Infinity FPS-1000 Handleiding
Bekijk gratis de handleiding van Infinity FPS-1000 (4 pagina’s), behorend tot de categorie Speaker. Deze gids werd als nuttig beoordeeld door 35 mensen en kreeg gemiddeld 4.3 sterren uit 18 reviews. Heb je een vraag over Infinity FPS-1000 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/4
Owner’s Manual
®
Flat-Panel Loudspeaker
FPS-1000
A
BOUT
T
HIS
P
RODUCT
...
I
MPORTANT
!
P
OSITION
W
ITHIN
A R
OOM
W
ILL
S
TRONGLY
I
NFLUENCE
P
ERFORMANCE
...
INTRODUCTION
The Innity FPS-1000 has been designed to oer the look of a custom-
designed, in-wall speaker system in an easy-to-install on-wall product.
Installation simply entails properly mounting your FPS-1000 to any at wall
surface.
Note that the FPS-1000 must be mounted using proper anchoring hardware
(not included). You should ask an installation professional for help if you’re
unsure about the safety of your mounting location.
UNPACKING THE PEAKERSS
Check your FPS-1000’s carefully. If they have been damaged in transit, report
the damage immediately by calling your dealer and/or the trucking firm that
delivered them.
POSITIONING
Since the location of the FPS-1000’s will aect performance, it is essential you
read this section very carefully prior to mounting the speakers. Should you
have any questions relating to their installation, it’s advisable that you call either
your dealer or Innity’s Customer Service Department for advice.
Positioning tips:
When possible, mount your FPS-1000’s where there is an unobstructed view of
them from your listening area.
For the best possible stereo-sound presentation, mount your FPS-1000’s on the
same wall, about 6–8 feet apart.
Position the high-frequency drivers (tweeters) as close to ear level as
possible. When this is not possible, you can improve the performance of your
FPS-1000’s by aiming the rotatable tweeters toward your main listening area.
2
◆FPS-1000 – Owner’s Manual
Figure 1.
NOTE: This
wire is at
and about 5/8" wide.
Figure 2.
HOOKUP
Your FPS-1000’s are packaged with special at speaker wire. When connecting
your FPS-1000’s with this wire, make sure to use correct polarity for the
+ and – connections. We suggest using the ribbed conductor for the positive
terminal. See Figure 1.
The at speaker wire allows you to neatly run the wire down/up the wall to
your speakers (see Figure 2). The wires can be painted to better blend in with
your decor.
M FPS-1000’OUNTING S
Your FPS-1000’s come with four keyhole mounting locations at the rear corners
of the enclosures.
NOTE: The customer is responsible for the correct selection and use of mounting
hardware (available through hardware stores) that is necessary for the safe and
proper wall mounting of the speakers.
FRONT OF FPS-1000
RIGHTLEFT
Receiver/Amplier
– L + – R +
Ribbed conductor
REAR OF FPS-1000
–+ –+
RIGHTLEFT
Receiver/Amplier
– L + – R +
Ribbed conductor
FPS-1000 – Owner’s Manual ◆
3
Product specificaties
| Merk: | Infinity |
| Categorie: | Speaker |
| Model: | FPS-1000 |
Heb je hulp nodig?
Als je hulp nodig hebt met Infinity FPS-1000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Speaker Infinity
20 Februari 2025
9 Januari 2025
16 December 2024
26 November 2024
26 November 2024
26 November 2024
26 November 2024
26 November 2024
26 November 2024
26 November 2024
Handleiding Speaker
- Stabo
- Majority
- Audyssey
- Denon
- IPort
- Energy Sistem
- Taga Harmony
- DAS Audio
- Boynq
- DeWalt
- Audio-Technica
- Savio
- Koolatron
- Marantz
- Innovative Technology
Nieuwste handleidingen voor Speaker
18 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025