JCB 46S Combi Handleiding

JCB Grasmaaier 46S Combi

Lees hieronder de 📖 handleiding in het Nederlandse voor JCB 46S Combi (12 pagina's) in de categorie Grasmaaier. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
Safety and operating manual
Pedestrian Lawnmowers
JCB 46S COMBI
JCB, SO53 3LE
www.JCBDIY.com
Customer Helpline 0845 6005526
ORIGINAL INSTRUCTIONS
JCB rsb 46S_11-171503977/0:JCB rsb 46S_11-171503977/0 7-12-2010 10:16 Pagina 1
JCB, SO53 3LE
www.JCBDIY.com
Customer Helpline 0845 6005526
Identification label, main components and symbols
2
7 6 59
234
8 1
Identification label
1. Conformity mark according to directive
2006/42/CE
2. Type of machine
3. Weight in kg
4. Operating engine power and speed
5. Acoustic power level according to directive
2000/14/CE
6. Serial number
7. Name and address of manufacturer
8. Article Code
9. Year of manufacture
11 13
15 16
18
14
19
17
12
Identification of main components
11. Chassis
12. Blade
13. Engine
14. Handle
15. Stone-guard
16. Grass-catcher
17. Drive engagement lever
18. Engine brake lever
19. Throttle control
Symbols of safety requirements
Your lawnmower should be used with due care and
attention. Symbols have therefore been placed on
various parts of the machine to remind you of the
main precautions to be taken. Their meaning is
explained below. You are also asked to carefully
read the safety regulations in the applicable chapter
of this handbook.
21. Important: Read the instruction handbook before
using the machine.
22. Danger of thrown objects. Keep other people at a
safe distance whilst working.
23. Danger of cutting. Blades in movement. Do not
put hands or feet near the blades. Remove the
spark plug lead and read instructions before car-
rying out any repair or maintenance.
24. Only for electric lawnmowers.
25. Only for electric lawnmowers.
21
22
23
24
25
JCB rsb 46S_11-171503977/0:JCB rsb 46S_11-171503977/0 7-12-2010 10:16 Pagina 2
JCB, SO53 3LE
www.JCBDIY.com
Customer Helpline 0845 6005526
Safety Regulations - To be followed carefully
3
A) TRAINING
1) Read the instructions carefully. Get familiar with the controls
and proper use of the equipment. Learn how to stop the engine
quickly.
2) Only use the lawnmower for the purpose for which it was
designed, i.e. for cutting and collecting grass. Any other use can
be hazardous, causing damage to the machine. Examples of
improper use may include, but are not limited to:
– transport of people, children or animals on the machine;
– being transported by the machine;
– using the machine to tow or push loads;
– using the machine for leaf or debris collection;
– using the machine to trim hedges, or for cutting vegetation
other than grass;
– use of the machine by more than one person;
– using the blade on surfaces other than grass.
3) Never allow children or people unfamiliar with these instructions
to use the lawnmower. Local regulations may restrict the age of
the operator.
4) Never use the lawnmower:
– When people, especially children, or pets are nearby.
– If the operator has taken medicine or substances that can affect
his ability to react and concentrate.
5) Remember that the operator or user is responsible for accidents
or hazards occurring to other people or their property.
B) PREPARATION
1) While mowing, always wear sturdy footwear and long trou sers.
Do not operate the equipment when barefoot or wea ring open
sandals.
2) Thoroughly inspect the area where the equipment is to be used
and remove all objects which may be thrown by the ma chine or
damage the cutter assembly and the engine (stones, sticks, metal
wire, bones, etc.)
3) WARNING: DANGER! Engine fuel is highly flammable:
– Store fuel in containers specifically designed for this purpose.
– Refuel using a funnel and outdoors only. Do not smoke while
refuelling or whenever handling the fuel.
– Add fuel before starting the engine. Never remove the cap of the
fuel tank or add fuel while the engine is running or when the
engine is hot.
– If fuel is spilled, do not attempt to start the engine but move the
machine away from the area of spillage and avoid crea ting any
source of ignition until the fuel has evaporated and the vapour
dispersed.
– Replace all fuel tanks and containers caps securely.
4) Substitute faulty silencers.
5) Before use, always inspect the machine, especially the condi-
tion of the blades, and check that the screws and cutting assem-
bly are not worn or damaged. Replace worn or damaged blades
and screws in sets to preserve balance.
6) Before mowing, attach the discharge opening guards (grass-
catcher or stone-guard).
C) OPERATION
1) Do not operate the engine in a confined space where dange rous
carbon monoxide fumes can collect.
2) Mow only in daylight or good artificial light.
3) If possible, avoid operating the equipment in wet grass.
4) Always be sure of your footing on slopes.
5) Walk, never run and do not allow yourself to be pulled along by
the lawnmower.
6) Mow across the face of slopes, never up and down.
7) Exercise extreme caution when changing direction on slo pes.
8) Do not mow on slopes of more than 20°.
9) Exercise extreme caution when pulling the lawnmower to wards
you.
10) Stop the blade if the lawnmower has to be tilted for trans-
portation when crossing surfaces other than grass, and when
transporting the lawnmower to and from the area to be mowed.
11) Never operate the lawnmower with defective guards, or with-
out safety devices, such as the stone-guard and/or grass-catcher,
in place.
12) Do not change the engine governor settings or overspeed the
engine.
13) On power-driven models, disengage the drive clutch before
starting the engine.
14) Start the engine carefully, following the instructions and keep-
ing feet well away from the blade.
15) Do not tilt the lawnmower when starting the engine. Start the
engine on a flat surface that is free of obstacles and tall grass.
16) Do not put hands or feet near or under rotating parts. Keep
clear of the discharge opening at all times.
17) Never pick up or carry a lawnmower while the engine is run-
ning.
18) Stop the engine and disconnect the spark plug wire:
– Before carrying out any work underneath the cutting deck or
be fore unclogging the chute;
– Before checking, cleaning or working on lawnmower;
– After striking a foreign object. Inspect the lawnmower for da -
mage and make repairs before restarting and operating the
lawn mower;
– If the lawnmower begins to abnormally vibrate (Immediate look
for the cause of the vibrations and take for necessary controls
at a Specialised Centre).
19) Stop the engine:
– Whenever you leave the lawnmower unattended. Remove the
key from models with electric starters.
– Before refuelling.
– Every time you remove or replace the grass-catcher.
– Before adjusting the grass cutting height.
20) Reduce the throttle before turning off the engine and turn the
fuel off when you have finished mowing, following the in structions
in the engine handbook.
21) When mowing, always keep to a safe distance from the ro -
tating blade. This distance is the length of the handle.
D) MAINTENANCE AND STORAGE
1) Keep all nuts, bolts and screws tight to be sure the equipment
is in safe working condition. Regular maintenance is es sential for
safety and performance.
2) Never store the equipment with fuel in the tank inside a building
where vapour may reach a flame or a spark or a source of extreme
heat.
3) Allow the engine to cool before storing in an enclosed space.
4) To reduce the fire hazard, keep the engine, exhaust si len cer,
battery compartment and fuel storage area free of grass, leaves,
or excessive grease. Do not leave containers with grass cuttings
in rooms.
5) Check the stone-guard and grass-catcher frequently for wear
and deterioration.
6) If the fuel tank has to be drained, this should be done outdoors
and when the engine is cool.
7) Wear strong work gloves when removing and re assembling the
blade.
8) Keep the blade balanced during sharpening. All operations on
the blade (dismantling, sharpening, balancing, re moun ting and/or
replacing) require a certain familiarity and special tools. For safety
reasons, these jobs are best carried out at a specialized centre.
9) For safety reasons, never use the machine when it has worn or
damaged parts. Parts are to be replaced and not repaired. Use
genuine spare parts. Parts that are not of the same quality can
damage the equipment and impair your safety.
E) TRANSPORTATION AND HANDLING
1) Whenever the machine is to be handled, raised, transported or
tilted you must:
– wear strong working gloves;
– grasp the machine at the points that offer a safe grip, taking
account of the weight and its distribution.
– use an appropriate number of people for the weight of the
machine and the characteristics of the vehicle or the place
where it has to be placed or collected.
2) During transport, fasten the machine securely with ropes or
chains.
JCB rsb 46S_11-171503977/0:JCB rsb 46S_11-171503977/0 7-12-2010 10:16 Pagina 3

