cleaner. Deze gids werd als nuttig beoordeeld door 20 mensen en kreeg gemiddeld 4.3 sterren uit 10.5 reviews. Heb je een vraag over JML Arctic Air 17013-G of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/22
INSTRUCTION MANUAL
Arctic_Air_IM.indd 1 24-01-18 15:15
WHATS INCLUDED:
READ ENTIRE MANUAL BEFORE USE
SAVE THESE INSTRUCTIONS
On/o
button
Fan speed
indicator
Front grill
Fan speed
button
Light
button
Water
tank
Back grill
TIPS:
Place Arctic Air™ on a raised surface such as a table, desk or counter top.
is is the best way to cool your personal area faster.
Let lter absorb water for at least 3 minutes aer lling tank and before
use. Doing so will get you the coolest air quicker.
Try to stay within a few feet of Arctic Air™. You’ll feel the most benet
when sitting directly in front.
Arctic Air™ will run for approximately 8 hours on a single ll on Low fan
speed. Even if water tank is empty, lter is still damp and Arctic Air™ is still
cooling.
1. Place Arctic Air™ on a at surface. (see g 1)
2. Open the water tank door and ll with water (see g 2). We recommend
a pitcher or measuring cup.
3. Plug USB power adapter (SW-050150EU) into an outlet. en, insert larger
USB end of cable into the adapter and the smaller end into the power port
on the back of Arctic Air™. (see g 3) NOTE: You can plug the larger USB
end into a computer to power Arctic Air™ as well. e Power should be
SELV: (DC 5 V, 1.5 or 2.0A).
SETUP:
12 3
Arctic_Air_IM.indd 2-3 24-01-18 15:15
USAGE:
1. Press power button to power on Arctic Air™.
(see g 4)
2. Set the fan speed by pressing button. You can
choose from Low, Medium, and High Mode. e
indicator lights next to the button show you which
speed Arctic Air™ is currently running. (see g 5)
3. Choose your light color by pressing button.
You can choose between solid colors or a
color-cycle mode. (see g 6) COLOR ORDER: blue,
red, white, teal, purple, yellow, green.
4. When youre done, press the power button again to
turn o your Arctic Air™. NOTE: We recommend
running Arctic Air™ on HIGH mode for at least 5
minutes before powering o to allow for drying.
LOW WATER: When water level is low, water tank will
blink 3 times every 60 seconds in AMBER color. When
tank is lled again light will function as normal again.
We recommend cleaning the water tank and inside of the unit once weekly.
Use only a non-abrasive cloth and mild dish soap when needed.
For best continued results, we recommend changing the lter every 6 months.
Unplug the unit before cleaning.
MAINTENANCE:
e water lter should be changed every 6 months, or
when you feel Arctic Air™ is not functioning as it should
be. e water tank will light up AMBER until lter is
reset. To reset the lter, hold the fan speed button and
the light button for 3 seconds until the water tank is not
AMBER anymore.
1. Unplug Arctic Air™ from the wall.
2. Gently press in release tab on bottom of front grill
and pull grill down and away from unit. Place aside.
(see g 7)
3. Grab onto lter and carefully slide out of unit
completely. (see g 8)
4. Place new lter in Arctic Air™ as shown by mar
kings on lter. (see g 9)
5. Insert top tab of front grill into slot, and press
release tab back into place. (see g 10)
Warning: When you remove the Front Grill the Unit
Fan & Power will turn off & the Water Tank LED will
Blink Red unit the Grill is Put back in place. Its a
safety function.
CHANGING THE FILTER:
4
5
6
7
8
9
10
Arctic_Air_IM.indd 4-5 24-01-18 15:15


Product specificaties

Merk: JML
Categorie: Air cleaner
Model: Arctic Air 17013-G

Heb je hulp nodig?

Als je hulp nodig hebt met JML Arctic Air 17013-G stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Air cleaner JML

Handleiding Air cleaner

Nieuwste handleidingen voor Air cleaner