IZotope Tonal Balance Control 2 Handleiding

IZotope Audiosoftware Tonal Balance Control 2

Lees hieronder de 📖 handleiding in het Nederlandse voor IZotope Tonal Balance Control 2 (51 pagina's) in de categorie Audiosoftware. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/51
12/20/23, 11:52 AM
Tonal Balance Control Help - TBC 2 Help
https://s3.amazonaws.com/izotopedownloads/docs/tbc2/en/print/index.html
1/51
TBC 2 Help
Introduction
Getting your mix or master to sit just right across the frequency
spectrum is a dicult task. Tonal Balance Control was created to make
this process more achievable for everyone.
Getting Started
Table of Contents
1. Overview
2. Authorization
3. Navigating the Interface
4. Working with IPC
5. Tips
Overview
Welcome to Tonal Balance Control! If you have never used an iZotope
product or want to know more about TBC, then this is the right chapter
for you.
12/20/23, 11:52 AM Tonal Balance Control Help - TBC 2 Help
https://s3.amazonaws.com/izotopedownloads/docs/tbc2/en/print/index.html
2/51
Authorization
The rst time you open the plug-in an authorization wizard will appear.
The Authorization window allows you to:
1. Trial: Allows you to evaluate TBC over a 10 day trial period. The
trial period starts the rst time you open TBC in your DAW/NLE.
The Authorization window will display the number of days
remaining in your trial period. Click the button to exit theContinue
Authorization window.
2. : After your 10 day trial period expires, you have the option toDemo
operate TBC in Demo mode. To continue evaluating TBC in demo
mode, click the Demo button.
3. : To disable Trial or Demo mode, you must authorize theAuthorize
product with a valid serial number. You can use the following
methods to authorize TBC:
1. Online Authorization
2. Oîš©ine Authorization
3. iLok Authorization
ADDITIONAL HELP WITH LICENSING AND INSTALLATION
Visit the iZotope Support website for additional information about
licensing, authorization and installation.
support.izotope.com/hc/en-us/sections/360004410134
Navigating the Interface
The following image outlines the main areas of the Tonal Balance
Control interface:
12/20/23, 11:52 AM Tonal Balance Control Help - TBC 2 Help
https://s3.amazonaws.com/izotopedownloads/docs/tbc2/en/print/index.html
3/51
1. Target Meter View selector : Toggles the target meter view type
between Broad and Fine.
2. Target Curve selector : Displays the name of the currently selected
target curve. Click to open the target curve selection menu.
3. Custom Target Curve Menu: Includes options for creating, saving
and managing your own target curves.
4. : Opens the TBC options window.Options
5. : Opens the help documentation in your default web browser.Help
îš½. : Resets the meter calculation.Reset
7. Target Meter: Displays your track (white) against the range of
spectral variation for the selected target curve (blue). You can also
monitor Low End Crest Factor and momentarily solo frequency
bands in this view.
îš¾. : Allows you to select an IPC compatible sourceIPC Source panel
plug-in to make adjustments to from the Tonal Balance Control
plug-in window.
Working with IPC
Tonal Balance Control can connect to other iZotope plug-ins using Inter
Plug-in Communication (IPC) technology. When an IPC source plug-in is
selected you can view the selected plug-in output spectrum, adjust


Product specificaties

Merk: IZotope
Categorie: Audiosoftware
Model: Tonal Balance Control 2

Heb je hulp nodig?

Als je hulp nodig hebt met IZotope Tonal Balance Control 2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Audiosoftware IZotope

Handleiding Audiosoftware

Nieuwste handleidingen voor Audiosoftware