Intellinet 167062 Handleiding

Intellinet Niet gecategoriseerd 167062

Lees hieronder de 📖 handleiding in het Nederlandse voor Intellinet 167062 (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1

Are you completely satisﬁed with this product?

Please contact your

INTELLINET NETWORK SOLUTIONS™

dealer with comments or questions.

SOLUTIONS

All products mentioned are trademarks or registered trademarks

of their respective owners.

www.intellinet-network.com

TWIST-ON

KEYSTONE

JACK, Cat6

QUICK

START

GUIDE

INT-KJTO-QSG-1206-01

Thank you for your purchase of this

INTELLINET NETWORK SOLUTIONS™

Cat6 Twist-On Keystone Jack.

Follow the steps on this quick start guide for

easy installation and use of both the fully

shielded twisted pair (FTP) and the unshielded

twisted pair (UTP) versions of this product, both

of which can be installed without the need for

a punch-down tool.

1. Strip away approx. 30 mm of the

cable jacket. Separate the wires

into four pairs while isolating the

ground wire.

2. Place the threaded metal collet on the cable.

Referring to the color-code chart at left, insert

the wires into their corresponding wire slots on

the cap. Pull the grounding wire back toward

the collet as the cable is inserted in the cap.

3. Connect the cap with the IDC

base, using the guidepost for

proper alignment.

4. Sliding it over the

grounding wire,

position the collet over

the cap and screw it

onto the IDC base.

Tighten the collet by

hand, making sure the

grounding wire

protrudes from the back

of the collet as shown

at left-bottom.

NOTE: The optional tightening tool (included in

50-pc. cartons) can be used as shown.

5. Run the grounding wire through the cable holder on the collet. Insert the cable tie through

the cable holder, then around the cable and the grounding wire. Lightly tighten the cable tie

to secure the cable and complete the installation.

Pin number

and color

references

T568A

PIN 5 WHITE/BLUE

P 4 BIN LUE

P 1 WIN HITE/GREEN

P 2 GIN REEN

P 3 WIN HITE/ORANGE

P 6 OIN RANGE

P 7 WIN HITE/BROWN

P 8 BIN ROWN

T568B

PIN 5 WHITE/BLUE

P 4 BIN LUE

P 1 WIN HITE/ORANGE

P 2 OIN RANGE

P 3 WIN HITE/GREEN

P 6 GIN REEN

P 7 WIN HITE/BROWN

P 8 BIN ROWN

approx. 30 mm

collet cap

IDC base

cap

Product specificaties

Merk:	Intellinet
Categorie:	Niet gecategoriseerd
Model:	167062
Kleur van het product:	Wit
Gewicht:	30 g
Certificering:	EIA/TIA\nUL
Aantal per verpakking:	1 stuk(s)
Constructietype:	Plat
Contact geleider materiaal:	Nikkel
Bedrijfstemperatuur (T-T):	-40 - 80 °C
Code geharmoniseerd systeem (HS):	85369010
AWG draad omvang:	22/26
Aansluiting 1:	RJ-45
Aansluiting 1 type:	Vrouwelijk
Ondersteundende kabel types:	Cat6
Kabelafscherming:	U/UTP (UTP)