JL Audio 15W0v2 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor JL Audio 15W0v2 (4 pagina's) in de categorie Auto subwoofer. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
15WØv2-4
Subwoofers
owner’s manual
Congratulations on your purchase of a JL Audio subwoofer component. Your JL Audio subwoofer is a
precision loudspeaker which has been engineered to produce the highest quality sub-bass performance
in your vehicle. Authorized JL Audio dealers have extensive technical information for many different
applications of your new speaker. They also have the knowledge, skills and tools to build a high-quality
enclosure that will maximize the performance of your speaker. We highly recommend that you have your
enclosure built by an authorized JL Audio dealer.
Inside you will find specifications and two recommended enclosures for your speaker; one is a sealed
enclosure, the other is a ported design. Both types of enclosures will give you excellent sound quality and
low-frequency extension. The sealed enclosure is a better choice if space is extremely tight, but the ported
enclosure will produce 3dB more output at the same power if you have the extra space to work with.
2 JL AUDIO 15WØv2-4
SUBWOOFER 15WØv2-4
Free Air Resonance (Fs): 24.43 Hz
Electrical “Q” (Qes): 0.508
Mechanical “Q” (Qms): 9.474
Total Speaker “Q” (Qts): 0.482
Equivalent Compliance (Vas): 5.106 ft3
144.60 liters
One-way, Linear Excursion (Xmax)*: 0.50 in.
12.7 mm
Efficiency (1W/1m)**: 88.20 dB SPL
Effective Piston Area (Sd): 122.317 in2
0.0789 m2
DC Resistance (Re): 3.555 ohm
Nominal Impedance: 4 ohm
Power Handling (continuous): 500 W
* Xmax specifications are derived via one-way voice coil overhang method
with no correction factors applied.
** Efficiency (1W/1m) is not an accurate indicator of a subwoofer’s output
capability and should not be used as a comparison to other subwoofers
to determine which one is “louder” !
A
BE
D
C
15WØv2 SUBWOOFER PHYSICAL
SPECIFICATIONS
Nominal Diameter: 15.0 in.
380 mm
Overall Diameter (A): 15.5 in.
394 mm
Mounting Hole Diameter (B): 13.75 in.
349 mm
Bolt Hole Circle (C): 14.56 in.
370 mm
Magnet Diameter (D): 6.3 in
160 mm
Mounting Depth (E): 7.15 in.
182 mm
Net Weight: 15.8 lbs.
7.2 kg
Driver Displacement: 0.109 ft3
3.09 liters
JL AUDIO 15WØv2-4
U.S. PATENT: #6,219,431
JL AUDIO 15WØv2-4 3
SUBWOOFER RECOMMENDED SEALED ENCLOSURE
Volume
(net int.)
External Dimensions
(Width x Height x Depth)
F3
(Hz)
Fc
(Hz) Qtc
15WØv2-4 1.875 ft³
53.10 litres
16 in. x 15.75 in. x 18 in.
407 mm x 400 mm x 457 mm 38 47.14 0.9301
All specifications are subject to change without notice.
SUBWOOFER RECOMMENDED PORTED ENCLOSURE
Volume
(net int.)
Enclosure External Dimensions
(Width x Height x Depth)
Round Port Specs
(Inner Diameter x Length)
Tune to:
(Hz)
F3
(Hz)
15WØv2-4 2.75 ft³
77.88 liters
20 in. x 18 in. x 18.5 in.
508 mm x 457 mm x 470 mm
4 in. x 16.85 in.
102 mm x 428 mm 25.0 30.0
!! CAUTION !!
Prolonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance
speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity.
When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend
bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers
for reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly
important in a hatchback, station wagon, sports utility vehicle, or van.
The enclosure recommendations listed are external
dimensions which assume the use of 3/4" (19mm)
thick material. If you are using 5/8" (16mm) thick
material, subtract 1/4" (6.5mm) from each dimension.
Do not use any material with a thickness of less than
5/8" (16mm) as this may compromise the rigidity of
the enclosure.
All enclosure volumes listed are net internal
volumes! Box volume displacement, port
displacement and brace displacement must be
added to obtain the final gross internal volume. All
enclosure dimensions listed have already taken this
into account.
When using two subwoofers in a common
enclosure simply double the required volume and,
in the case of a ported enclosure, use two times the
recommended port(s).
We recommend the use of this speaker in a bi-amplified
system using high-quality satellite speakers and
amplifiers. We do not recommend the use of this
subwoofer with a passive crossover (coil), as this type of
device will adversely affect performance.


Product specificaties

Merk: JL Audio
Categorie: Auto subwoofer
Model: 15W0v2

Heb je hulp nodig?

Als je hulp nodig hebt met JL Audio 15W0v2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden