JL Audio Stealthbox SB-F-SUPRCC/13TW5v2/BK Handleiding

JL Audio Niet gecategoriseerd Stealthbox SB-F-SUPRCC/13TW5v2/BK

Lees hieronder de đź“– handleiding in het Nederlandse voor JL Audio Stealthbox SB-F-SUPRCC/13TW5v2/BK (7 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7
I N S T A L L A T I O N G U I D E
for the
SB-F-SUPRCC/13TW5v2
SKU# 94414-94417
2004-2016 Ford SuperDuty Crew Cab
Thank you for choosing a JL Audio Stealthbox® for your automotive sound system. With proper installation, your new vehicle-
specific enclosed subwoofer system will deliver years of listening pleasure.
We strongly recommend that you have your new Stealthbox® installed by your authorized JL Audio dealer. The installation
professionals employed by your dealer have the necessary tools and experience to disassemble and reassemble your vehicle
properly. Also, keep in mind that your warranty coverage extends to 2 years if your system is installed or approved by your
authorized JL Audio dealer. If you prefer to perform your own installation, please read this installation guide completely
before beginning the process.
If you choose to perform the installation yourself, it is absolutely vital that
the Stealthbox ® be properly mounted to the vehicle according to these
instructions. Failure to mount the enclosure properly presents two problems:
1) The sub-bass performance will suffer due to the movement of the enclosure
caused by the force exerted by the woofer(s).
2) A loose enclosure presents a serious safety hazard in the event of a collision
or sudden deceleration.
S T E P 1
Remove any contents in the backseat area and flip the seat
up.
Remove the 6 Torx® T40 bolts that hold in the floor tray as
indicated by the circles on the picture to the left. This tray
will not be used, remove it from the truck and, store it for re-
installation if the truck needs to return to OEM configuration.
set aside 4 of the T40 Torx® bolts, they will be used to install
the Stealthbox®.
Continued on Next Page
S T E P 2
There are four brackets that need to be installed on the
enclosure, two on each end. The short end of the bracket
attaches to the enclosure using the supplied hardware (see
DETAIL below). Do not tighten hardware down at this point,
just get it in place.
D E T A I L
SB-F-SUPRCC/13TW5v2 INSTR_SKU# 011275
INSTALLATION
D I F F I C U L T Y :
15
OUT
OF
ESTIMATED TIME:
1 HOUR
SB-F-SUPRCC/13TW5v2 INSTR_SKU# 011275
S T E P 6
Step back and admire your work, flip the rear seat back
down,
C O N G R A T U L A T I O N S !
You have completed the installation for this model!
Enjoy your new Stealthbox®!
Please refer to the Power Recommendation section for an
amplifier recommendation and basic set-up help.
S T E P 5
Tighten the T40 Torx® bolts that secure the mounting
brackets to the truck.
S T E P 4
4 of the T40 Torx® bolts that were removed in STEP 1 will be
used to secure the Stealthbox® to the truck. Get all 4 bolts
started before tightening any hardware. Tighten the 4 bolts
that secure the mounting brackets to the Stealthbox® first.
S T E P 3
Set the enclosure in place with the terminal cup towards
the center of the truck. Now is an excellent time to test
the Stealthbox® for proper operation. After performance
has been ensured, align the holes in the brackets with the
threaded inserts that originally mounted the Floor tray that
was removed in STEP 1.
Page 2 • JL Audio, Inc 2017
I N C L U D E D H A R D W A R E
4) 1/4”-20 x 1” Hex Head Bolt
4) 1/4” Flat Washer
4) 1/4” Split Lock Washer
4) Mounting Bracket
S P E C I F I C A T I O N S
Enclosure Type: Acoustic Suspension (sealed)
Driver Type: 13TW5v2-2
Nominal Impedance: 2 Ohms
Continuous Power Handling: 600 Watts
P O W E R R E C O M M E N D A T I O N
JL Audio recommends using a high quality amplifiers such as the JL Audio XD600/1v2. The diagram below shows
the recommended crossover settings for the XD600/1v2 when being used to power your Stealthbox ®
.
The JL Audio XD600/1v2 is a very versatile audio component. Please consult the owner’s manual for even more
detailed information about installing and tuning this amplifier.
M I D / H I G H F R E Q U E N C Y D R I V E R F I T M E N T
A variety of JL Audio coaxial and component systems will fit in the factory speaker locations of you vehicle.
Front Speaker Size / Location: 5”x 7” / 6”x 8”- Front Doors
Fits JL Audio Models: TR570-CXi, C2-570x, C3-570,
C5-570x, & C5-570
Rear Speaker Size / Location: 5”x 7” / 6”x 8”- Rear Door
Fits JL Audio Models: TR570-CXi, C2-570x, C3-570,
C5-570x, & C5-570
All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo, “Stealthbox” and the Stealthbox logo are registered
trademarks of JL Audio, Inc. “Ahead of the Curve” and its respective logo is a trademark of JL Audio, Inc.
JLA-SKU# 011275 01.17.2017 • Printed in USA • ©2017 JL Audio, Inc.
For more detailed information please visit us online at www.jlaudio.com.
(954) 443-1100
w w w . j l a u d i o . c o m
1 0 3 6 9 N O R T H C O M M E R C E P A R K W A Y • M I R A M A R , F L O R I D A • 3 3 0 2 5 • U S A


Product specificaties

Merk: JL Audio
Categorie: Niet gecategoriseerd
Model: Stealthbox SB-F-SUPRCC/13TW5v2/BK

Heb je hulp nodig?

Als je hulp nodig hebt met JL Audio Stealthbox SB-F-SUPRCC/13TW5v2/BK stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd JL Audio

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd