Ion Total PA Prime Handleiding
Bekijk gratis de handleiding van Ion Total PA Prime (35 pagina’s), behorend tot de categorie Speaker. Deze gids werd als nuttig beoordeeld door 58 mensen en kreeg gemiddeld 5.0 sterren uit 29.5 reviews. Heb je een vraag over Ion Total PA Prime of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/35
TOTAL PA™ PRIME
User Guide English ( 3 – 10 )
Guía del usuario Español ( 11 – 22 )
Guide d’utilisation Français ( 23 – 33 )
Appendix English ( 34 )
2
3
User Guide ( )English
Introduction
Thank you for purchasing the Total PA
™ Prime. At ION, your entertainment is as important to us as it is
to you. That’s why we design our products with one thing in mind—to make your life more fun and
more convenient.
Box Contents
Total PA™ Prime
Power Cable (5 ft. / 150 cm)
Microphone with cable (15 ft. / 450 cm)
Speaker Stand
Quickstart Guide
Support
For the latest information about this product (documentation, technical specifications, system
requirements, compatibility information, etc.) and product registration, visit ionaudio.com.
For additional product support, visit ionaudio.com/support.
Setup
1. Make sure all items listed in the Box Contents are included in the box. Look in the box under the
foam sheet for the power cable and microphone.
2. Read the Safety & Warranty Manual before using the product.
3. Study the Connection Diagram.
4. Make sure all input devices (such as microphones, CD players, or digital media players) are turned
off with their volume settings set to “zero.”
5. Connect all devices as shown in the Connection Diagram.
6. Switch everything on in the following order:
a. Audio input devices (e.g. microphones, instruments, CD players)
b. Total PA™ Prime
7. When you are finished using Total PA
™ Prime, switch everything off in the following order:
a. Total PA™ Prime
b. Audio input devices
Speaker Stand Installation
1. Extend the speaker stand tripod legs on a flat, stable surface. Fully extend the legs until the plastic
bracket is stopped by the bumps on the center pole. Insert the lower pin directly above the lower
adjustment knob and tighten the lower adjustment knob.
2. Raise the mounting pole up to the appropriate height needed and tighten the side adjustment knob.
When raising the mounting pole, make sure the end with the upward pointing arrow is on the top.
3. Insert the upper pin into the upper pin-hole so the mounting pole stays at your set height, and
tighten the side adjustment knob.
4. On Total PA™ Prime, adjust the bottom knob counter-clockwise so the screw is not blocking the
opening.
5. Line up the Total PA
™ Prime mounting hole with the speaker stand pole and place on the pole.
6. Tighten the mounting knob clockwise on Total PA
™ Prime.
Note: Remove Total PA™ Prime prior to moving the stand for maximum safety.
Product specificaties
| Merk: | Ion |
| Categorie: | Speaker |
| Model: | Total PA Prime |
Heb je hulp nodig?
Als je hulp nodig hebt met Ion Total PA Prime stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Speaker Ion
25 Februari 2025
25 Februari 2025
25 Februari 2025
2 November 2024
6 September 2024
6 September 2024
5 September 2024
4 September 2024
25 Juni 2024
4 Mei 2024
Handleiding Speaker
- RetroSound
- Clatronic
- Glemm
- Aluratek
- Boomcore
- IFi Audio
- Fusion
- Hanwha
- Mr Handsfree
- Lionelo
- Craftsman
- Speaka
- Hecate
- InLine
- Bigben
Nieuwste handleidingen voor Speaker
18 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025