Jensen JW6A Handleiding


Bekijk gratis de handleiding van Jensen JW6A (6 pagina’s), behorend tot de categorie Subwoofer. Deze gids werd als nuttig beoordeeld door 8 mensen en kreeg gemiddeld 4.9 sterren uit 4.5 reviews. Heb je een vraag over Jensen JW6A of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/6
6.5" Compact Amplified Subwoofer
NSA0625-V01
1-888-921-4088
2025
JW6A
2
Getting Started
Although Jensen has attempted to ensure the information in this manual is
accurate, please be aware that any part of it is subject to change without notice.
Please read entire manual before installation. Due to the technical nature of
ampliers, it is highly recommended that your Jensen JW6A is installed
by a professional installer or an authorized dealer.
Before You Start
Always disconnect the negative battery terminal. Consult a qualied technician
for instructions if you are unsure.
Avoid installing the amplier where it would be subject to high temperatures,
such as from direct sunlight, or where it would be subject to dust, dirt or
excessive vibration.
Use extreme caution when drilling holes to avoid damaging fuel lines or
existing vehicle wiring.
An amplier installation kit and RCA cable (sold separately) is highly recommended
to facilitate the installation. Consult your dealer for recommendations.
Mounting
Location
For optimum performance, make sure to provide at least 1" of space around all
sides of the amplier.
Do not mount the JW6A under carpets or where airow is restricted.
Do not install the JW6A where it may be exposed to moisture.
The optimum mounting location varies between vehicles. Remember to test all
amplier functions before completing the nal mounting procedure.
11
200W
Amplifier
RMS Power Output
600 Watts
30-150Hz
Maximum Output Power
Frequency Response
Low level (RCA): 10k ohms
High level (speaker wire): 200 ohms
200mV – 5V
50–150Hz
0–180 degrees
20A x 1
11.42" x 7.87" x 3.05"(W x D x H)
6.5"
2 ohms
30 oz.
Aluminum
Rubber
Design and specications subject to change
without notice.
Input Impedance
Input Sensitivity (LOW)
1V – 12V
Input Sensitivity (HIGH)
Low Pass FIlter
Phase
Fuse
Dimensions
Subwoofer Features
Woofer size
Impedance
Magnet
Cone material
Surround material
Specifications
10
3
The following installation instructions are intended to be used as a basic
guideline. If you feel unsure about installing this speaker system yourself,
Jensen
recommends acquiring the services of a professional car audio
installation center.
Before installation, please review the following guidelines:
1. Be sure to carefully read and understand the instructions before attempting to
install this product.
2. If additional wiring is required, we recommend running all wires prior to
mounting your enclosure in place.
3. To ensure reliable performance and minimize signal or power loss, use the
highest quality connectors available.
4. Never run speaker wires underneath your vehicle. Running speaker wires
inside the vehicle provides the best protection from exhaust, heat and
environmental elements.
5. Avoid running wires over, near or through sharp-edged surfaces. We suggest
you also use rubber grommets to protect any wires routed through metal,
especially the rewall.
6. When running the RCA cable to the amplier, avoid running it near sources
of high current (i.e. wiring harnesses, battery cables).
Safety First
The following instructions are designed to ensure safety during installation and
use of the JW6A. Failure to heed these instructions can result in injury or damage
to the unit or vehicle.
CAUTION
!


Product specificaties

Merk: Jensen
Categorie: Subwoofer
Model: JW6A

Heb je hulp nodig?

Als je hulp nodig hebt met Jensen JW6A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Subwoofer Jensen

Jensen

Jensen JW6A Handleiding

26 Augustus 2025
Jensen

Jensen JW10A Handleiding

16 Maart 2023
Jensen

Jensen XS10S Handleiding

21 Februari 2023
Jensen

Jensen J12W Handleiding

19 December 2022

Handleiding Subwoofer

Nieuwste handleidingen voor Subwoofer