JBL VP7212/95DPC Handleiding

JBL Speaker VP7212/95DPC

Lees hieronder de 📖 handleiding in het Nederlandse voor JBL VP7212/95DPC (4 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
Key Features:
Powered bi-amplified full-range
loudspeaker with JBL DrivePack®
technology for portable or installed
use
2200 watts peak output power,
1100 watts continuous
12-inch Differential Drive®
low-frequency driver for extended
low-frequency output
90° x 50° coverage
Stylized and ergonomically designed
powder-coated die cast aluminum
handles
Six 3-inch fly track suspension points
and fourteen M10 fittings (optional
detachable flying fittings and forged
eye bolt kits available)
Optional DPDA digital audio input
modules available for HiQnet™
network control
Applications:
High-impact audio/visual
presentations
Theatrical sound design
Houses of Worship
Sound reinforcement rental companies
Live performance venues
Performing arts centers
Corporate learning centers
Themed entertainment venues
The VP7212/95DP is a powered
12" 2-way integrated loudspeaker
system featuring 2200 watts of peak
output power, 1100 watts continuous,
and onboard digital signal processing.
Designed in cooperation with Crown
International, the JBL DrivePack®
DP-2 features leading-edge
technology such as patented high
efficiency Class-I power amplifier
technology. Network control and
monitoring is optionally available via
System Architect software.
VP7212/95DP transducers are JBL’s
2262G 12" diameter Differential
Drive®woofer and the JBL 2452H-SL
large format 1.5" exit compression
driver. The high frequency driver is
coupled to a JBL PT-H95HF
Progressive Transition (PT)
Waveguide for excellent 90° x 50°
pattern control, smooth frequency
response, and low distortion. Easily
rotated for horizontal or vertical
system orientation.
Specifications:
Frequency Response (+/-3 dB): 63 Hz - 18 kHz
Frequency Range (-10 dB): 47 Hz - 20 kHz
Coverage Pattern: 90° x 50° rotatable waveguide
Directivity Factor (Q): 12.6
Directivity Index (DI): 11 dB
Maximum Peak Output1: 136 dB SPL 1m
Transducer Section:
Low Frequency Section: JBL 2262G, 304 mm (12 in) dia.,76 mm (3 in) Dual Coil
neodymium Differential Drive®, Direct Cooled
Bandpass Nominal Impedance: 4 ohms
High Frequency: JBL2452H-SL, 100mm (4 in) titanium damped diaphragm,
1.5 in. exit.
Bandpass Nominal Impedance: 8 ohms
System:
DP2 Internal Amplification Output
(at nominal load) 2200 Watts Peak, 1100 Watts Continuous
DP2 Output (Continuous IEC shaped pink
noise into rated load impedance): 750LF/350HF Watts
DP2 Output Section: 2-Channel, Class I
Audio Input connector XLR with loop-through
Network control connector Ethernet, RJ45 (DPDA options)
Signal Processing: DSP based, resident in Input Module. See page 2 For
input module specifications.
System Management: DSP based limiters for mechanical and thermal
protection
AC Power Operating Range: Auto Select 90-132VAC/216-264VAC, 50/60 Hz
AC Line Voltage: 50/60 Hz, Auto-Detect; 120V/240V (-15%, +10%)
AC Input Connector: Neutrik PowerCon (NAC 3MPA)
AC Loop-thru: Neutrik PowerCon (NAC 3MPB)
AC Current Requirement: 6A per system at 120V, 3A per system at 240V
Enclosure:
Box Construction: 5/8 in. multi-ply exterior grade Baltic birch. Internally
braced. Black DuraFlex™ finish.
Suspension System: 6 standard air-cargo 3 in. track and 14 M10 fittings.
Grille: 14 Gauge Black powder-coated perforated steel with
foam backing.
Dimensions (H x W x D): 701.8 x 383.8 x 523.5 mm
27.63 x 15.11 x 20.61 in.
Net Weight: 35.4 kg (78 lbs.)
1Measured with IEC shaped noise in free field conditions.
Powered 12"
2-Way Integrated
Loudspeaker System
VP7212/95DP
VP7212/95DPDA (Optional DrivePack Digital Audio Input Module)
VP7212/95DP Powered 12" 2-Way Integrated Loudspeaker System
DPDA (Optional HiQnet Network Input Module with AES Digital Audio)
The DPDA module adds AES/EBU digital audio input capability with analog audio
backup, BSS Omnidrive HD digital signal processing and LevelMax multi-stage limiting.
Its 100 Mb Ethernet networking (with daisy-chain capability), allows for Remote Control
and Monitoring via HiQnet System Architect™ software. A rotary mechanical encoder
allows for array identification and box positioning.
Available monitoring functions include: audio input type, AES lock, input signal level,
clip and gain reduction; ready / temp status; individual channel load status, signal level,
clip and gain reduction; event logging and user alert messaging. Available remote control
functions include: input type (analog or AES), input connector (XLR or Ethercon), input
level, input polarity and mute; input compressor attack/release, ratio and makeup gain;
individual channel gain and mute. Twenty, type-selectable input filters (10 System and 10
Guest filters) are available for system equalization along with user-adjustable input delay
