JennAir IC13B Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor JennAir IC13B (40 pagina's) in de categorie Koelkast. Deze handleiding was nuttig voor 46 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/40
2
Important Safety Information
Recognize Safety Symbols, Words, Labels
DANGER!
DANGER—Immediate hazards which WILL result in severe personal injury or
death.
WARNING
!
WARNING—Hazards or unsafe practices which COULD result in severe personal
injury or death.
CAUTION
!
CAUTION—Hazards or unsafe practices which COULD result in minor personal
injury or product or property damage.
What You Need to Know about
Safety Instructions
Warning and Important Safety Instructions
appearing in this manual are not meant to
cover all possible conditions and situations
that may occur. Common sense, caution, and
care must be exercised when installing,
maintaining, or operating refrigerator.
Read entire manual before installing kit. All
necessary tools and materials must be
available prior to installation. Verify all listed
parts are included in kit. If parts are missing,
contact source from whom kit was purchased.
• If unable to solve a problem during
installation, refer to your refrigerators
owners manual for service information.
Before Calling Service...
If something seems unusual, please check
“Trouble Shooting” section, which is
designed to help you solve problems before
calling service.
WARNING!
To avoid electrical shock which can cause severe personal injury or death, follow
basic precautions, including the following:
• Unplug power cord or open household circuit breaker to refrigerator before installing kit. After
installing kit, reconnect power.
CAUTION!
To avoid risk of personal injury or property damage, follow basic precautions,
including the following:
• Do not place fingers or hands on or around the automatic icemaking mechanism while the refrig-
erator is plugged in.
• REPLACE ORIGINAL ICE STORAGE BUCKET WITH ONE FROM KIT to avoid spilling ice cubes.
• Confirm water pressure to water valve is between 20 and 100 pounds per square inch. If water
filter is installed, water pressure to water valve must be a minimum of 35 pounds per square inch.
• Start nuts by hand to avoid cross threading. Finish tightening nuts using a wrench. Do not over-
tighten.
• Check carefully for water leaks prior to returning refrigerator to normal location and 24 hours after
connection.
3
Water fills the empty
cube mold when the
freezer has cooled to
freezing
temperature. Cold
air is forced directly
over the mold.
How the Ice Maker Works
When frozen, the
cubes are moved up
and out of the mold.
The sweeper arm (A)
ejects them into the
ice storage bin (B)
below.
About Your Ice Maker
1
2
A
B
How to Use Your Ice Maker
1To start ice maker, lower feeler arm
to ‘on’ position.
• Make sure ice storage
bin is below ice maker
and pushed back as
far as possible.
2Allow approximately 24 hours after
installation to receive first harvest of ice.
• Discard ice created within first 12 hours of
operation to verify system is flushed of
impurities.
NOTE: Feeler arm must be free to move upward
and outward over ice storage bin for ice production.
Make sure packages in freezer compartment do not
block its movement.
When is it appropriate to shut off my ice
maker?
Raise the feeler arm to the STOP (up) position when:
•Ice storage bin is removed, or is being cleaned.
•Refrigerator is not to be used for an extended time, such as
vacations. Also, turn off the water supply to the ice maker
in this instance.
•Water supply is to be shut off for several hours.
My ice cubes have an odor. What can I do
to avoid this?
Ice is a porous material and is likely to absorb odors from
surrounding areas. Ice cubes that have been in the ice storage
bin for a considerable length of time may pick up off-flavor
tastes, stick together, and gradually become smaller. We
suggest that these cubes be thrown away.
Other ways to control ice cube odor are listed below.
• The ice storage bin should be cleaned occasionally in warm
water. Be sure to put the icemaker feeler arm in the STOP
(up) position when cleaning the bin. Rinse and wipe dry.
• Check for spoiled or expired items and discard. Wrap all
odor-causing foods, or store foods in tightly-sealed
containers to prevent odor reoccurrence.
• Water filter (some models) may need to be replaced.
• In some cases, household water quality may need to be
checked. If a water filter is desired, a water filter may be
ordered for some models. Contact your dealer for more
information on your particular model.
Is it possible for the ice maker to overfill
the storage bin ?
The feeler arm (C) senses when the
bin (B) is full and signals the icemaker
to stop ejecting cubes. The mold
refills and freezes a new supply.
Once the feeler arm senses that more
is needed, the ice maker resumes
operation by ejecting the frozen cubes.
B
C


Product specificaties

Merk: JennAir
Categorie: Koelkast
Model: IC13B

Heb je hulp nodig?

Als je hulp nodig hebt met JennAir IC13B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Koelkast JennAir

Handleiding Koelkast

Nieuwste handleidingen voor Koelkast