JANDY IWCSS60W Handleiding
JANDY
Controller
IWCSS60W
Bekijk gratis de handleiding van JANDY IWCSS60W (24 pagina’s), behorend tot de categorie Controller. Deze gids werd als nuttig beoordeeld door 6 mensen en kreeg gemiddeld 4.9 sterren uit 3.5 reviews. Heb je een vraag over JANDY IWCSS60W of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/24
Infinite WaterColors
™
Smart Sync
™
LED Adapter
Model: IWCSS60W
Requires Jandy AquaLink
®
RS (revision Y or later) and Infinite WaterColors
™
300W Light Controller (revision 2.46 or later) to operate
Essential installation and startup instructions are included in this manual.
Additional operation and troubleshooting information is available online
by scanning the QR code with your phone or visiting jandy.com
WARNING
FOR YOUR SAFETY – This product must be installed and serviced by a contractor who is licensed and qualified in pool
equipment by the jurisdiction in which the product will be installed where such state or local requirements exist.
Themaintainer must be a professional with sufficient experience in pool equipment installation and maintenance so that all
of the instructions in this manual can be followed exactly. Before installing this product, read and follow all warning notices
and instructions that accompany this product. Failure to follow warning notices and instructions may result in property
damage, personal injury, or death. Improper installation and/or operation may void the warranty.
Improper installation and/or operation can create unwanted electrical hazard which may cause serious injury, property
damage, or death. DO NOT MODIFY THIS EQUIPMENT.
ATTENTION INSTALLER – This manual contains important information about the installation, operation and
safe use of this product. Thisinformation should be given to the owner/operator of this equipment.
Installation and Operation Manual
Manuel d’installation et d’utilisation
Manual de instalación y operación
Page 2
ENGLISH Jandy
®
Infinite WaterColors
™
Smart Sync
™
LED Adapter | Installation & Operation Manual
FCC Regulatory Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority
to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation.
Ifthis equipment does cause harmful interference to radio or television reception which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Section 1. Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS PERTAINING
TO A RISK OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS
READ AND FOLLOW ALL INSTRUCTIONS
The Infinite WaterColors
™
Smart Sync
™
is designed
to be powered and operated with the Infinite
WaterColors
™
Light Controller. The lights will not
operate when powered from an alternate transformer.
Follow all installation and operating instructions for
the Infinite WaterColors
™
Smart Sync
™
and Light
Controller (Model: IWCLC300W).
Specifications:
• 60W LED Driver
• Rated Max Input: 5.0A @ 14 VAC
• Rated Max Output: 4.5A @12 VDC
• Controls up to 12 feet of Brilliant Wonders
™
LED
Waterfalls (each waterfall requires 5 watts per foot)
• Only use 14 VAC input power from the Jandy
Infinite WaterColors
™
Light Controller, a listed
low voltage pool/spa transformer, between pool
controls and Smart Sync.
• Must be mounted in a NEMA approved
weatherproof enclosure.
• Requires AquaLink
®
RS automation (Rev Y or later)
to operate.
Table of Contents
Section 1. Important Safety Instructions .... 2
Section 2. Installation ................................... 3
2.1 Mount the Smart Sync LED Adapter ........ 3
2.2 Attach Wiring ............................................ 3
Section 3. iAquaLink
®
App Features............ 7
3.1 Light Setup ............................................... 7
3.2 Turn Lights On/Off .................................... 7
3.3 Select Colors ............................................ 7
3.4 Adjust Brightness...................................... 7
Section 4. Additional Online Content .......... 7
Product specificaties
| Merk: | JANDY |
| Categorie: | Controller |
| Model: | IWCSS60W |
Heb je hulp nodig?
Als je hulp nodig hebt met JANDY IWCSS60W stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Controller JANDY
27 Maart 2025
Handleiding Controller
- Inovonics
- Lindy
- Synology
- Aruba
- American Audio
- SilverStone
- Venom
- Tascam
- LYYT
- JLCooper
- IVT
- AirTurn
- SIIG
- Speed-Link
- RiotPWR
Nieuwste handleidingen voor Controller
3 Juli 2025
27 Juni 2025
17 Juni 2025
10 Juni 2025
7 Juni 2025
24 Mei 2025
24 Mei 2025
24 Mei 2025
23 Mei 2025
14 Mei 2025