JLab Go Sport+ Handleiding
JLab
Hoofdtelefoon
Go Sport+
Bekijk gratis de handleiding van JLab Go Sport+ (3 pagina’s), behorend tot de categorie Hoofdtelefoon. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.9 sterren uit 2 reviews. Heb je een vraag over JLab Go Sport+ of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/3
We love that you are rocking JLab!
We take pride in our products and fully stand behind them.
GO SPORT+
EARBUDS
YOUR WARRANTY
All warranty claims are subject to JLab authorization
and at our sole discretion. Retain your proof of
purchase to ensure warranty coverage.
CONTACT US
Reach out to us at support@jlab.com
or visit jlab.com/contact
Take earbuds out of case and remove stickers.
Place back in case and close door.
ADDING NEW ADDITIONAL BLUETOOTH DEVICES: /
Turn OFF Bluetooth from any previously connected
device. Turn ON Bluetooth from new device.
Take earbuds out of the case.
Earbuds will automatically enter Bluetooth Pairing.
Select “JLab GO Sport+” in device settings to connect.
BLUETOOTH PAIRING
1
One earbud blink blue/white will indicating
ready to pair to your device.
3
Red light on case indicates charge.
Remove earbuds from case.
2
Select “JLab GO Sport+” in your device's
Bluetooth settings to connect.
Voice prompt “Bluetooth connected” followed by
blinking white lights will indicate you are connected.
4
Bluetooth
Settings
JLab GO Sport+
REGISTER TODAY
jlab.com/register
Product updates How-to tips|
FAQs & more
L
I
M
I
T
E
D
T
W
O
Y
E
A
R
W
A
R
R
A
N
T
Y
S
U
P
P
O
R
T
T
E
A
M
#
T
E
A
M
J
L
A
B
Earbuds will power off when placed in the case
and start charging.
Earbuds will auto power on and connect to
your device when removed.
LEFT RIGHT
BUTTON FUNCTIONS
Tap either the right or left earbud 3 times for different EQ settings (GO Sport+ will cycle 4 EQ settings).
CUSTOM EQ
3
SOUND MODES
JLab SIGNATURE
JLab C3™ signature
sound with amplified
bass and vocals
BALANCED
Even sound with
no additional
enhancements
BASS BOOST
Amplified bass
and sub-bass
CH NARGI G EARBUDS
1 2
Blinks 4x Red
Case less than 25%
(charge case)
Solid Red
Case 100-25%
CUSTOM
Personalize your
EQ through
the JLab App.
VOLUME DOWN
SIRI/OK GOOGLE
TRACK BACK
EQ CHANGE
VOLUME UP
PLAY/PAUSE
TRACK FORWARD
BE AWARE
ANSWER CALL
HANG UP
REJECT INCOMING CALLS
1x 2x
3x
Press Hold
FITTING
Connect the GO Sport+ into a computer or USB-C 5V 1A (or less) output device.
CH NARGI G CASE
OR
Place hook behind ear.
Rotate and adjust for best fit.
Try all ear tips for best
fit and proper seal.
CAUTIONS
• Avoid extreme heat, cold, and humidity.
• Avoid dropping or crushing the earbuds.
• Wax may build up in the earbud tips, lowering the sound quality.
Carefully remove the wax with a cotton swab or other small tool to improve the sound quality.
• If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
• If you experience regular discomfort while using this product, discontinue use and consult your physician.
• We recommend you treat your earbuds as you would a nice pair of sunglasses and keep them in safe location when not in use.
• The left or right earbud can be used independently for music and
phone calls. Simply choose one and take out of the case to connect.
• Only ONE Bluetooth device can be connected at a time. Turn off
Bluetooth on unwanted devices and turn on Bluetooth on chosen
device to connect.
Fully dry off the earbuds before
putting in the charging case to
avoid any damage to the case.
The earbuds are sweat/water
resistant but the case is not.
QUICK TIPS
WARNING
Shop products Product alerts Burn-in your headphones| |
JLab Store + Burn-in Tool
JLAB.COM
Instructional videos at: JLAB.COM/SUPPORT/GOSPORTPLUS
TROUBLESHOOTING
Connection failure or earbuds disconnected from each other (Manual Reset)
1 Keep the earbuds in the charging case and forget “JLab GO Sport+” from your Bluetooth device settings.
2 Quick tap 7x on one earbud in charging case. Earbud blinks blue 4 times.
3 Quick tap 7x on other earbud in charging case. Earbud blinks blue 4 times.
4 Take both earbuds out of the charging case.
One earbud will be solid white and other will blink blue/white indicating ready to pair to your device.
Charging
Blinks Blue
Fully Charged
Solid Blue
Product specificaties
| Merk: | JLab |
| Categorie: | Hoofdtelefoon |
| Model: | Go Sport+ |
Heb je hulp nodig?
Als je hulp nodig hebt met JLab Go Sport+ stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Hoofdtelefoon JLab
12 April 2025
12 April 2025
16 December 2024
25 Juli 2023
18 Mei 2023
13 Mei 2023
21 April 2023
19 April 2023
9 April 2023
7 April 2023
Handleiding Hoofdtelefoon
- Magnum
- Adesso
- Marquant
- Dual
- Phonocar
- Fairphone
- Sennheiser
- Ebode
- V-Tac
- Focal
- Ednet
- Fysic
- QFX
- Axagon
- Stereoboomm
Nieuwste handleidingen voor Hoofdtelefoon
18 Juni 2025
18 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025