of up to 2 seconds and sub filter access (user-adjustable low pass filter for subwoofer
systems; high pass filter for full-range systems). Signal generator functions (sine wave,
swept tone, pink or white noise) are available to facilitate system testing and up to fifty
presets can be stored internally. In addition, Master Control Panels and Master Monitor
Panels allow for convenient grouping of control and monitoring functions for multiple
DPDA equipped DrivePack enclosures, providing a powerful control/monitoring interface
for large format line array or subwoofer systems. See JBL DPDA specification sheet for
more information on DPDA input modules.
DPIP ( on-networked dbx Input Module with basic functionality)N
The standard DPIP input module features analog audio inputs and sophisticated onboard
digital signal processing technology. Precision bandpass filtering, limiting, time alignment,
component equalization and automatic self-test functions ensure optimized performance.
Rear panel controls include a 32-position detented rotary attenuator calibrated in 0.5 dB
steps, providing a 16 dB range of control. The “Enable Subwoofer Filter” button is a
momentary-contact switch that enables or disables an 80 Hz filter. For subwoofer systems,
the low-pass frequency is set to 80 Hz when selected or 100 Hz when deselected. For
full-range systems, the high-pass frequency is raised to 80 Hz when the “Enable
Subwoofer Filter” button is selected.
JBL DrivePack®enclosures are equipped with a modular input bay that accepts either DPDA or
DPIP input modules. Speaker-dependent processing such as crossover filtering and component
equalization, time alignment and protection are not user-configurable. Options are available for
connectivity, audio signal path and control functionality.
AES/Analog
AES/Analog
AES/Ethernet
AES/Ethernet
DPDA INPUT MODULE BLOCK DIAGRAM
VP7212/95DP Powered 12" 2-Way Integrated Loudspeaker System
JBL DrivePack®Software Device Panel
With HiQnet-compatible input modules installed, JBL
DrivePack systems can be remotely controlled and monitored
using HiQnet System Architect™ software. A Windows-based
application, it provides an intuitive, unified platform for system
configuration and operation of JBL DrivePack-equipped
systems, and other HiQnet compliant audio devices in the
signal chain.
HiQnet System Architect enables the unified layout of on-
screen product control surfaces, and simple preset
configuration of an entire system made up of HiQnet-
compliant products across multiple brands and product
classes. Advanced remote control and diagnostic capabilities,
custom control panel creation, unified event logging and error
reporting for the entire system, and the recall of presets on all
connected HiQnet devices are included. In addition, the
application enables a user to copy / paste like parameter
values from, and to, multiple products across the HiQnet
network. Use with current version of HiQnet System Architect
network configuration and control software, available for
download at www.harmanpro.com.
INPUT MODULE CHARACTERISTICS AND OPTIONS
Features
Description DPDA
(DrivePack Digital Audio)
HiQNet Compliant Yes
Network Communication 100MB Ethernet
Internal Switch Embedded 2 port switch
Network Connections Ethercon/RJ-45, CAT5/6
Supported Audio format AES3 Digital, Analog balanced
Level Controls Network Controllable
Remote Load Monitoring Yes
User Accessible Delays Yes
Noise Generator Pink, White, Sine
Sine Wave Generator Continuous, Burst
Error Reporting Yes, via software
Digital Speaker Setting Presets 50, user assignable
Polarity Reverse Yes, via software
Firmware upgrades via network Yes
Mute Remote via Network
Specifications
Analog Audio Input Connectors XLR, Female
Input Type Electronically Balanced, RF Filtered
Signal Loop-through XLR, male, passive pass-through
Input Impedance 20k Ohms Balanced
AES/EBU Audio Input Connectors XLR, female & Ethercon/RJ45 for CAT5 UTP Structured Wiring
Input Type Digitally Balanced
Signal Loop-through XLR, Male, 110 ohm, buffered Ethercon/RJ45 (labeled as output)
Input Impedance 110 ohms, balanced
Sampling Frequency Auto sensing, 48 KHz, 96 Khz.
Polarity (+) voltage on XLR pin 2 yields (+) LF pressure
Max Analog Input Level +26 dBu RMS / +29 dBu Peak
Max AES/EBU digital Input Level 10 V pk-pk
Frequency Response 20 Hz – 20k Hz ± 0.5 dB
DSP Processing 24 Bit conversion, 32 bit FPP
BSS Omnidrive HD with FIR filters, LevelMax Limiting
Latency Analog 675us
AES 48kHz 1.92ms
AES 96kHz 1.75ms
Dynamic Range (20-20 KHz) > 103 dB (A Weighted)
THD+N (20-20 KHz), rated power < 0.05%
User Programmable Signal Delay > 2 seconds
Input Module Controls Enable ALT Preset – Mechanical Encoder for array ID and box position
Rear Panel Indicators Cross-patch, AES Lock, Fault, Clip, Signal, Thermal, Ready, Data, Alt Preset
Select, Network link: In/Out

