Infasecure Matilda A35 Handleiding

Infasecure Niet gecategoriseerd Matilda A35

Lees hieronder de 📖 handleiding in het Nederlandse voor Infasecure Matilda A35 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 128 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
Matilda
bed guard
INSTRUCTIONS
MODEL# A35
IMPORTANT: Please read instructions carefully.
Keep these instructions for future reference. Read the
entire instruction booklet before assembling and installing
this product. If you sell or give away this product, make
sure you give this instruction booklet to the new owner
P.O. Box 487, Emu Plains NSW 2750
Service No: 02 4728 8090
WARNING
1. For use with children from18 months to 5 years of age. This bed rail is to be used only when the child is able
to climb in and out of bed unaided.
2. This bed rail does not ensure the same level of safety as a child's cot.
3. Only use mattresses with the following measurements: minimum size 90x190cm ,maximum size 155x190cm
and min. thickness 10cm and max. 20cm.
4. Do not use when the height of the bedding is greater than 60cm. Never use on a bunk bed or any other bed
that does not correspond to the instructions.
5. To avoid risk of injury, carefully proceed acording to the instructions when assembling, installing and
using this bed rail.
6. It should be checked periodically that the bed rail is always properly fitted and secure in place, and the
locking mechanisms on the bed rail are securely fixed.
This bed guard complies with BS7972: 2001 + A1: 2009
OPERATING INSTRUCTIONS
ASSEMBLY PARTS
1. Make sure no component
is missing prior to assembly.
TO ASSEMBLE
(A) Left Vertical Side Rail
(B) Right Vertical Side Rail
(C) L-Shaped Top Rail
(D) L-Shaped Top Rail
(E) Right L-Shaped Foot Rail
(F) Left L-Shaped Foot Rail
(G) Straight Bottom Rail
(H) Straight Bottom Rail
(with sleeve)
(I) Fabric/Mesh Panel
(J) Safety Belts & Anchors
6.1
3 4
Lock button
Lock button hole 5
(E) (J)
(F)
(I)
(B)
(C)(D)
(G)(H)
(A)
2. Depress the lock buttons and
connect the Vertical Side Rails (A) &
(B), to L-shaped Top Rails (C) & (D).
3. Slide the mesh panel (I) onto
top rail as shown. Gather the
mesh fabric until the top rail end
is uncovered.
4. Connect the top two rails (C) and
(D) by aligning the two straight ends.
Depress the lock button, move and
turn the two top rails by alligning the
two straight rails into place.
5. Pull and ease the mesh panel to
cover the bed rail smoothly and flatly.
6.1 Insert the L-shaped foot rail (E)
into the fabric sleeve, as shown,
depress the two lock buttons, and
connect with Vertical Right Side Rail
(A). The locking buttons will automat-
ically spring outwards with a ‘click’
when correctly seated into the
receiving socket [6.1].
6.2 Repeat the same operation to
connect the opposite side foot rail (F)
through the mesh sleeve, and into the
Left Vertical Rail (B) [6.2]. Connect-
ing plastic parts need to be in the
same direction.
6.2
To prevent the risk of strangulation it is essential to ensure that when the bedguard is fitted into position, there
is a gap of at least 250mm (10 in.), between each end of the bed and the corresponding end of the bedguard.
The bed rail must be securely against the side of mattress with the fixings all in place.
Once fitted in place, the bedguard should be checked to ensure that it is properly fitted and secure.
Top edge of bed rail must be at least 16cm (6.3 in.) above top edge of mattress.
>16cm(6.3")
Bed rail
Footboard
>25cm(10")
Headboard
Bed rail
>25cm(10")
WARNING
Lock button
Lock button hole
9.1 Insert the joined straight bottom
rails (G/H) into the bottom of the
fabric & mesh panel, and align
the end of (G) with the receiving
plastic socket on L-shaped Foot Rail
(E), then slide into socket and ensure
that the locking button ‘clicks’ securely
into the lock button hole [9.1].
9.2 Align the end of Straight Bottom
Rail (H) with the attachment stem on
the L-shaped Foot Rail (F), and slide
the movable socket flange over the
stem, ensuring that the locking button
is securely seated into position.
TO USE
Net
L shape plate
Mattress width
WARNING
Be sure to keep lock buttons securely in place.
Children should NOT be allowed to play with the bed rail
or use it as a ladder. Discontinue use if any part of the bed rail
becomes damaged or torn.
7
Right side
Mattress
Lock button
is clicked into
Lock button hole
7. Make sure Right Vertical (A) is placed on the right side.
1. Measure the width of the bed mattress,
and adjust the length of both safety straps,
so that the distance between the
fabric/mesh cover and the L-shaped safety
anchors are approximately equal to the
mattress width (see diagram).
9.3 Your Bedguard is now fully
assembled. Please check that all
attachment locking buttons are
securely and correctly seated into
their keepers [9.3].
8. Align and connect the two bottom
rails (G) and (H) by depressing the
lock button and allowing it to ‘click’
into the lock button hole.
9.1 9.2 9.3

Product specificaties

Merk: Infasecure
Categorie: Niet gecategoriseerd
Model: Matilda A35

Heb je hulp nodig?

Als je hulp nodig hebt met Infasecure Matilda A35 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Infasecure

Infasecure

Infasecure Velocity Caprice Handleiding

24 Augustus 2023
Infasecure

Infasecure Momentum Go Handleiding

24 Augustus 2023
Infasecure

Infasecure Spectre Handleiding

24 Augustus 2023
Infasecure

Infasecure Momentum Quantum Pro Handleiding

24 Augustus 2023
Infasecure

Infasecure Momentum More Handleiding

17 Juli 2023
Infasecure

Infasecure Matilda A35 Handleiding

24 Mei 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive

Playtive IAN 327221 Handleiding

1 Mei 2024
Samsung

Samsung UN32J4001AF Handleiding

1 Mei 2024
Bauknecht

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024
Fakir

Fakir Artemis TS 150 Handleiding

26 April 2024
Sony

Sony UTX-M03 Handleiding

26 April 2024
Sony

Sony URX-P03 Handleiding

26 April 2024
Sony

Sony WRU-806B Handleiding

26 April 2024
Sony

Sony UTX-B03 Handleiding

26 April 2024
Sony

Sony UTX-P03 Handleiding

26 April 2024
Sony

Sony ODS-L10 Handleiding

26 April 2024