Product specificaties

Merk: JCB
Categorie: Grasmaaier
Model: 46S Combi

Heb je hulp nodig?

Als je hulp nodig hebt met JCB 46S Combi stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Grasmaaier JCB

JCB

JCB Mulcher 48 Handleiding

6 Januari 2024
JCB

JCB Mulcher 48 S Handleiding

4 Januari 2024
JCB

JCB 46S Combi Handleiding

24 Oktober 2022

Handleiding Grasmaaier

Nieuwste handleidingen voor Grasmaaier

Garda

Garda GBR 51 S HW Handleiding

25 April 2024
Garda

Garda GAR 40 S-P Handleiding

25 April 2024
Bestgreen

Bestgreen BG Serie 1 36 Li Handleiding

18 April 2024
Powerbase

Powerbase PBPM 40P Handleiding

18 April 2024
Worx

Worx WG330E Handleiding

17 April 2024
Fieldmann

Fieldmann FZR 5316-170B Handleiding

11 April 2024
Fieldmann

Fieldmann FZR 4006-80BH Handleiding

11 April 2024
Cub Cadet

Cub Cadet Ultima ZTS1 46 Handleiding

9 April 2024
Cub Cadet

Cub Cadet Tank M72-CAT Handleiding

9 April 2024
Cub Cadet

Cub Cadet Tank M60 KH Handleiding

9 April 2024