Intellinet 508254 Handleiding
Intellinet
Niet gecategoriseerd
508254
Bekijk gratis de handleiding van Intellinet 508254 (16 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 29 mensen en kreeg gemiddeld 4.7 sterren uit 15 reviews. Heb je een vraag over Intellinet 508254 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/16
Important: Read before use. • Importante: Leer antes de usar.
intellinetnetwork.com
4-Port Gigabit Ethernet PoE+
Industrial Switch with 2 SFP
Ports Instructions
Model 508254 (IIS-4G02POE)
2
The Intellinet 4-Port Gigabit Ethernet PoE+ Industrial Switch with 2 SFP Ports offers
an array of time-saving, cost-effective features while providing superior network
throughput. No configuration is required and installation is plug and play.
For specifications, visit intelllinetnetwork.com/barcode/508254.
Features
• Provides power and data connections for up to four PoE network devices
• IP40 slim-type metal housing to withstand harsh industrial conditions
• Wide operating temperature: -40 – 75°C (-40 – 167°F)
• Option for DIN-rail installation
• Two small form-factor pluggable GBIC module slots (SFP)
• Two redundant DC inputs (44 – 57 V) with I/O terminal block
With a backplane speed of 12 Gbps, plenty of performance is available for your
computers, servers and other networking devices. Each of the ports automatically
senses the link speed of the connected network device and adjusts to 10, 100
or 1000 Mbps for compatibility and maximum performance. This PoE switch is
designed to provide compatible devices with enough power when needed. It offers
up to 30 watts of power per port until its power budget of 120 watts is reached.
Front Panel
LED Color Status Status Description
PWR Green On Power on
Off Power off
Link/Act
1 – 4 /
SFP
1 & 2
Green
On Valid port connection
Blinking Sending or receiving data
Off No link established
PoE Orange On The connected device
is receiving power
Off No PSE/PoE device is linked
English
Instructions 4-Port Gigabit Ethernet PoE+ Industrial Switch with 2 SFP Ports
3
Power
Terminal Block Installation
NOTE: Ensure all power is off/disconnected before beginning!
1 Loosen appropriate screws.
2 Insert bare power-supply wires into appropriate terminal slots (positive
wire into positive slot; negative wire into negative slot).
3 Tighten appropriate screws to secure wires. (If desired,
repeat steps 1 – 3 on second input pair.)
4 Install block into the device and tighten screws.
Placement
Desktop Installation
Prior to use, place/position the switch:
• on a level surface with at least 25 mm (approx. 1”) of clearance for ventilation
• away from sources of electrical noise: radios, transmitters, broadband amplifiers
within 100 m (approx. 328’) of network devices it’s to be connected to.
DIN-Rail Installation
1 With DIN-rail bracket attached to device with screws, angle bracket onto DIN rail.
2 Push device in till it clicks into place.
1 2 3 4
1 2
Instructions
English
4-Port Gigabit Ethernet PoE+ Industrial Switch with 2 SFP Ports
Product specificaties
| Merk: | Intellinet |
| Categorie: | Niet gecategoriseerd |
| Model: | 508254 |
Heb je hulp nodig?
Als je hulp nodig hebt met Intellinet 508254 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Intellinet
6 Juni 2025
6 Juni 2025
5 Juni 2025
4 Juni 2025
4 Juni 2025
3 Juni 2025
3 Juni 2025
3 Juni 2025
3 Juni 2025
3 Juni 2025
Handleiding Niet gecategoriseerd
- Be Quiet!
- Moog
- Nesco
- Vaude
- Platypus
- ETON
- CYP
- Rock N Roller
- Ag Neovo
- Lamax
- Cooler Master
- GW Instek
- Fulltone
- Aquapur
- PowerXL
Nieuwste handleidingen voor Niet gecategoriseerd
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025