JAR Systems Flex-Share CSE-1615 Handleiding

JAR Systems Niet gecategoriseerd Flex-Share CSE-1615

Lees hieronder de 📖 handleiding in het Nederlandse voor JAR Systems Flex-Share CSE-1615 (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 77 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
Flex-Share Charging Station
CSE-1615
Owners Manual
Revision B
For a copy of the most up-to-date guide, please contact a
JAR Systems representative or visit:
www.JAR-Systems.com/Support
WARNINGS:
Failure to read, thoroughly understand, and follow all instructions can result in serious personal injury, damage to equipment,
or voiding of factory warranty. It is the installer’s responsibility to make sure all mounting systems are properly assembled and
installed using the instructions provided.
Failure to provide adequate structural strength for this mounting system can result in serious personal injury or damage to
equipment. It is the installer’s responsibility to make sure the structure to which this mounting system is attached can support
ïŹve times the combined weight of all equipment. Reinforce the structure as required before installing the mounting system. Any
wall to which the mount is being attached may have a maximum drywall thickness of 5/8” (1.6cm).
Exceeding the weight capacity can result in serious personal injury or damage to equipment. It is the installer’s responsibility to
make sure the combined weight of all components attached to this mount does not exceed 100 lbs.
Do not stack more than two units. Only use manufacturer supplied stacking hardware and follow instructions included with
stacking hardware for installation.
Use this mounting system only for its intended use as described in these instructions. Do not use attachments not recommended
by the manufacturer.
Never operate this mounting system if it is damaged. Contact JAR Systems for replacement or repair.
This unit must always be used by adults or with adult supervision.
Do not use this unit outdoors.
Liquids should not be stored in, set on, or placed inside this unit.
If the unit is being used or transported on an AV cart or charging cart, the unit must be secured down to the cart.
WARRANTY:
This product comes with a ïŹve-year warranty that covers any defects in material or workmanship and extends to the original
consumer of the product only. JAR Systems LLC will replace the product with a new or refurbished product, repair the product,
send replacement parts, or refund the purchase price of the product, at JAR Systems LLC’s discretion. This warranty does not cover
accidental damage, unreasonable use, neglect, tampering or other causes not arising from defects in material or workmanship.
Any implied warranties last only as long as the warranty periods listed above except where state law does not allow limitations
on how long an implied warranty lasts. This includes but is not limited to the implied warranties or merchantability and ïŹtness.
JAR Systems LLC’s responsibility is limited to the actions listed above and nothing else.
This warranty does not cover, and JAR Systems, LLC will not be responsible for, any damages due to loss of use of the product,
or any other costs or expenses incurred by you or anyone else who uses the product, whether due to defects, breach of contract,
negligence, strict liability or otherwise. JAR Systems is not liable for any indirect, special, incidental or consequential damages
related to the product or this warranty. Some states do not allow exclusions or limitations on consequential or incidental damages,
so these limitations or exclusions may not apply.
This warranty gives you speciïŹc legal rights and you may also have other rights that vary from state to state. This warranty is
governed by the laws of Florida, excluding its conïŹ‚ict of laws principles, unless your state requires that its law be used.
1. For Additional Support Call: 866.393.4202 or Email Support@JAR-Systems.com
Install the power strip in one of three possible positions with
4 screws and nuts.
Position 1: Recommended for most usage for wall
or desk installations: Power strip is positioned on the
inside of the unit with outlets facing in through the
opening in the back.
Position 2: Alternative position for desktop usage:
Power strip is positioned on the of the unit outside
with outlets facing in through the opening in the back.
Position 3: Alternative position for wall-mount usage:
Power strip is mounted to bottom side of chassis with
outlets facing upward.
2
3
1
2. For Additional Support Call: 866.393.4202 or Email Support@JAR-Systems.com
REVERSIBLE POWER STRIP
The power strip can be mounted on either the front or back side
by reversing the mounting brackets. Loosen the three screws
on each side, rotate the bracket, and replace the screws.
Position #1 Position #2
Installing the Power Strip

Product specificaties

Merk: JAR Systems
Categorie: Niet gecategoriseerd
Model: Flex-Share CSE-1615

Heb je hulp nodig?

Als je hulp nodig hebt met JAR Systems Flex-Share CSE-1615 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd JAR Systems

JAR Systems

JAR Systems Flex-Share CSE-1615 Handleiding

3 Juni 2023
JAR Systems

JAR Systems Essential CS-1210 Handleiding

26 Mei 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive

Playtive IAN 327221 Handleiding

1 Mei 2024
Samsung

Samsung UN32J4001AF Handleiding

1 Mei 2024
Bauknecht

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024
Fakir

Fakir Artemis TS 150 Handleiding

26 April 2024
Sony

Sony UTX-M03 Handleiding

26 April 2024
Sony

Sony URX-P03 Handleiding

26 April 2024
Sony

Sony WRU-806B Handleiding

26 April 2024
Sony

Sony UTX-B03 Handleiding

26 April 2024
Sony

Sony UTX-P03 Handleiding

26 April 2024
Sony

Sony ODS-L10 Handleiding

26 April 2024