JL Audio ETXv3 M-MCPv3-1.31 Handleiding
JL Audio
Grillplaat
ETXv3 M-MCPv3-1.31
Bekijk gratis de handleiding van JL Audio ETXv3 M-MCPv3-1.31 (7 pagina’s), behorend tot de categorie Grillplaat. Deze gids werd als nuttig beoordeeld door 48 mensen en kreeg gemiddeld 4.8 sterren uit 24.5 reviews. Heb je een vraag over JL Audio ETXv3 M-MCPv3-1.31 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/7

Installation Instructions for
M-MCPv3-1.315 • M-MCPv3-1.660 • M-MCPv3-1.900
M-MCPv3-2.000 • M-MCPv3-2.250
M-MCPv3-2.375 • M-MCPv3-2.500
PI PE M O U N T IN G FI X T UR E S (FI XE D)
FOR ET Xv3 ENCLOSED SPEAKER SYSTEMS

ere are two speaker cable routing options. For
applications where the cable cannot be routed through
the pipe, the cable can be passed through one of the
openings on the side of the xture.
1A
Determine the speaker mounting location, and
temporarily secure the two xture halves around the pipe
by hand tightening the four 1/4 - 20 x 1-1/4” machine
screws.
2
For applications where the cable can be routed through
the pipe, the cable can be passed through the opening on
the underside of the xture. Steps 2-3 are only needed
for this option.
1B
Adjust the angle of the xture to the to the desired
position, and mark the location for the speaker cable
hole. Remove the xture assembly, and drill a 1/2” hole
on the mark.
3
OR

Apply Loctite® red thread-locking compound (included)
to two 5/16 - 18 x 1-1/4” machine screws (included),
thread them into the lower half of the xture, and
push down on the xture to ensure no gap while fully
tightnening.
4
Slide the excess speaker cable and the butt connectors
into the opening in the pipe as you raise the enclosure to
ush the xture to the pipe.
6
Have a helper support the enclosure during this step.
Use the supplied butt connectors to connect the red (+)
and black (-) speaker cable exiting the ETXv3 enclosure
to the speaker cable exiting the pipe. e green and white
wires will not be used in this application.
5
Align the upper and lower halves of the xture around
the pipe. Hand-tighten four 1/4 - 20 x 1-1/4” machine
screws into the xture. DO NOT TIGHTEN FULLY AT
THIS POINT.
7
Product specificaties
Merk: | JL Audio |
Categorie: | Grillplaat |
Model: | ETXv3 M-MCPv3-1.31 |
Heb je hulp nodig?
Als je hulp nodig hebt met JL Audio ETXv3 M-MCPv3-1.31 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Grillplaat JL Audio
31 Maart 2023
21 Februari 2023
2 Februari 2023
28 Januari 2023
12 Januari 2023
Handleiding Grillplaat
- Miele
- H.Koenig
- Hanseatic
- Simeo
- Medion
- Cosmo
- SpidoCook
- Wells
- Ideal
- Imperial
- Princess
- DistinQ
- Turbotronic
- Clatronic
- Melchioni
Nieuwste handleidingen voor Grillplaat
29 Juli 2025
29 Juli 2025
28 Juli 2025
28 Juli 2025
24 Juli 2025
21 Juli 2025
15 Juli 2025
14 Juli 2025
7 Juli 2025
7 Juli 2025