Janome Quilt Maker Pro 18 Versa Handleiding

Janome Naaimachine Quilt Maker Pro 18 Versa

Lees hieronder de 📖 handleiding in het Nederlandse voor Janome Quilt Maker Pro 18 Versa (58 pagina's) in de categorie Naaimachine. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/58
Janome
Quilt Maker Pro 18 VERSA
Service Manual
Page 2 Quit Maker Pro 18 VERSA
Table of Contents
About the Quilt Maker Pro 18 VERSA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
About the Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Service Manual Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
General Specicaons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Assembly Torque Specicaons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Lubricaon Specicaons..........................................................................................................................6
Secon 1: General Observaons of Front Frame Cover, Mast and Hand Wheel ....................7
Secon 2: Removal of Front Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Secon 3: Lubricaon..............................................................................................................................10
Secon 4: Securing Flats and Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Secon 5: Axial Play Check and adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Secon 6: Adjusng the Base Plate Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Secon 7: Adjusng the Motor Drive/Timing Belt Tension ....................................16
Secon 8: Adjusng the Hopping Foot Adaptor .............................................17
Secon 9: Adjusng the Presser Bar Height (Internal Adjustment) ..............................18
Secon 10: Needle Posion, Check and Adjustment...............................................................................19
Secon 11: Timing - Checking Loop Li and Needle Distance ..................................21
Secon 12: Timing- Adjusng - First Rotate the Basket Down ..................................22
Secon 13: Timing - Adjusng Loop Li and Needle Distance ..................................23
Secon 14: Adjusng Needle Height.......................................................................................................25
Secon 15: Adjustment of the Stop Finger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Secon 16: Adjusng the Needle Height with Cylinder Tool...................................................................28
Secon 17: Electronic Adjustments and Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....29
Indicaons of Speed/Needle Posion Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Indicaons of Speed/ Needle Poson Failure.................................................................................31
Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Control Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
LED Idencaon ..................................................................34
Top Tension Calibraion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Updang Machine Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Dierences Between Front and Rear Handle Bar Display Assembliies .......................35
Fuse Informaon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Burn in Note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Display Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Main Screen Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Main Screen Regulated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Tools Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Diagnosc Tests ...................................................................46
Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
System Informaon ................................................................50
Geng Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Troubleshoong . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Janome-America.com Page 3
The Quilt Maker Pro 18 VERSA ulizes high-tech
electronics and an innovave touch-pad user
interface to oer greater funconality and ease
of operaon to home quilters than ever before
conceived in the quilng industry. The Quilt Maker
Pro 18 VERSA quilng machine is a high quality
machine that incorporates very robust design features
and is very easy to service.
The Quilt Maker Pro 18 VERSA machine is constructed
About the Quilt Maker Pro 18 VERSA
About the Manual and Support
The purpose of this service manual is to help the
technician complete a repair on a machine accurately
and quickly. The manual is complete with photographs
and explanaons that we hope will aid you in your
repair eorts. In addion to the teaching aids found
herein, you will also nd all of the tools listed that are
necessary for adjustments. If you need help in locang
these tools for purchase, please contact janome-
america.com.
Janome-America’s sta is available for assistance and
advice during normal business hours. For addional
Service Manual Guidelines
Adjustments shown in the manual should only
be made if a seng deviates from the tolerance
specied in the manual.
Adjustments should be made only in the logical
sequence shown and described in the manual.
(Do not jump ahead or start in the middle of the
adjustment sequence – this may cause addional
or more serious problems than the original issue.)
Safety must be considered when working on
any machine. Safety warnings are included
throughout this manual where appropriate, but
these warnings do not address all possible safety
concerns that might confront the
service technician.
following a specic sequence of operaons, similar to
the construcon of a house. Walls cannot be erected
unl the foundaon is in place. Similarly, this service
manual has been wrien with an adjustment logic
that is driven by the construcon processes used to
create the machine. If the service technician carefully
follows the adjustment steps in the order presented,
a ne running quilng machine is possible each
and every me.
help in technical training, we refer you to janome-
america.com.
A digital copy (PDF) of this manual is available online
@ janome-america.com.
When working on or near any live electrical
assemblies, the power cable must be removed
from the machine.
We urge you to observe the cauons in
the manual.
Please note that the hand wheel must always be
turned in the direcon of normal rotaon unless
otherwise instructed. This is especially true when
making the loop-li ming and needle-height
adjustment. (Excepons are removing thread locks
or tesng belt tension. The hand wheel may be
rocked forward and reverse in these cases.)


Product specificaties

Merk: Janome
Categorie: Naaimachine
Model: Quilt Maker Pro 18 Versa

Heb je hulp nodig?

Als je hulp nodig hebt met Janome Quilt Maker Pro 18 Versa stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Naaimachine Janome

Handleiding Naaimachine

Nieuwste handleidingen voor Naaimachine