Indesit K3G210(X)/AUS Handleiding

Indesit Fornuis K3G210(X)/AUS

Lees hieronder de đź“– handleiding in het Nederlandse voor Indesit K3G210(X)/AUS (12 pagina's) in de categorie Fornuis. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
Contents
Installation, 2-6
Positioning and levelling
Electrical connections
Gas connection
Adapting to different types of gas
Technical data
Table of burner and nozzle specifications
Description of the appliance, 7
Overall view
Control panel
Start-up and use, 8-10
Using the hob
Using the oven
Analogue timer
Oven cooking advice table
Precautions and tips, 11
General safety
Disposal
Respecting and conserving the environment
Maintenance and care, 12
Switching the appliance off
Cleaning the appliance
Gas tap maintenance
Replacing the oven light bulb
Assistance
Operating Instructions
COOKER
AUS
English, 1
AUS
K3G210/AUS
2
AUS
! Before operating your new appliance please read
this instruction booklet carefully. It contains
important information concerning the safe installation
and operation of the appliance.
! Please keep these operating instructions for future
reference. Make sure that the instructions are kept
with the appliance if it is sold, given away or moved.
! The appliance must be installed by a qualified
professional according to the instructions provided.
! Any necessary adjustment or maintenance must be
performed after the cooker has been disconnected
from the electricity supply.
Positioning
! It is possible to install the appliance alongside
cupboards whose height does not exceed that of the
hob surface.
! This cooker should be installed directly on! This cooker should be installed directly on
! This cooker should be installed directly on! This cooker should be installed directly on! This cooker should be installed directly on
the floor. Do not install this cooker on anthe floor. Do not install this cooker on an
the floor. Do not install this cooker on anthe floor. Do not install this cooker on anthe floor. Do not install this cooker on an
artificial base of any kind.artificial base of any kind.
artificial base of any kind.artificial base of any kind.
artificial base of any kind.
! Make sure that the wall in contact with the back of
the appliance is made from a non-flammable, heat-
resistant material (T 90°C).
! Important: Do not install this appliance! Important: Do not install this appliance
! Important: Do not install this appliance! Important: Do not install this appliance
! Important: Do not install this appliance
adjacent to the door or other means ofadjacent to the door or other means of
adjacent to the door or other means ofadjacent to the door or other means ofadjacent to the door or other means of
access to minimise the likelihood of personsaccess to minimise the likelihood of personsaccess to minimise the likelihood of personsaccess to minimise the likelihood of personsaccess to minimise the likelihood of persons
using the door making contact with pans onusing the door making contact with pans on
using the door making contact with pans onusing the door making contact with pans on
using the door making contact with pans on
the hob surface.the hob surface.the hob surface.the hob surface.the hob surface.
To install the appliance correctly:
• Place it in the kitchen, dining room or the bed-sit
(not in the bathroom).
• If the top of the hob is higher than the cupboards,
the appliance must be installed at least 200 mm
away from them.
• If the cooker is installed underneath a wall cabinet,
there must be a minimum distance of 420 mm
between this cabinet and the top of the hob.
This distance should be increased to 700 mm if the
wall cabinets are flammable (
see figure
).
• Do not position blinds behind the cooker or less
than 200 mm away from its sides.
• Any hoods must be installed according to the
instructions listed in the
relevant operating
manual.
• The cooker is fitted
with a safety chain that
must be attached to a
screw, secured to the
wall behind the
appliance.
! In order to prevent accidental tipping of the
appliance, for example by a child climbing onto the
top oven door, the supplied safety chain must be
installed. Ensure the chain is secured to the rear wall
of the oven as shown, and attach the chain to a screw
secured to the wall behind the appliance.
Levelling
If it is necessary to level the appliance, screw the
adjustable feet into the places provided on each
corner of the base of the cooker (
see figure
).
The legs* fit into the slots on the underside of the
base of the cooker.
Installation of the cooker
The appliance can be installed next to furniture units
which are no taller than the top of the cooker hob. The
wall in direct contact with the back panel of the cooker
must be made of non-flammable material. During
operation the back panel of the cooker could reach a
temperature of 50°C above room temperature. For
proper installation of the cooker, the following
precautions must be taken:
a )a )a )a ) a )The appliance can be placed in a kitchen, dining
room or bedsit, but not in a bathroom.
b )b )
b )b ) b )All furniture around the appliance must be placed at
least 200 mm from the top of the cooker, should the
surface of the appliance be higher than the worktop
of this furniture. Curtains should not be placed
behind the cooker or less than 200 mm away from
the sides of the appliance.
c )c )c )c ) c )Any hoods must be installed according to the
requirements in the installation manual for the
hoods themselves.
d )d )
d )d )
d )If the cooker is installed beneath a wall cabinet, the
latter must be situated at a minimum of 420 mm
above the hob. The minimum distance between the
worktop and kitchen units made of combustible
material is 700 mm (Fig. A).
e )e )e )e ) e )The wall in direct contact with the back panel of the
cooker must be made of non-flammable materials.
f )f )
f )f ) f ) The cooker is fitted with a safety chain that must be
attached to a screw, secured to the wall behind the
appliance.
! Some models can have their gas connection
inverted. It is important to make sure the safety
chain is always situated on the side which
corresponds to the screw holder (Fig. B).
Installation
AUS
3
Fig. A Fig. B
Gas connection
T he cooker should be connected to the gas-supply
by a corgi registered installer. During installation of
this product it is essential to fit an approved gas tap
to isolate the supply from the appliance for the
convenience of any subsequent removal or
servicing. Connection of the appliance to the gas
mains or liquid gas must be carried out according to
the prescribed regulation in force, and only after it is
ascertained that it is adaptable to the type of gas to
be used. If not, follow
the instructions
indicated in the
paragraph headed
“Adaptation to different
gas types”. On some
models the gas supply
can be connected on
the left or on the right,
as necessary; to
change the connection,
reverse the position of the hose holder with that of
the cap and replace the gasket (supplied with the
appliance). In the case of connection to liquid gas,
by tank, use pressure regulators that conform to the
regulation in force. The gas supply must be
connected to the left of the appliance. Be sure that
the hose does not pass through the rear of the
cooker touching hot parts.
! Make sure the supply pressure conforms with the
values shown in the table entitled “Caracteristics of
the burners and nozzles”. When the cooker isWhen the cooker isWhen the cooker isWhen the cooker isWhen the cooker is
installed between cabinets (recessed), theinstalled between cabinets (recessed), the
installed between cabinets (recessed), theinstalled between cabinets (recessed), the
installed between cabinets (recessed), the
gas connection must be effected by angas connection must be effected by angas connection must be effected by angas connection must be effected by angas connection must be effected by an
approved flexible hose with bayonet fittingapproved flexible hose with bayonet fittingapproved flexible hose with bayonet fittingapproved flexible hose with bayonet fittingapproved flexible hose with bayonet fitting
(BS 669 Current Edition). The gas inlet for(BS 669 Current Edition). The gas inlet for
(BS 669 Current Edition). The gas inlet for(BS 669 Current Edition). The gas inlet for(BS 669 Current Edition). The gas inlet for
the cookers is a threaded G 1/2 gas femalethe cookers is a threaded G 1/2 gas femalethe cookers is a threaded G 1/2 gas femalethe cookers is a threaded G 1/2 gas femalethe cookers is a threaded G 1/2 gas female
f i t t i n g .f i t t i n g .
f i t t i n g .f i t t i n g .
f i t t i n g .
* Only available in certain models
Connecting the gas supply
To make the connection, a flexible hose should be
used corresponding to the current gas regulations
which are:
• the hose must never be at any point in its lenght
in contact with the “hot” parts of the cooker;
• the hose must never be longer than 1,5 metre;
• the hose must not be subject to any tension or
torsional stress and it must not have any
excessively narrow curves or bottlenecks;
• the hose must be easy to inspect along its entire
length to check its condition;
• the hose must always be in good condition, never
attempt to repair.
! The installation must comply with gas safety
(installation and use) regulations 1984. In all cases
for the above, by low, a qualified, corgi approved
engineer must be called for installation.
Electrial connection
Power supply voltage and frequency: 230-240V a.c.
50/60 Hz.
!!
!!
! The supply cable must be positioned so that it
never reaches at any point a temperature 50°C
higher than the room temperature. The cable must
be routed away from the rear vents. Should you
require it, you may use a longer cable, however, you
must ensure that the cable supplied with the
appliance is replaced by one of the same
specifications in accordance with current standards
and legislation.
Your appliance is supplied with a 13 amp fused plug
that can be plugged into a 13 amp socket for
immediate use. Before using the appliance please
read the instructions below.
WARNING - THIS APPLIANCE MUST BE
EARTHED.
THE FOLLOWING OPERATIONS SHOULD BE
CARRIED OUT BY A QUALIFIED ELECTRICIAN.
Replacing the fuse:
When replacing a faulty fuse, a 13 amp ASTA
approved fuse to BS 1362 should always be used,
and the fuse cover re-fitted. If the fuse cover is lost,
the plug must not be used until a replacement is
obtained.
Replacement fuse covers:
If a replacement fuse cover is fitted, it must be of
the correct colour as indicated by the coloured
marking or the colour that is embossed in words on
the base of the plug. Replacements can be obtained
directly from your nearest Service Depot.
700 mm
HOT PARTS
HOOD
420
Min.
min.
650
mm. with hood
min.
700
mm. without hood
mm.
600
Min. mm.
420
Min. mm.

