JBL VP7315 Handleiding

JBL Speaker VP7315

Lees hieronder de 📖 handleiding in het Nederlandse voor JBL VP7315 (4 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

Key Features:



Powered bi-ampliﬁed full-range

loudspeaker with JBL DrivePack®tech-

nology for portable or installed use



2200 watts peak output power,

1100 watts continuous



15-inch Differential Drive®

low-frequency driver for extended

low-frequency output



60° x 40° coverage



Stylized and ergonomically designed

powder-coated die cast aluminum

handles



Six 3-inch ﬂy track suspension points

and twelve M10 ﬁttings (optional

detachable ﬂying ﬁttings and forged

eye bolt kits available)



Optional DPAN or DPCN (CobraNet™)

digital audio input modules available

Applications:



High-impact audio/visual

presentations

 Theatrical sound design

 Houses of Worship

 Sound reinforcement rental companies

 Live performance venues

 Performing arts centers

 Corporate learning centers

 Themed entertainment venues

The VP7315/64DP is a powered 15"

3-way integrated loudspeaker system

featuring 2200 watts of peak output

power, 1100 watts continuous, and

onboard digital signal processing.

Designed in cooperation with Crown

International, the JBL DrivePack®DP-2

features leading-edge technology such

as patented high efﬁciency Class-I

power ampliﬁer technology. Network

control and monitoring is optionally

available via System Architect software.

VP7315/64DP transducers are JBL’s

2265G 15" diameter Differential Drive®

woofer, CMCD-82 mid-range driver

and the JBL 2452H-SL large format 1.5"

exit compression driver. The mid-fre-

quency and high frequency drivers are

coupled to a JBL PT-K64-MHF

Progressive Transition (PT) Waveguide

for excellent 60° x 40° pattern control,

smooth frequency response, and low

distortion. Easily rotated for horizontal

or vertical system orientation.

Speciﬁcations:

Frequency

Response (+/-3 dB): 43 Hz - 18 kHz

Frequency Range (-10 dB): 34 Hz - 20 kHz

Coverage Pattern: 60° x 40° rotatable waveguide

Directivity Factor (Q): 15.85

Directivity Index (DI): 12 dB

Maximum Peak Output1: 138 dB SPL 1m

Transducer Section:

Low Frequency Section: JBL 2265G, 381 mm (15 in) dia., 76 mm (3 in) Dual Coil

neodymium Differential Drive®, Direct Cooled

Bandpass Nominal Impedance: 4 ohms

Mid/High Frequency Section:

Mid Frequency: JBL CMCD-82H, 200 mm (8 in) Dual Coil Differential

Drive®transducer

High Frequency: JBL2452H-SL, 100mm (4 in) titanium damped diaphragm,

1.5 in. exit.

Waveguide: JBL PT-K64-MHF

Bandpass Nominal Impedance: 8 ohms

System:

DP2 Internal Ampliﬁcation Output

(at nominal load): 2200 Watts Peak, 1100 Watts Continuous

DP2 Output (Continuous IEC shaped pink

noise into rated load impedance): 750LF/350HF Watts

DP2 Output Section: 2-Channel, Class I

Audio Input connector: XLR with loop-through

Network control connector: Ethernet, RJ45 (DPAN, DPCN options)

Signal Processing: DSP based, resident in Input Module. See page 2 For input

module speciﬁcations.

System Management: DSP based limiters for mechanical and thermal protection

AC Power Operating Range: Auto Select 90-132VAC/216-264VAC, 50/60 Hz

AC Line Voltage: 50/60 Hz, Auto-Detect; 120V/240V (-15%, +10%)

AC Input Connector: Neutrik PowerCon

AC Loop-thru: Neutrik PowerCon

AC Current Requirement: 6A per system at 120V, 3A per system at 240V

Enclosure:

Box Construction: 5/8 in. multi-ply exterior grade Baltic birch. Internally

braced. Black DuraFlex™ ﬁnish.

Suspension System: 6 standard air-cargo 3 in. track and 12 M10 ﬁttings.

Grille: 14 Gauge Black powder-coated perforated steel with foam

backing.

