JLab GO Air TONES Handleiding

JLab Oordopje GO Air TONES

Lees hieronder de 📖 handleiding in het Nederlandse voor JLab GO Air TONES (3 pagina's) in de categorie Oordopje. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3

We love that you are rocking JLab!

We take pride in our products and fully stand behind them.

GO AIR TONES

EARBUDS

YOUR WARRANTY

All warranty claims are subject to JLab authorization

and at our sole discretion. Retain your proof of

purchase to ensure warranty coverage.

Reach out to us at support@jlab.com

or visit jlab.com/contact

Remove tab and close door.

ADDING NEW ADDITIONAL BLUETOOTH DEVICES: /

Turn OFF Bluetooth from any previously connected

device. Turn ON Bluetooth from new device.

Take earbuds out of the case.

Earbuds will automatically enter Bluetooth Pairing.

Select “JLab GO Air Tones” in device settings to connect.

BLUETOOTH PAIRING

One earbud blink blue/white will indicating

ready to pair to your device.

Red light on case indicates charge.

Remove earbuds from case.

Select “JLab GO Air Tones” in your device's

Bluetooth settings to connect.

Voice prompt “Bluetooth connected” followed by

blinking white lights will indicate you are connected.

Bluetooth

Settings

JLab GO Air Tones

jlab.com/register

Product updates How-to tips|

FAQs & more

Earbuds will power off when placed in the case

and start charging the earbuds.

Earbuds will auto power on and connect to

your device when removed.

LEFT RIGHT

VOLUME DOWN: Single tap

SIRI (iOS) or “OK GOOGLE”

(ANDROID): Double tap

TRACK BACK: Press & hold 1+ sec

VOLUME UP: Single tap

PLAY PAUSE: / Double tap

TRACK FORWARD: Press & hold 1+ sec

VOICE PROMPTS

“Hello”: Power ON

“Ready to Pair”: GO Air Tones is

ready to pair to Bluetooth device

“Bluetooth Connected”:

Earbud is connected to device

“Battery Full”: 100-75%

“Battery Medium”: 75-25%

“Low Battery”: Less than 25%

(When power decreases to 10%,

“Low Battery” will play one time)

“Goodbye”: Power OFF

BUTTON FUNCTIONS

Tap either the right or left earbud 3 times for different EQ settings (GO Air Tones will cycle 3 EQ settings).

CUSTOM EQ3 SOUND MODES

JLab SIGNATURE

JLab C3™ signature

sound with amplified

bass and vocals

BALANCED

Even sound with

no additional

enhancements

BASS BOOST

Amplified bass

and sub-bass

CH NARGI G EARBUDS

1 2

ANSWER CALL: Single tap

HANGUP: Double tap

REJECT INCOMING CALLS: Press & hold 1+ sec

EQ CHANGE: Triple tap

Blinks 4x Red

Case less than 25%

(charge case)

Solid Red

Case 100-25%

FITTING

Connect the GO Air Tones into a computer or USB 5V 1A (or less) output device.

CH NARGI G CASE

Place the earbud in the

ear canal and slightly

rotate to adjust for best fit.

Try all ear tips for best

fit and proper seal.

CAUTIONS

• Avoid extreme heat, cold, and humidity.

• Avoid dropping or crushing the earbuds.

• Wax may build up in the earbud tips, lowering the sound quality.

Carefully remove the wax with a cotton swab or other small tool to improve the sound quality.

• If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.

• If you experience regular discomfort while using this product, discontinue use and consult your physician.

• We recommend you treat your earbuds as you would a nice pair of sunglasses and keep them in safe location when not in use.

• The left or right earbud can be used independently for music and phone

calls. Simply choose one and take out of the case to connect.

• Only ONE Bluetooth device can be connected at a time. Turn off

Bluetooth on unwanted devices and turn on Bluetooth on chosen device

to connect.

Fully dry off the earbuds before

putting in the charging case to

avoid any damage to the case.

The earbuds are sweat/water

resistant but the case is not.

QUICK TIPS

WARNING

Shop products Product alerts Burn-in your headphones| |

JLab Store + Burn-in Tool

JLAB.COM

Instructional videos at: JLAB.COM/MANUALS

TROUBLESHOOTING

Connection failure or earbuds disconnected from each other (Manual Reset)

1 Keep the earbuds in the charging case and forget “JLab GO Air Tones” from your Bluetooth device settings.

2 Quick tap 7x on one earbud in charging case. Earbud blinks blue 4 times.

3 Quick tap 7x on other earbud in charging case. Earbud blinks blue 4 times.

4 Take both earbuds out of the charging case.

One earbud will be solid white and other will blink blue/white indicating ready to pair to your device.

Charging

Blinks Blue

Fully Charged

Solid Blue

Product specificaties

Merk:	JLab
Categorie:	Oordopje
Model:	GO Air TONES
Soort bediening:	Touch
Internationale veiligheidscode (IP):	IPX4
LED-indicatoren:	Bezig met opladen
Capaciteit van de accu/batterij:	43 mAh
Bluetooth:	Ja
Aan/uitschakelaar:	Ja
Bluetooth-versie:	5.1
Bluetooth-profielen:	A2DP,AAC,AVRCP,HFP,HSP,SBC
Connectiviteitstechnologie:	True Wireless Stereo (TWS)
Kleurnaam:	4625 W
Snel opladen:	Nee
Garantiekaart:	Ja
Volumeregeling:	Touch
Levensduur accu/batterij:	32 uur
Aantal:	1
Draagwijze:	In-ear
Aanbevolen gebruik:	Oproepen/muziek
Gewicht van linker oordopje:	3.7 g
Gewicht van rechter oordopje:	3.7 g
Impedantie:	16 Ohm
Positie speakers koptelefoon:	Intraauraal
Intra-aural type koptelefoon:	Oordopjes
Frequentiebereik koptelefoon:	20 - 20000 Hz
Aansluitbereik:	10 m
Microfoontype:	Ingebouwd
Accu gestuurd:	Ja
Accu/Batterij oplaadtijd:	2.2 uur
Gevoeligheid koptelefoon:	103 dB
Standby tijd:	60 uur
Oplaadstation:	Ja
Oplaadbron:	USB
Bedieningstoetsen:	Answer/end call,Play/pause,Reject call,Track <,Track >,Volume +,Volume -
Diameter van de luidspreker:	6 mm
Oplaadcassette:	27.5 g
Batterij-oplaadindicatie:	Ja
Accessoires inbegrepen in set:	3 sizes gel eartips
Type regeleenheid:	On-ear control unit
Gevoeligheid microfoon:	-42 dB
Capaciteit oplaadstation:	350 mAh
Connectortype oplaadstation/opbergdoos:	USB Type-A
Type oplaadstation/opbergdoos:	Bedraad
Batterij capaciteit (oplaaddoos):	350 mAh
Type product:	Hoofdtelefoons
Werkt met de Google Assistent:	Ja
Batterijtechnologie:	Lithium-Polymeer (LiPo)
Type batterij:	Ingebouwde accu
Basisstation USB-connector:	USB Type-A
Werkt met Apple Siri:	Ja
Touchscreen/aanraakscherm basisstation:	Nee
Garantieperiode:	2 jaar
Batterij technologie (oplaaddoos):	Lithium-Polymeer (LiPo)