Product specificaties

Merk: Indesit
Categorie: Fornuis
Model: K3G210(X)/AUS

Heb je hulp nodig?

Als je hulp nodig hebt met Indesit K3G210(X)/AUS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Fornuis Indesit

Indesit

Indesit IS67V5CCB/FR Handleiding

28 Augustus 2023
Indesit

Indesit IP 04 S Handleiding

4 Juli 2023
Indesit

Indesit PAA 642 IX/I WE1 Handleiding

2 Juli 2023
Indesit

Indesit IS5E5PCW/E Handleiding

29 Juni 2023
Indesit

Indesit KG9402WG/F Handleiding

29 Juni 2023
Indesit

Indesit PIM 740 AS (IX) Handleiding

23 Juni 2023
Indesit

Indesit ID67V9HCCX Handleiding

19 Juni 2023
Indesit

Indesit VRM 641 D C Handleiding

17 Juni 2023
Indesit

Indesit K3T32S(W)/O Handleiding

15 Juni 2023
Indesit

Indesit HGM 20.B IX Handleiding

12 Juni 2023

Handleiding Fornuis

Nieuwste handleidingen voor Fornuis

AEG

AEG NCP84C01AZ Handleiding

28 April 2024
AEG

AEG TI64IB30IZ Handleiding

28 April 2024
Midea

Midea MC-HV848 Handleiding

28 April 2024
IKEA

IKEA TILLREDA 005.558.96 Handleiding

27 April 2024
IKEA

IKEA MATMĂ„SSIG 905.136.04 Handleiding

27 April 2024
IKEA

IKEA VASASTAN 405.236.05 Handleiding

27 April 2024
Bertazzoni

Bertazzoni PRO1005GGVLXE Handleiding

25 April 2024
Bertazzoni

Bertazzoni P905CAPROX Handleiding

25 April 2024
Mestic

Mestic MIC-120 Handleiding

25 April 2024
LG

LG LCE3010SBE Handleiding

18 April 2024