Ion DISCOVER GUITAR USB RF Handleiding

Ion Diversen DISCOVER GUITAR USB RF

Lees hieronder de 📖 handleiding in het Nederlandse voor Ion DISCOVER GUITAR USB RF (22 pagina's) in de categorie Diversen. Deze handleiding was nuttig voor 63 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/22
GuitarLink
AudioLink Series
1/4"-to-USB Cable
QUICKSTART GUIDE
ENGLISH ( 1 – 3 )
GUÍA DE INICIO RÁPIDO
ESPAÑOL ( 4 – 6 )
GUIDE D’UTILISATION RAPIDE
FRANÇAIS ( 7 – 9 )
GUIDA RAPIDA
ITALIANO ( 10 – 12 )
KURZANLEITUNG
DEUTSCH ( 13 – 15 )
SNELSTARTGIDS
NEDERLANDS ( 16 – 18 )
1
CONNECTING THE GUITARLINK
Alesis GuitarLink is a plug-and-play device, which means that there
are no drivers to install. The first time you connect it to your
computer, it will automatically install all the necessary driver
components and be ready to use.
ABOUT AUDIO LATENCY
“Latency” is the time it takes for your computer’s soundcard to process incoming data and output a sound.
The lower your latency is, the faster your computer will respond to commands and output sound.
If you experience significant delay between the time you play and the time that the computer outputs audio,
we recommend going into your software’s “Preferences” settings to make sure that your soundcard’s
latency (or buffer) is set to a low number – ideally lower than 15-20ms.
If you still experience too much latency after adjusting your software latency settings, download the free
ASIO4ALL (Audio Stream Input/Output) driver for PC at www.asio4all.com. ASIO drivers generally
perform better and with lower latency since they create a more efficient communication between audio
devices and software.
AUDIO SETUP
In most cases (especially if you are using Windows) GuitarLink will be automatically selected as your
computer’s default recording device. If you find you are unable to record any audio with GuitarLink, follow
the instructions below for your operating system.
You can use GuitarLink with any digital audio workstation or recording software that supports USB audio
devices. Be sure your audio software program is set up to receive audio via GuitarLink. This can usually
be done in your software’s “Preferences” or “Device Setup.” Please consult your software manual for more
information.
WINDOWS 7
1. Go to Start Menu f Control Panel f Hardware and Sound f Sound.
2. Select the “Recording” tab.
3. Make sure Microphone – C-Media USB Audio Device is set as the default device, then click “OK.”
SYSTEM REQUIREMENTS:
y PC: Windows XP, Vista or 7
y Mac: OS 9 or higher
y USB Port


Product specificaties

Merk: Ion
Categorie: Diversen
Model: DISCOVER GUITAR USB RF

Heb je hulp nodig?

Als je hulp nodig hebt met Ion DISCOVER GUITAR USB RF stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Diversen Ion

Handleiding Diversen

Nieuwste handleidingen voor Diversen