Dimensions (H x W x D): 914.4 x 528.3 x 624.8 mm

36 x 20.8 x 24.6 in.

Net Weight: 44 kg (97 lb

s.)

1Measured with IEC shaped noise in free ﬁeld conditions.

VP7315/64DP

VP7315/64DP-AN (Optional network input module)

VP7315/64DP-CN (Optional network input module with digital audio)

Powered 15"

3-Way Integrated

Loudspeaker System

 VP7315/64DP Powered 15" 3-Way Integrated Loudspeaker System

Input module characteristics and options

Features

Description DPIP DPAN DPCN

(standard input module) (optional HiQnet network (optional HiQnet network

input module) input module) input module; digital audio)

HiQNet Compliant No Yes Yes

Network Communication No 100MB Ethernet 100MB Ethernet

Network Connections N/A RJ-45, CAT5 RJ-45, CAT5

Audio signal format Analog Analog Digital with analog backup

CobraNet™ digital audio over ethernet No No Yes

Level Controls Attenuator, 16dB range Network Controllable Network Controllable

Remote Load Monitoring No Yes Yes

User Assignable Filters No 16 16

User Accessible Delays No Yes Yes

Noise Generator No Pink, White Pink, White

Sine Wave Generator No Continous, Burst Continuous, Burst

User Assignable Filter Types None 9 9

Error Reporting No Yes, via software Yes, via software

Digital Speaker Setting Presets 2, ﬁxed 10, user assignable 10, user assignable

Polarity Reverse No Yes, via software Yes, via software

Listen Bus line level remote monitor No No Yes

Firmware upgrades via network No Yes Yes

Mute No Remote via network Remote via Network

JBL DrivePack®Software Control Panel

With optional HiQnet-compatible input modules installed, JBL

DrivePack systems can be remotely controlled and monitored

using HiQnet System Architect™ software. A Windows-based

application, it provides an intuitive, uniﬁed platform for system

conﬁguration and operation of JBL DrivePack-equipped systems

and any other HiQnet-compliant audio devices in the signal

chain. HiQnet System Architect enables the uniﬁed layout of on-

screen product control surfaces, and simple preset conﬁguration

of an entire system across multiple brands and product classes.

Advanced remote control and diagnostic capabilities, custom

control panel creation, and the recall of presets on all connected

HiQnet devices are included. In addition, the application

enables a user to copy / paste like parameter values from, and

to, multiple products across the HiQnet network.

HiQnet System Architect is available for download at

harmanpro.com.

Speciﬁcations

Analog Audio Input Connectors XLR, female XLR, female XLR, female

Input Type Electronically Balanced, RF Filtered

Signal Loop-through XLR, male, passive pass-through

Input Impedance 20K Ohms Bal 20K Ohms Bal 20K Ohms Bal

Polarity (+) voltage on XLR pin 2 yields (+) LF pressure

Input Sensitivity at 1m 0 dBu: 122 dB spl 0 dBu: 122 dB spl 0 dBu: 122 dB spl

0 dBV: 120 dB spl 0 dBV: 120 dB spl 0 dBV: 120 dB spl

(Input attenuator set at 0 dB) (Internal sensitivity set to +4dBu) (Internal sensitivity set to +4 dBu)

Max Input Level +23 dBu

Frequency Response 20 Hz – 20K Hz ± 0.5 dB

DSP Processing dbx Type IV analog-to- 24 Bit conversion, 32 bit 24 Bit conversion, 32 bit

digital conversion circuitry ﬂoating point processing ﬂoating point processing

Dynamic Range (20-20 KHz) > 107 dB (A Weighted) > 110 dB (A Weighted) > 110 dB (A Weighted)

THD+N (20-20 KHz), rated power < 0.5%

Crosstalk > 60 dB @ 1kHz

User Programmable Signal Delay N/A 2 seconds 2 seconds

Front Panel Controls Gain, Sub Filter Enable Enable ALT Preset Enable ALT Preset

Front Panel Indicators Signal/clip, ready, thermal, Signal/clip, ready, thermal, Signal/clip, ready, thermal,

fault, sub ﬁlter on/off fault, alt. preset select, fault, alt. preset select,

Network: activity, link Network: acivity, link,

CobraNet conductor

DPIP (Standard dbx Input Module)

