IPEGA PG-9150 Handleiding

Bekijk gratis de handleiding van IPEGA PG-9150 (1 pagina’s), behorend tot de categorie Spiegelreflexcamera. Deze gids werd als nuttig beoordeeld door 20 mensen en kreeg gemiddeld 4.5 sterren uit 6 reviews. Heb je een vraag over IPEGA PG-9150 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

多功能车载支架

产品说明书(PG-9150)

产品特征:

使用说明:

1. 本产品是一款多功能车载支架，大夹口设计,适用于任天堂Switch及尺寸在130-220mm范围内的手机与平板电脑。

2. 卡扣杆采用按压式设计，内置高强度弹力按压系统，收缩自如，安装便捷。

3. 360度任意旋转，三段式万向球设计，随意调节角度，舒适角度固定。

4. 伸缩杆卡头和夹子内侧都有软胶垫片保护，不会对爱车及数码设备造成损伤。

5. 汽车座位头枕两个杆内侧宽度在 12.5-14.5cm 之间的车型均适用本款车载支架。

1.请不要把本产品放在潮湿或高温地方存储；

2.不要敲击、摔打、刺穿、或试图去分解本产品，以免对产品造成不必要的损害；

3.使用本产品时请确保设备与支架已装配到位.

4.非专业人员请勿拆卸本产品,否则不在售后保修服务内;

注意事项:

Multi-function Car Mount

User manual(PG-9150)

Features:

Instructions:

1. This product is a multi-function car mount with large size stand. Application devices: Nintendo Switch / mobile phones /

tablets ( Size range from 130 - 220 mm).

2. The telescopic rod with push-in design, Built-in high-strength elastic system,easy to extend and shrink, easy to install.

3. 360 degree free rotation, three-section universal ball design, adjust the angle freely, proper angle is fixed.

4. The bottom of telescopic rod and the inside of clip are protected by soft rubber gaskets, which will not cause damage to

the car and electronics devices.

5. This car mount is suitable for cars which the car seat headrest has two poles (the width in the middle is 12.5-14.5cm).

1. Please do not store this product in wet or high-temperature place;

2. Do not knock, beat, puncture, or attempt to disassemble the product to avoid unnecessary damage to the product;

3. When using this product, please make sure that the electronics devices and car mount are assembled.

4. Non-professionals should not disassemble this product, otherwise it will not be covered in the after-sales warranty service;

Notice:

车载支架装配示意图

数码设备装配示意图

Car Mount Installation diagram

Device Installation diagram

Product specificaties