Indesit FIM 21 K.B IX GB Oven Handleiding

Indesit OVENS FIM 21 K.B IX GB Oven

Lees hieronder de 📖 handleiding in het Nederlandse voor Indesit FIM 21 K.B IX GB Oven (12 pagina's) in de categorie OVENS. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12

FIM 21 K.B IX GB

FIM 21 K.B GB

Contents

Installation, 2

Positioning

Electrical connections, 3

Data plate

Description of the appliance, 4

Overall view

Control panel

Start-up and use, 5

Starting the oven

Cooking modes, 6-7

Cooking modes

Practical cooking advice

Cooking advice table

Precautions and tips, 8

General safety

Disposal

Respecting and conserving the environment

Maintenance and care, 9

Switching the appliance off

Cleaning the appliance

Cleaning the oven door

Replacing the light bulb

Guarantee, 10

Assistance, 11

Operating Instructions

OVEN

English, 1

Please phone us on

08448 24 24 24

to activate your

guarantee

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

! Before placing your new appliance into operation

please read these operating instructions carefully.

They contain important information for safe use, for

installation and for care of the appliance.

! Please keep these operating instructions for future

reference. Pass them on to possible new owners of

the appliance.

Positioning

! Keep packaging material out of the reach of

children. It can become a choking or suffocation

hazard. (

see Precautions and tips

! The appliance must be installed by a qualified

person in compliance with the instructions provided.

Incorrect installation may cause harm to persons,

animals or may damage property.

Fitting the appliance

Use the appropriate cabinet to ensure that the

appliance functions properly.

• The panels adjacent to the oven must be made of

heat-resistant material.

• Cabinets with a veneer exterior must be assembled

with glues which can withstand temperatures of up

to 100°C.

• to install the oven under the counter (

see diagram

)

and in a kitchen unit, the cabinet must have the

following dimensions:

! The appliance must not come into contact with

electrical parts once it has been installed.

The consumption indications on the data plate have

been calculated for this type of installation.

Ventilation

To ensure good ventilation, the back panel of the

cabinet must be removed. It is advisable to install the

oven so that it rests on two strips of wood, or on a

completely flat surface with an opening of at least 45 x

560 mm (

see diagrams

Centring and fastening

Secure the appliance to the cabinet by opening the

oven door and putting 4 screws into the 4 holes of the

outer frame.

! All parts which ensure the safe operation of the

appliance must not be removable without the aid of a

tool.

Installation

595 mm.

24 mm.

545 mm.

5 mm.

567 mm.

23 mm.

575-585 mm.

45 mm.

560 mm.

547 mm. min.

560 mm.

45 mm.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

DATA PLATE

Dimensions

width cm 43.5

height cm 32

depth cm 43.5

Volume lt. 60

Electrical

connections

voltage: 230-240V ~ 50/60Hz

maximum power absorbed

2250W-2400W

ENERGY LABEL

Directive 2002/40/EC on the label

of electric ovens.

Standard EN 50304

This appliance conforms to the

following European Economic

Community directives:

- 2006/95/EEC of 12/12/06 (Low

Voltage) and subsequent

amendments;

- 2004/108/EEC of 15/12/04

(Electromagnetic Compatibility) and

subsequent amendments;

- 93/68/EEC of 22/07/93 and

subsequent amendments.

- 2002/96/EC and subsequent

amendments.

Energy consumption Class

certification Natural convection

heating mode: Traditional

Electrical connection

! Ovens with a three-pole power supply cable are

designed to operate with alternated current at the

supply frequency and voltage indicated on the data

plate (at the bottom of the oven dashboard). The

earthing conductor of the cable is the yellow-green

conductor.

Two types of connection are provided:Two types of connection are provided:

Two types of connection are provided:Two types of connection are provided:Two types of connection are provided:

Connection n° 1

Connecting the power supply cable to the mains.

Fit a normalized plug to the cable, which corresponds

to the load indicated on the data plate; if the cooker is

connected directly to the mains, an omnipolar circuit-

breaker with a minimum opening of 3 mm between the

contacts, suitable for the load indicated and

complying with current directives, must be installed

between the appliance and the mains (the earthing

wire must not be interrupted by the circuit-breaker).

The power supply cable must be positioned so that it

does not exceed room temperature by 50°C at any

point of its length. Before making the connection

check that:

• the circuit breakers or fuses of the home system

can support appliance load (see data plate);

• the power supply system has an efficient earthing

connection which complies with the provisions of

current regulations and the law;

• there is easy access to the socket or the omnipolar

circuit-breaker once the cooker has been installed.

! do not use reducers, adapters or shunts as these

could cause heating or burning.

Connection n° 2

Disposing of the plug.

! THIS APPLIANCE MUST BE EARTHED.THIS APPLIANCE MUST BE EARTHED.THIS APPLIANCE MUST BE EARTHED.THIS APPLIANCE MUST BE EARTHED.THIS APPLIANCE MUST BE EARTHED.

Ensure that before disposing of the plug itself, you

make the pins unusable so that it cannot be

accidentally inserted into a socket. Instructions for

connecting cable to an alternative plug:

! the wires in the mains lead are coloured in

accordance with the following code:

Green & Yellow -Earth-Earth

-Earth-Earth

-Earth

Blue -Neutral-Neutral-Neutral-Neutral-Neutral

Brown -Live-Live

-Live-Live-Live

If the colours of the wires in the mains lead do not

correspond with the coloured markings identifying the

terminals in your plug, proceed as follows.

Connect Green & Yellow wire to terminal marked “EE

E”

or 66666 or coloured Green or Green & Yellow.

Connect Brown wire to terminal marked “

LLL” or

coloured Red. Connect Blue wire to terminal marked

“NN

N” or coloured Black. If a 13 amp plug (BS 1363) is

used it must be fitted with a 13 amp fuse.

A 15 amp plug must be protected by a 15 amp fuse,

either in the plug or adaptor or at the distribution

board.If you are in any doubt about the electrical

supply to your machine, consult a qualified electrician

before use.

How to connect an alternative plug

The wires in this mains

lead are coloured in

accordance with the

following code:

BLUEBLUE

BLUEBLUEBLUE “NEUTRAL” (N)“NEUTRAL” (N)

“NEUTRAL” (N)“NEUTRAL” (N)“NEUTRAL” (N)

BROWNBROWN

BROWN “LIVE” (L)“LIVE” (L)

“LIVE” (L)“LIVE” (L)

“LIVE” (L)

GREEN AND YELLOWGREEN AND YELLOWGREEN AND YELLOWGREEN AND YELLOWGREEN AND YELLOW

“EARTH” (E)“EARTH” (E)

“EARTH” (E)“EARTH” (E)“EARTH” (E)

Disposing of the appliance

When disposing of the appliance please remove the

plug by cutting the mains cable as close as possible

to the plug body and dispose of it as described

above.

! The plug and socket must be easily accessible.The plug and socket must be easily accessible.The plug and socket must be easily accessible.The plug and socket must be easily accessible.The plug and socket must be easily accessible.

GREEN &

YELLOW

BROWN

BLUE

13 amp fuse

CROSS-BAR

CORD GRIP