JL Audio Stealthbox SB-GM-ESC/10W1v3/DG Handleiding

Bekijk gratis de handleiding van JL Audio Stealthbox SB-GM-ESC/10W1v3/DG (3 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 59 mensen en kreeg gemiddeld 4.5 sterren uit 7 reviews. Heb je een vraag over JL Audio Stealthbox SB-GM-ESC/10W1v3/DG of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Thank you for choosing a JL Audio Stealthbox® for your automotive sound system. With proper installation, your new vehicle-

specific enclosed subwoofer system will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox®installed by your authorized JL Audio dealer. The installation

professionals employed by your dealer have the necessary tools and experience to disassemble and reassemble your vehicle

properly. Also, keep in mind that your warranty coverage extends to 2 years if your system is installed or approved by your

authorized JL Audio dealer. If you prefer to perform your own installation, please read this installation guide completely

before beginning the process.

If you choose to perform the installation yourself, it is absolutely vital that

the Stealthbox® be properly mounted to the vehicle according to these

instructions. Failure to mount the enclosure properly presents two problems:

1) The sub-bass performance will suffer due to the movement of the enclosure

caused by the force exerted by the woofer(s).

2) A loose enclosure presents a serious safety hazard in the event of a collision

or sudden deceleration.

STEP 1

These instructions are for both the short and long

wheelbase versions of this popular SUV.

Empty out the back of the vehicle so that you have a clean

area to work in.

Remove the pocket in the rear quarter interior trim panel on

the drivers side of the vehicle by pulling it up and out. The

wire to power the Stealthbox® needs to come from this open

area, now would be a good time to run that wire. Leave

enough extra to make it easy to make the connection to the

Stealthbox® before it is permanently mounted.

Continued on Next Page

STEP 2

Looking down through the hole where the pocket had been,

notice the three studs installed at the factory. These studs

will be used to hold down the enclosure.

STEP 3

The Triangular Plate will be positioned as shown with center

the hole closest to the stud pointing towards the center of

the vehicle..

SB-GM-ESC(ESV)/10W1v3 INSTR_SKU# 011303

INSTALLATION

D I F F ICU LTY :

25

OUT

OF

ESTIMATED TIME:

2 HOURS

INSTALLATION GUIDE

for the

SB-GM-ESCESV/10W1v3

SB-GM-ESC/10W1v3

SKU#94476-94479 & 94483-94486

2007-2013 Cadillac Escalade, Chevrolet Tahoe/Suburban, & GMC Yukon

OR

Product specificaties