JBL OnBeat Rumble Handleiding

JBL Speakers OnBeat Rumble

Lees hieronder de 📖 handleiding in het Nederlandse voor JBL OnBeat Rumble (6 pagina's) in de categorie Speakers. Deze handleiding was nuttig voor 102 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

Quick Setup Guide

JBL® OnBeat RumBLe™

WeLcOme

Thank you for purchasing the JBL

® OnBeat Rumble™ speaker dock. This quick setup guide

will show you how to connect and set up your dock.

IncLuDeD ItemS

AC Cord (varies by region)

Power SupplyJBL OnBeat Rumble Speaker Dock

cOnnectIOnS

Power

Connector

Headphone

Connector

Auxiliary

Input

USB

Connector

1. If you are going to use your JBL OnBeat Rumble speaker dock with another audio

source, plug one end of a 3.5mm (1/8") stereo cable (not supplied) into the dock’s

Auxiliary Input connector, and plug the other end into the audio source’s audio-out or

headphone-out connector.

2. If you want to use headphones (such as when previewing mixes with a DJ app), plug

them into the dock’s Headphone connector.

3. Plug the dock’s power supply into the Power connector on the rear of the dock and

then into a working AC power outlet. The dock will automatically turn on and go into the

Bluetooth® pairing mode (the Source button LED will be flashing blue).

4. The USB port can be used for charging your iPod, iPhone or iPad device.

PLACEMENT

Place the JBL OnBeat Rumble speaker dock on a shelf or table with the rear of its enclosure

at least 3" (76mm) away from a wall or other surface to allow the bass ports to operate

properly.

CONTROLS AND INDICATORS

Bass Boost Button

and LED

Volume Down

Button

Volume Up

Button

Club EQ Button

and LED

Dock

Lid

Power Button

and LED

Source Button

and LED

www.jbl.com

Bass Boost button and LED: Press this button to enhance the bass performance. The

button’s LED will glow when Bass Boost is on.

Club EQ button and LED: Press this button to toggle between two EQ mode settings:

“Basic” and “Club.” The Basic setting offers a stereo perspective, while the Club setting

produces a high-energy, more focused sound. When the EQ is set to Club, the EQ LED will

glow white.

When you are using the JBL MusicFlow app, the following additional EQ settings are

available: Wider Stereo Movie, Rock Music, Jazz Music and Gaming.

Source button and LED: Press this button to cycle through the audio sources: Bluetooth,

docked device and Auxiliary Input. The Source button LED will glow to indicate the active

source: white for a docked device, blue for a paired device and amber for a Bluetooth

device connected to the Auxiliary input.

• If you begin to stream audio from a paired Bluetooth device or play audio from a device

connected to the dock while another source is playing, the dock will automatically switch

to the new source.

Power button and LED: When the dock is on, press the Power button to put it into the

standby mode. The button’s LED will glow solid amber when the unit is in standby. When

the dock is in standby, press the Power button to turn it on. The button’s LED will glow

solid white when the unit is on.

When the dock is in the standby mode, it will automatically turn on when it detects audio

playing from a -connected device or from a docked device.Bluetooth

When the dock is on, it will automatically enter the standby mode after 10 minutes of

inactivity (no audio input and no user-control operation). The button’s LED will glow amber

when the dock is in standby.

Note: When the dock enters the standby mode, it will also bring a docked device into

standby mode.

Volume Up/Down buttons: Press these buttons to raise and lower the dock’s

volume. To mute the sound, press both buttons at the same time. (The Power button LED

will flash white when the sound is muted.) To restore the sound, press either Volume button

or both buttons together.

Dock Lid: Gently press down on the front edge of the dock lid to release it and reveal the

multi-pin Lightning docking connector. To close the dock, gently push the lid back in the

enclosure until it clicks.

English

Product specificaties

Merk:	JBL
Categorie:	Speakers
Model:	OnBeat Rumble
Kleur van het product:	Zwart
Breedte:	453 mm
Diepte:	223 mm
Hoogte:	169 mm
Bluetooth:	Ja
Aan/uitschakelaar:	Ja
Type stroombron:	AC
Meegeleverde kabels:	AC
Snelstartgids:	Ja
Garantiekaart:	Ja
Indicatielampje:	Ja
Gemiddeld vermogen:	50 W
Stroomverbruik (in standby):	1 W
Volumeregeling:	Digitaal
FM-radio:	Nee
Aansluiting voor netstroomadapter:	Ja
Audio-uitgangskanalen:	- kanalen
Frequentiebereik:	50 - 18000 Hz
Signaal/ruis-verhouding:	75 dB
AUX ingang:	Ja
Apple docking-compatibiliteit:	iPad 4, iPad mini, iPhone 5, iPod Touch 5
Diameter woofer:	114 mm
Diameter hogetonenluidspreker:	64 mm
Ingebouwde lader:	Ja
Lightning-connector:	Ja
Afstandsbediening inbegrepen:	Ja
Apple Lightning dockingconnector:	Ja
Stroomverbruik (typisch):	60 W