JBL DrivePacks are equipped with a modular input bay and are available in several

versions. The standard DPIP input module features analog audio inputs and

sophisticated onboard digital signal processing technology. Precision bandpass

limiting, pre-equalization ﬁlters and automatic self-test functions ensure optimized

performance. Front panel controls include a 32-position detented rotary attenuator

calibrated in 0.5 dB steps which provides a 16 dB range of control. This can be

useful for setting up downﬁll shading or overall system gain structuring. Another

feature is the “Enable Subwoofer Filter” button. This is a momentary-contact type

switch which enables or disables the selected function. On subwoofer applications,

the low-pass frequency is set to 80 Hz. For full-range systems used with subwoofers,

the high-pass is raised to 80 Hz.

DPAN (Optional HiQnet Network Input Module with Analog Audio)

In addition to all of the features included on the standard input module, the DPAN

adds 100 Mb Ethernet networking functionality and HiQnet compatability. It enables

remote control and monitoring via HiQnet System Architect™ software. Network

Control and Monitoring is enabled by the JBL DP-SCP (DrivePack Software Control

Panel) supplied within HiQnet System Architect. Network capabilities include

monitoring of status, input and output levels, clipping, temperature, load faults and

gain reduction. Additional control features available in software include load

supervision, dynamic processing, ten internal pre-e.q.ﬁlter presets, delays, onboard

noise and sine-wave generators, network device event logging, and user alert

messaging.

DPCN (Optional HiQnet Network Input Module with Digital Audio)

In addition to all of the features included on the DPAN, the DPCN input module adds

CobraNet™ to the mix and offers the ability to direct up to 64 audio channels on one

network, with digital audio and remote control and monitoring via Ethernet combined

on a single cable. DPCN includes the option to use an analog input as a backup

audio source providing you complete reliability and ﬂexibility to cover any situation.

With HiQnet System Architect providing the software user interface, the HiQnet com-

munications protocol provides remote access to digital speaker preset ﬁles in the JBL

DrivePack. As with the DPAN, user-addressable features include ten internal pre-e.q.

ﬁlter presets, up to 2 seconds of delay per channel, onboard noise and sine-wave

generators, network device event logging, and user alert messaging.

JBL DrivePack input modules are used to implement crossovers, equalization, time alignment, and

protection for the attached speaker system. Speaker-dependent settings are not user-conﬁgurable

from any version of the input module. The following options are available for connectivity, audio

signal path and control functionality.

Product specificaties

Merk:	JBL
Categorie:	Speaker
Model:	VP7315

Heb je hulp nodig?

Als je hulp nodig hebt met JBL VP7315 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Speaker JBL

JBL SCL-5 Handleiding

9 April 2024

JBL SCL-6 Handleiding

9 April 2024

JBL Control 321C Handleiding

22 Maart 2024

JBL Control 322C Handleiding

22 Maart 2024

JBL Control 321CT Handleiding

22 Maart 2024

JBL PartyBox On-the-Go Essential Handleiding

19 Maart 2024

JBL PartyBox Club 120 Handleiding

19 Maart 2024

JBL L82 Classic Handleiding

19 Maart 2024

JBL Stage XD-5 Handleiding

19 Maart 2024

JBL L42ms Handleiding

6 Maart 2024

Handleiding Speaker

Nieuwste handleidingen voor Speaker

OTTO Bluetooth Revo NC2 Handleiding

20 April 2024

REL Acoustics Strata Handleiding

20 April 2024

REL Acoustics Strata III Handleiding

20 April 2024

Soen Transit Handleiding

18 April 2024

Miller & Kreisel MP300RC Handleiding

18 April 2024

Soen Transit XS Handleiding

18 April 2024

Miller & Kreisel MP7 Handleiding

18 April 2024

Qian QRBT1801 Handleiding

17 April 2024

Focal Twin6 Handleiding

17 April 2024

Kenwood KFC-WPS1000F Handleiding

16 April 2024