JL Audio MVi-DRCADAPT Handleiding
JL Audio
Afstandsbediening
MVi-DRCADAPT
Bekijk gratis de handleiding van JL Audio MVi-DRCADAPT (4 pagina’s), behorend tot de categorie Afstandsbediening. Deze gids werd als nuttig beoordeeld door 33 mensen en kreeg gemiddeld 3.9 sterren uit 17 reviews. Heb je een vraag over JL Audio MVi-DRCADAPT of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/4
Rotary DRC Adaptor for MVi Amplifiers
(Use with rotary-style Digital Remote Controllers only.)
MVi-DRCADAPT
Product Description:
The MVi-DRCADAPT permits the direct connection of a JL Audio rotary-style Digital
Remote Controller (DRC) to a MVi amplifier via its JLid-COMM Port.
Notes: This product is not compatible with mono MV amplifiers or the MVi-HUB.
This product is not needed for connection of M-DRC-50 push-button controller.
What is Included:
(1) MVi-DRCADAPT
(1) Mounting Clip
(2) Mounting Screws
Placement Considerations:
The MVi-DRCADAPT should be installed near the connected MVi amplifier,
where its JLid status LED can be viewed.
Installation:
1. Plug the cable end of the MVi-DRCADAPT into the JLid-COMM port of the MVi amplifier.
2. Install a compatible DRC controller (sold separately) per its instructions and connect its
cable end to the RJ45 jack of the MVi-DRCADAPT.
Mounting Clip Installation:
A mounting clip is included to secure the MVi-DRCADAPT module. Use the supplied screws
to fasten the mounting clip to a flat surface. Once the mounting clip is installed, attach the
MVi-DRCADAPT module by pressing one side of its notched center section against the
inside of one of the arms of the mounting clip. Continue pressing inward until both arms of
the mounting clip snap around the notched center section of the MVi-DRCADAPT module.
Ensure that the JLid Status LED is facing outward and visible. To remove, grasp the module’s
body and pull while rotating away from the mounting clip.
JLid Status LED:
The MVi-DRCADAPT module is equipped with a multi-color status LED.
Refer to the table below for detailed info:
MVi-DRCADAPT LED Color Status
Green JLid™ detection in progress
Blue Successful connection of a compatible DRC
Yellow Unrecognized JLid ™ device
(retry attempts result in ashing Yellow)
Yellow-Green (alternating) Faulty JLid™ device
None (JLid-COMM Port LED of the
connected MVi amplier ashes Red)
Short circuit condition of JLid ™ connection
(MVi-DRCADAPT turns OFF)
To DRC
MVi-DRCADAPT
Connects to the JLid™ COMM Port on MVi ampliers
Note: Components pictured may not be to scale.
DRC sold separately.
Product specificaties
| Merk: | JL Audio |
| Categorie: | Afstandsbediening |
| Model: | MVi-DRCADAPT |
Heb je hulp nodig?
Als je hulp nodig hebt met JL Audio MVi-DRCADAPT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Afstandsbediening JL Audio
6 Maart 2024
10 April 2023
5 April 2023
29 Maart 2023
24 Maart 2023
6 Maart 2023
23 Februari 2023
11 Februari 2023
2 Februari 2023
9 Januari 2023
Handleiding Afstandsbediening
- Zalman
- Natec
- Hama
- Tado
- Genius
- Infinity
- Nikon
- Satechi
- Online
- Packard Bell
- Neets
- Yamaha
- Watson
- Antelope Audio
- Jolly
Nieuwste handleidingen voor Afstandsbediening
22 Juli 2025
22 Juli 2025
22 Juli 2025
21 Juli 2025
21 Juli 2025
21 Juli 2025
21 Juli 2025
21 Juli 2025
21 Juli 2025
21 Juli 2025