JBL CBT1000E Handleiding

JBL Speaker CBT1000E

Lees hieronder de 📖 handleiding in het Nederlandse voor JBL CBT1000E (28 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28
CBT1000 and CBT1000E
Bracket Installation Guide
Rev C
CBT1000 CBT1000E
Hardware Included with CBT1000:
Tools Required:
M6 Hex Wrench
#2 Phillips Head Screwdriver
Note: When setting system for UP tilting, the UPPER and LOWER
parts get reversed on the cabinet -- see instructions.
M6 x 115 mm
PAN HEADS
WALL
BRACKETS
SPEAKER
BRACKETS
ARM
LINK
SWIVEL
BRACKETS
←
M6 x 125 mm
PAN HEADS
M6 x 20 mm
SOCKET HEADS
M8 x 20 mm
PAN HEADS M6
FLAT WASHERS
M6 SPLIT
LOCK WASHERS
M6 RUBBER
WASHERS
M8
FLAT WASHERS
M8 SPLIT
LOCK WASHERS
M6
CAP NUTS
4 Bracket Parts for UPPER
Mounting Position on
Cabinet (when set for 0° or
for down-tilting)
3 Bracket Parts for LOWER
Mounting Position on
Cabinet (when set for 0° or
for down-tilting)
←
Hardware Included with CBT1000E:
Tools Required:
#2 Phillips Head Screwdriver
M8 x 20 mm PAN HEADS
M8 FLAT WASHERS
M8 SPLIT LOCK WASHERS
2
Instructions for CBT 1000 Alone (without 1000E):
The BRACKET ASSEMBLY consists of 2 pieces of (the parts that mount on the SPEAKER BRACKETS
speaker), 2 pieces of WALL BRACKETS SWIVEL BRACKETS (the parts that mount on the wall), 2 pcs of
(which get added to the if utilized for horizontal swivel/pan aiming capability), and an SPEAKER BRACKETS
ARM LINK (which is utilized for the larger tilt angles).
1) RUN WIRING -- Run the wiring from the power amplier to the location desired for mounting the JBL
CBT Loudspeakers. Note: Connect wire to speaker terminals at a point in the installation process when
convenient for your installation circumstances.
2) ATTACHING WALL BRACKET TO WALL -- WALL BRACKET Using a level to ensure that the is straight,
secure the WALL BRACKET to the wall. Be sure to use the appropriate wall anchors for attaching the
bracket. Use as many of the screw holes as possible for maximum integrity and safety.
CAUTION: Installation must be done by
qualied persons using safe rigging standards.
The installer is responsible for proper selection and use of
mounting hardware to properly and safely wall-mount the
speakers.
Hardware attaching WALL BRACKET to wall is not included.
Utilize proper hardware for particular wall structure.
Spacing needed between upper and lower
WALL BRACKET parts with CBT1000 depends on
whether speaker will be set with down-tilt or up-tilt.
Spacing:
181 mm (7-1/8”) for Down-Tilt
197 mm (7-3/4”) for Up-Tilt
3
(Drawings show upper
and lower bracket
orientation as set for
down-tilt or 0°. Wall
brackets to be reversed
in location and ipped for
up-tilt applications (see
further instructions).


Product specificaties

Merk: JBL
Categorie: Speaker
Model: CBT1000E

Heb je hulp nodig?

Als je hulp nodig hebt met JBL CBT1000E stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker JBL

Handleiding Speaker

Nieuwste handleidingen voor Speaker