Product specificaties

Merk: JBL
Categorie: Speaker
Model: VP7212/95DPC

Heb je hulp nodig?

Als je hulp nodig hebt met JBL VP7212/95DPC stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Speaker JBL

JBL

JBL SCL-5 Handleiding

9 April 2024
JBL

JBL SCL-6 Handleiding

9 April 2024
JBL

JBL Control 321C Handleiding

22 Maart 2024
JBL

JBL Control 322C Handleiding

22 Maart 2024
JBL

JBL Control 321CT Handleiding

22 Maart 2024
JBL

JBL PartyBox On-the-Go Essential Handleiding

19 Maart 2024
JBL

JBL PartyBox Club 120 Handleiding

19 Maart 2024
JBL

JBL L82 Classic Handleiding

19 Maart 2024
JBL

JBL Stage XD-5 Handleiding

19 Maart 2024
JBL

JBL L42ms Handleiding

6 Maart 2024

Handleiding Speaker

Nieuwste handleidingen voor Speaker

OTTO

OTTO Bluetooth Revo NC2 Handleiding

20 April 2024
REL Acoustics

REL Acoustics Strata Handleiding

20 April 2024
REL Acoustics

REL Acoustics Strata III Handleiding

20 April 2024
Soen

Soen Transit Handleiding

18 April 2024
Miller & Kreisel

Miller & Kreisel MP300RC Handleiding

18 April 2024
Soen

Soen Transit XS Handleiding

18 April 2024
Miller & Kreisel

Miller & Kreisel MP7 Handleiding

18 April 2024
Qian

Qian QRBT1801 Handleiding

17 April 2024
Focal

Focal Twin6 Handleiding

17 April 2024
Kenwood

Kenwood KFC-WPS1000F Handleiding

16 April 2024