Intact Battery Guard GL10 Handleiding
Intact
Meetapparatuur
Battery Guard GL10
Bekijk gratis de handleiding van Intact Battery Guard GL10 (8 pagina’s), behorend tot de categorie Meetapparatuur. Deze gids werd als nuttig beoordeeld door 33 mensen en kreeg gemiddeld 4.8 sterren uit 17 reviews. Heb je een vraag over Intact Battery Guard GL10 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/8
USER MANUAL
EN
2
Table of contents
1.0 Information about the product page 4 ..................................................
2.0 Safety instructions page 4 ..........................................................................
3.0 Installation instruction page 4 .................................................................
4.0 App installation page 5 ................................................................................
4.1 Bluetooth radius page 5 ..............................................................................
4.2 App operation page 6 ....................................................................................
4.3 Cranking Test ..................................................................................... page 10
4.4 Load test page 11 ..............................................................................................
4.5 Overview of the trips page 13 ......................................................................
4.6 Settings page 14 ................................................................................................
5.0 Further notes page 15 .....................................................................................
4
Average power
consumption
0,534 mA (Bluetooth not connected)
1,7 mA (Bluetooth connected)
Input voltage 6~19V
Operating temperature -30 bis +80 °C (-22 bis +176 °F)
Dimensions 63*45*13mm (L*B*H)
Measurement accuracy ±0.03V
Short circuit protection Built-in
Reverse Polarity Protection Built-in
Bluetooth-Version 5.3
Bluetooth Name Battery Guard
App Name intAct Battery-Check
2.0 Safety instructions
The product housing and cables are made of fireproof materials and are suitable for high
temperatures. There is a built-in safety switch to prevent short-circuits, which automatically
switches off the device as soon as the current is too strong. Also, reverse polarity protection is
built in, so in case of reverse polarity, there will be no damage to the battery, vehicle or device.
1.0 Information about the product
3.0 Installation instruction
1.
Attach the red connector to the positive
terminal and the black connector to the
negative terminal and tighten the screws.
2. Attach the device to the battery housing
with the supplied double-sided adhesive
tape. Clean the surface before taping..
4.0 App Installation
Product specificaties
| Merk: | Intact |
| Categorie: | Meetapparatuur |
| Model: | Battery Guard GL10 |
Heb je hulp nodig?
Als je hulp nodig hebt met Intact Battery Guard GL10 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Meetapparatuur Intact
14 December 2024
Handleiding Meetapparatuur
- TFA
- Topex
- IFM
- Continental Edison
- Testec
- Kübler
- Arya
- Cliff
- Kyoritsu
- Hama
- Laserliner
- Grundfos
- Silverline
- Panasonic
- Oscium
Nieuwste handleidingen voor Meetapparatuur
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
12 Juni 2025
11 Juni 2025
11 Juni 2025