Janome Magnolia 7330 Handleiding
Janome
Naaimachine
Magnolia 7330
Bekijk gratis de handleiding van Janome Magnolia 7330 (38 pagina’s), behorend tot de categorie Naaimachine. Deze gids werd als nuttig beoordeeld door 91 mensen en kreeg gemiddeld 4.6 sterren uit 46 reviews. Heb je een vraag over Janome Magnolia 7330 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/38
Servicing Manual
Model 7330
WHAT TO DO WHEN................................................................................................. 1-3
SERVICE ACCESS (1) FACE COVER, TOP COVER .................................................. 4
SERVICE ACCESS (2) BASE, BED COVER................................................................ 5
SERVICE ACCESS (3) BELT COVER .......................................................................... 6
SERVICE ACCESS (4) FRONT COVER ...................................................................... 7
SERVICE ACCESS (5) REAR COVER......................................................................... 8
MECHANICAL ADJUSTMENT
PRESSER BAR HEIGHT AND ALIGNMENT ................................................................ 9
NEEDLE DROP POSITION ........................................................................................ 10
NEEDLE TO SHUTTLE TIMING ................................................................................. 11
NEEDLE BAR HEIGHT ............................................................................................... 12
NEEDLE CLEARANCE TO SHUTTLE ....................................................................... 13
BACKLASH (BETWEEN LOWER SHAFT GEAR AND SHUTTLE HOOK GEAR) ..... 14
FEED DOG HEIGHT ................................................................................................... 15
ZIGZAG SYNCHRONIZATION ................................................................................... 16
NEEDLE THREAD TENSION ..................................................................................... 17
STRETCH STITCH FEED BALANCE ......................................................................... 18
REPLACEMENT AND ADJUSTMENT OF THE NEEDLE THREADER PLATE ......... 19
CONNECTOR DIAGRAM ........................................................................................... 20
SELF DIAGNOSTIC TESTS ....................................................................................... 21
SELF DIAGNOSTIC SHEET .................................................................................. 22-25
REPLACING PRINTED CIRCUIT BOARD A .............................................................. 26
REPLACING SLIDE VOLUME AND PRINTED CIRCUIT BOARD F .......................... 27
REPLACING DC MOTOR AND ADJUSTING MOTOR BELT TENSION .................... 28
REPLACING THE FUSES .......................................................................................... 29
REPLACING MACHINE SOCKET (UNIT) .................................................................. 30
REPLACING THE TRANSFORMER .......................................................................... 31
REPLACING THE ZIGZAG WIDTH MOTOR .............................................................. 32
REPLACING THE FEED STITCH MOTOR ................................................................ 33
ADJUSTING BUTTONHOLE LEVER POSITION ....................................................... 34
ADJUSTING THE BOBBIN WINDER SWITCH .......................................................... 35
OILING ........................................................................................................................ 36
PARTS LIST ........................................................................................................... 37-54
TABLE OF CONTENTS
1
7330
CONDITION CAUSE HOW TO FIX REFERENCE
1. Skipping
stitches
1. Needle is not inserted properly.
2. Needle is bent or worn.
3. Incorrectly threaded.
4. Needle or thread are
inappropriate for fabric being
sewn.
5. Sewing on stretch fabric.
6. Presser foot pressure is too
weak.
7. Inappropriate needle bar height.
8. Inapppropriate needle to shuttle
timing.
9. Inappropriate needle to shuttle
clearance.
Insert the needle properly.
Change the needle.
Rethread.
Use the recommended sewing needle
and thread.
Use a #11 blue tip needle.
Adjust the presser bar level to make the
pressure stronger.
See mechanical adjustment “Needle
bar height”.
See mechanical adjustment “Needle
to shuttle timing”.
See mechanical adjustment
“Clearance between needle and hook”.
p. 12
p. 11
p. 13
2. Fabric not
moving
1. Presser foot pressure is too
weak.
2. Incorrect feed dog Height.
3. Feed dog Is in down position.
4. Thread on bottom side of fabric
is jammed up.
5. Feed dog teeth are worn.
Adjust the presser bar level to make the
pressure stronger.
See mechanical adjustment “feed
dog height”.
Raise the feed dog Level.
Make sure to bring both needle and
bobbin thread under the foot when
starting sewing.
Change the feed dog.
p. 15
WHAT TO DO WHEN
Product specificaties
| Merk: | Janome |
| Categorie: | Naaimachine |
| Model: | Magnolia 7330 |
Heb je hulp nodig?
Als je hulp nodig hebt met Janome Magnolia 7330 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Naaimachine Janome
12 Mei 2025
4 Maart 2025
24 Februari 2025
24 Februari 2025
24 Februari 2025
24 Februari 2025
21 Maart 2024
21 Maart 2024
21 Maart 2024
21 Maart 2024
Handleiding Naaimachine
- SteamMax
- Brother
- Tristar
- Sinbo
- Sinojo
- Yamato
- Primera
- Toyota
- Lifetec
- Jata
- Zippy
- Baby Lock
- Pfaff
- Mediashop
- Alfa
Nieuwste handleidingen voor Naaimachine
15 Juni 2025
23 Mei 2025
16 Mei 2025
15 Mei 2025
14 Mei 2025
14 Mei 2025
14 Mei 2025
14 Mei 2025
14 Mei 2025
14 Mei 2025