Insignia NS-S6CCBK2 Handleiding

Bekijk gratis de handleiding van Insignia NS-S6CCBK2 (2 pagina’s), behorend tot de categorie Papiervernietiger. Deze gids werd als nuttig beoordeeld door 19 mensen en kreeg gemiddeld 4.6 sterren uit 8 reviews. Heb je een vraag over Insignia NS-S6CCBK2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

SETTING UP YOUR SHREDDER

1Place the wastebasket upright on a level surface.

2Attach the shredder head to the basket. Make sure that it

ts correctly.

Note: Do not use plastic bags to line the wastebasket.

3Connect the power cord to a power outlet. Do not use an

extension cord.

USING YOUR SHREDDER

1Slide the power switch to AUTO.

2Insert paper (up to six pages) or one credit card into the

shredding slot. Your shredder automatically shreds what

you insert.

Note: Don’t put envelopes, adhesive material, newsprint,

transparencies, laminated documents, continuous forms,

cardboard, or hard and plastic materials (except credit cards)

through the shredder. You can shred small staples and small

paper clips, if they are attached to the paper you are shredding.

3If the shredder jams, slide the switch to REV to return the

paper, then slide the switch to AUTO. The shredder can be

used again when the jam is cleared.

4When the wastebasket is 2/3 full, slide the switch to OFF,

unplug the cord from the power outlet, then lift o the

shredder head and empty the wastebasket.

PACKAGE CONTENTS

• Cross cut shredder with wastebasket

• Quick Setup Guide

FEATURES

• Shreds up to six sheets of paper at one time

• Destroys credit cards, small staples, and small paper clips

• Cross-cut size .2 × 1.3 in. (5 × 34 mm) protects sensitive data

• 3.2 gal. (12 l) capacity wastebasket holds shredded waste and

is easy to empty

Before using your new product, please read these instructions to prevent any damage.

QUICK SETUP GUIDE

6-Sheet Cross

Cut Shredder

NS-S6CCBK2 / NS-S6CCBK2-C

Final at size (W×H): 12 × 9.25 in. (304.8 × 234.95 mm)

Final folded size (W×H): 4 × 9.25 in. (101.6 × 234.95 mm)

AUTO

REV

# ITEM

1 Handle

2 Shredding

slot

3 LED

indicators

4 Switch

5 Window

6 Wastebasket

DESCRIPTION

Lets you easily lift up the shredder head

to empty the paper inside the

wastebasket . Make sure that your

shredder is turned o before you move it.

Insert up to six sheets of paper at a time

or one credit card at a time.

Overheat: Lights when your shredder

has overheated. When overheated, the

shredder stops shredding. After 30

minutes, the indicator turns o and the

shredder can shred again.

Power: Lights when your shredder is in

use.

FWD: Sends an item through your

shredder. The Power indicator lights

green.

Note: When you slide the power switch to

FWD, the cutters run forward continuously. To

stop the cutters, you have to move the switch

to a dierent position.

Only use FWD to make sure that the

remaining paper in the slot gets shredded or

that you want to clear the slot.

AUTO: Automatically shreds an item

when inserted into the shredding slot.

The Power indicator lights green. After

shredding, the shredding stops

automatically.

OFF: Turns o your shredder.

REV: Reverses the paper in the slot to

clear a jam or remove unshredded paper.

The power indicator light turns green

when REV is being used, similar to FWD.

Let you see how much shredded material

is in the wastebasket.

Holds the paper and credit cards that you

have shredded. Empty the basket when it

is 2/3 full.

OverheatPower

FWDREV

OFFAUTO

Switch

LED indicators

NS-S6CCBK2_-C_21-0547_QSG_V3_EN.ai16/3/202110:15:11AMNS-S6CCBK2_-C_21-0547_QSG_V3_EN.ai 1 6/3/2021 10:15:11 AM

Product specificaties