Insignia NS-RMTLG21 Handleiding

Bekijk gratis de handleiding van Insignia NS-RMTLG21 (2 pagina’s), behorend tot de categorie Afstandsbediening. Deze gids werd als nuttig beoordeeld door 10 mensen en kreeg gemiddeld 4.3 sterren uit 8 reviews. Heb je een vraag over Insignia NS-RMTLG21 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

3Point your new remote towards the

TV, then press and hold the

power button.

4 As soon as your TV turns o,

immediately release the power

button. The LED blinks twice.

Note: You have three seconds to release

the power button before your remote

sends a dierent code to your TV.

5Use the power button to turn on

your TV, then test the other buttons.

6If one or more buttons don’t work as

you expect, repeat steps 1 through 5

using the MENU or INFO button

instead of the power button.

Before using your new product, please read

these instructions to prevent any damage.

QUICK SETUP GUIDE

Replacement

Remote

For LG TVs

NS-RMTLG21

SETTING UP YOUR SOUND BAR OR AUDIO RECEIVER VOLUME CONTROL

If you have your TV connected to a soundbar or audio receiver, you can set up your new remote to control the volume

of this device.

1Hold down volume + and - buttons

together until the LED blinks twice.

2Enter the rst four-digit code for

your sound bar or audio device.

The LED should blink twice on the

last digit.

3 Test volume + and - buttons and

the (mute) button.

Note: If the volume buttons don't

work, start again at step 1 using the

next code on the list.

Turning on all devices

If you have set up your soundbar or

audio device using Simple Setup or

Audio Code Setup, you can now turn

your TV and the audio device both on

and o using a single button. Hold

down the power button for three

seconds. Your new remote turns on

both the TV and the audio device or

soundbar. If you press and release the

button, it only turns on the TV.

Simple Setup

If you have a sound bar or audio

device from one of the brands listed

above, complete the following steps:

1Turn your TV and sound bar or

audio device on, and make sure

that there is something playing

that you can hear.

2On your new remote hold down

volume + and - buttons together

until the LED blinks twice.

3Point your new remote towards

your sound bar or audio devices

and hold down the digit button

for your brand (see table to the

left).

4 As soon as your sound bar or

audio device mutes the volume,

release the digit button. The LED

blinks twice. The remote has found

the code for your soundbar or

audio device.

The volume buttons should now

control the volume of your your

sound bar or audio devices.

Audio code setup

If your sound bar or audio device is

not one of the brands listed, you can

also set up the remote to control it by

entering a four-digit code. Locate the

brand of your sound bar or audio

device in the Remote Codes List

found in the separate document.

PACKAGE CONTENTS

• Replacement Remote

• Quick Setup Guide

INSTALLING BATTERIES

Insert two AAA batteries (not included)

into the remote. Make sure that the +

and – symbols match the + and –

symbols in the battery compartment.

SETTING UP YOUR REMOTE

The Insignia remote is

pre-programmed to control most LG

TVs.

If the buttons do not work, complete

the following steps:

1Make sure that your TV is on and not

in standby mode.

2On your new remote, hold down red

and blue buttons until the power

button LED blinks twice.

DIGIT BRAND

0 Yamaha

1 Bose

2 Denon

3Samsung / JBL /

Harman / Kardon

4LG / JVC

5Marantz / Philips

6 Onkyo

7 Panasonic / Technics

8 Pioneer

9 Sony

AAA

+

AAA

+

Power

button

LED

LED

Product specificaties