Jetson MotoKicks Handleiding

Bekijk gratis de handleiding van Jetson MotoKicks (2 pagina’s), behorend tot de categorie Zelfbalancerende scooter. Deze gids werd als nuttig beoordeeld door 24 mensen en kreeg gemiddeld 4.4 sterren uit 5 reviews. Heb je een vraag over Jetson MotoKicks of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Product Overview

Charging your MotoKicks

Getting Started

Battery Indicator Lights

How to Recalibrate

Specs & Features

a. Power Button

b. Mat Sensor

c. Carrying Handle

d. Battery Indicator Lights

e. Charging Port

f. Wheel

g. Training Bar

h. Training Bar Screws (x4)

i. Side Plate

j. Charger

k. Charging Cable

(On opposite side)

Please Note: Images may not relect exact appearance of actual product.

Note: it can take up to 3 recalibration attempts to achieve proper internal alignment.

* Keep the MotoKicks leveled and still throughout the recalibration process.

While recalibrating, do not lean on or put any weight on the MotoKicks.

• Product Dimensions: 10.6” (L) × 5.5” (W) × 4.5” (H) (Each)

• Weight Limit: 220 lbs

• Product Weight: 6.0 lbs (Each)

• Wheel Size: 3.5”

• Max Speed: 7 mph

• Max Range: 6 miles

• Battery: 25.9V, 1.9Ah Lithium-Ion (Each)

• Motor: 250W Hub Motor (Each)

• Charger: 100-240V

• Charging Time: Up to 3 Hours

• Climbing Angle: Up to 10°

• Recommended Age: 13+

• Only use the included charger.

• Plug the charger into the wall before the charging port.

• Never turn on the MotoKickswhile they are charging.

• Charge the battery until it is fully charged before using — up to 3 hours.

• Replace the cover over the charging port when done.

• Never leave the MotoKicks charging overnight.

• Charger Indicator Light:

If you can ride a hoverboard, you can ride Jetson MotoKicks.

- Charging

- Charge Complete

Battery Indicator Lights

Charger Indicator Light

Power Button

Important: As a safety precaution, Motokicks will automatically turn off

when they battery charge level goes below 10%.

Follow these 3 simple steps:

1. Turn the MotoKicks off and place them on a lat, level surface.

2. Hold each Power Button for about 5 seconds until the lights

lash and the MotoKicks beep.

3. Restart the MotoKicksby turning them off and then back on.

1. Lean slightly forward to move

forward. You got this!

2. Lean slightly backward to move

in reverse or brake.

3. Turn by leaning to the side as

you ride. Way to go!

4. Step o when the MotoKicks are

at complete stop. Just step back-

wards one foot at a time.

Great riding!

Lights

> 20%20-30%

30% +

Charge

Percentage

a.

i.

d.

e.

c.

f.

j.k.

b.

h.g.

How it Works

Riding your MotoKicks

Helmet Safety

• Power On: Place on level ground, then turn on each MotoKick by

quick-pressing the Power Button.

• Balance Mode: Gently tilt both MotoKicks and they will self-stabilize.

Master your

MotoKicks!

Scan this for

more riding tips.

Improper positioning:

The forehead is exposed.

A fall could result in serious injury.

Proper positioning:

The forehead is covered

by the helmet.

* Wear a helmet, appropriate clothing, shoes, and safety gear. Avoid clothing

that can get caught into or under the wheels. Closed-toe, lat shoes are

recommended. Wear an ASTM F1492 approved helmet and protective gear to

prevent injury in the event of an accident.

If your Motokicks are not performing as they should, are beeping or

spinning, or feel o balance, their internal balance mechanisms need to

be realigned. This is called “recalibrating.”

Product specificaties