IOptron HAE18C Handleiding
Bekijk gratis de handleiding van IOptron HAE18C (6 pagina’s), behorend tot de categorie Statief. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.1 sterren uit 2 reviews. Heb je een vraag over IOptron HAE18C of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/6
1
iOptron Corp. | 1 Merrill Street | Woburn, MA01801USA | (781) 569-0200 | Toll Free (866) 399-4587 | www.iOptron.com
Quick Start Guide
HAE18C Dual AZ/EQ SWG Hybrid Mount
PACKAGE CONTENTS
1
Telescope mount HAE18C w/built-in Wi- Fi
AC adapter -240V, 12V 5A DC output (for indoor use only) –100
USB-C 2.0 cable
Hard carrying case
Oponal Go2Nova® 8411 OLED handset with control cable
Oponal external iPolar (#3339)
Oponal carbon ber tripod (#8061)
Oponal counterweight sha P-SGP-CWS and counterweight 3006- ) (# ) (# 05
ONLINE RESOURCES www.iOptron.com ( )
User’s Manual
Hand controller and mount rmware upgrades (check online for the latest version)
ASCOM drive, Commander, Commander Lite and other computer control
1
Contents and design may change from me to me without noce.
2
iOptron Corp. | 1 Merrill Street | Woburn, MA01801USA | (781) 569-0200 | Toll Free (866) 399-4587 | www.iOptron.com
1. Remove mount head from package:
2. Set Latude Range: An HAE18C has two latude
range sengs: 0~47° and 43~90°. The default seng
is 0~47° (front latude hole). You may change the
latude range based on your locaon or if an
altazimuth (AA) mode is desired. Slightly loosen
Altude Locking Knob. Use a at head screw driver to
remove the Latude Locking Pin. Adjust the mount so
that the hole on the brass latude eyebolt is aligned
to the high latude posion hole. Insert the Locking
Pin to secure it.
3. Set up tripod: An HAE18C mount uses -a 3/8” 16
threaded hole for aachment. So a camera tripod or
other tripod with a 3/8”-16 mounng post can be
used. Shown here is an iOptron carbon ber tripod
#8061/#8061A.
4. Aach mount head: Thread the mount head onto the
tripod head and secure it.
Level the mount by adjusng the tripod legs Use the .
built-in Bubble Level Indicator on the mount base or
an external leveler for this purpose.
5. Adjust latude: To adjust the latude, slightly loosen
the Altude Locking Knob. Use the Latude
Adjustment Knob to move the mount to the desired
latude by aligning the Latude Mark Line to the
Latude Scale. Tighten the Alt. Locking Knob.
6. Install telescope: An HAE18C mount accepts a Vixen
dovetail mounng plate.
Release the dovetail Saddle Locking Lever and slide
the telescope dove il plate into the saddle with Gear ta
Switch disengaged. Make sure that the arrow sign on
the saddle is poinng forward. Tighten the Saddle
Locking Lever.
3/8”-16 mounting post
Lat. Scale
Lat. Range
Locking Pin
High Latitude
Lat. Adj.
Knob
Alt. Locking
Knob
3
iOptron Corp. | 1 Merrill Street | Woburn, MA01801USA | (781) 569-0200 | Toll Free (866) 399-4587 | www.iOptron.com
The locking levers on an HAE18C mount are ratchet
ones. Pull the lever handle and turn it to the posion
that the lever is parallel to the saddle or points
towards the scope to prevent it interfering with the
DEC unit during mount GOTO and tracking.
7. Balance payload: No RA or DEC balance is needed
for an HAE18C mount. However, you may want to
adjust the telescope posion on the dovetail saddle
to close to the mass center for beer performance.
8. Install counterweight bar and CW: The mount is
designed to operate without a counterweight (CW). If
you want to use an oponal CW, the CW sha
mounng hole is 3/8”-16 threaded. Thread in a CW
shaf ( -SGP-CWS and install a 5 lbs CW (#3006-t #P )
05) .
9. Connect DC power and handset: Plug in a 12V DC
power supply to the socket on the base. DC12V IN
If you have an oponal Go2Nova
®
8411 handset, plug
it into the 6P6C handset port on the mount.
10. Mount control via a SmartPhone/Tablet: The mount
can be controlled by the iOptron Commander Lite
app for inial sengs, as well as slew, GOTO and
tracking.
Turn the mount power on. Check your SmartPhone
WIFI seng and connect to a WIFI device named
HAECser_XXXXXX.
Launch iOptron Commander Lite and tap to connect
the mount.
Now you can control the mount via your
phone/tablet.
Locking Lever
Product specificaties
| Merk: | IOptron |
| Categorie: | Statief |
| Model: | HAE18C |
Heb je hulp nodig?
Als je hulp nodig hebt met IOptron HAE18C stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Statief IOptron
15 Juni 2025
10 April 2025
29 Maart 2025
7 Februari 2025
6 November 2024
23 Augustus 2024
21 Augustus 2024
21 Augustus 2024
17 Augustus 2024
17 Augustus 2024
Handleiding Statief
- Oben
- Sirui
- Ibiza Sound
- Barska
- Royer Labs
- Dorr
- FLOWCINE
- Rollei
- Explore Scientific
- Benro
- Eurolite
- Omnitronic
- Carson
- Sachtler
- Konig & Meyer
Nieuwste handleidingen voor Statief
31 Juli 2025
31 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
29 Juli 2025
29 Juli 2025
28 Juli 2025
28 Juli 2025
28 Juli 2025