Indesit EWD 91283 W EU Handleiding

Indesit Wasmachine EWD 91283 W EU

Bekijk gratis de handleiding van Indesit EWD 91283 W EU (36 pagina’s), behorend tot de categorie Wasmachine. Deze gids werd als nuttig beoordeeld door 53 mensen en kreeg gemiddeld 5.0 sterren uit 27 reviews. Heb je een vraag over Indesit EWD 91283 W EU of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/36

Contents

Installation, 2-3

Unpacking and levelling

Connecting the electricity and water supplies

The first wash cycle

Technical data

Care and maintenance, 4

Cutting off the water or electricity supply

Cleaning the washing machine

Cleaning the detergent dispenser drawer

Caring for the door and drum of your appliance

Cleaning the pump

Checking the water inlet hose

Precautions and tips, 5

General safety

Disposal

Description of the washing machine

and starting a wash cycle, 6-7

Control panel

Indicator lights

Starting a wash cycle

Wash cycles, 8

Table of wash cycles

Fast daily cycles

Personalisation, 9

Setting the temperature

Setting the spin speed

Functions

Detergents and laundry, 10

Detergent dispenser drawer

Preparing the laundry

Special wash cycles

Load balancing system

Troubleshooting, 11

Service, 12

EWD 91283

Instructions for use

WASHING MACHINE

English,1

GB ES PT

Português,25

Español,13

! This instruction manual should be kept in a safe

place for future reference. If the washing machi-

ne is sold, transferred or moved, make sure that

the instruction manual remains with the machine

so that the new owner is able to familiarise him-

self/herself with its operation and features.

! Read these instructions carefully: they con-

tain vital information relating to the safe instal-

lation and operation of the appliance.

Unpacking and levelling

Unpacking

1. Remove the washing machine from its

packaging.

2. Make sure that the washing machine has

not been damaged during the transportation

process. If it has been damaged, contact the

retailer and do not proceed any further with

the installation process.

3. Remove the 4 pro-

tective screws (used

during transportation)

and the rubber wa-

sher with the cor-

responding spacer,

located on the rear

part of the appliance

( ).see figure

4. Close off the holes using the plastic plugs

provided.

5. Keep all the parts in a safe place: you will

need them again if the washing machine ne-

eds to be moved to another location.

! Packaging materials should not be used as

toys for children.

Levelling

1. Install the washing machine on a flat sturdy

floor, without resting it up against walls, furni-

ture cabinets or anything else.

2. If the floor is not

perfectly level, com-

pensate for any une-

venness by tightening

or loosening the

adjustable front feet

( ); the angle see figure

of inclination, measu-

red in relation to the

worktop, must not

exceed 2°.

Levelling the machine correctly will provide

it with stability, help to avoid vibrations and

excessive noise and prevent it from shifting

while it is operating. If it is placed on carpet or

a rug, adjust the feet in such a way as to allow

a sufficient ventilation space underneath the

washing machine.

Connecting the electricity and

water supplies

Connecting the water inlet hose

1. Connect the sup-

ply pipe by screwing

it to a cold water tab

using a ¾ gas threa-

ded connection (see

figure).

Before performing the

connection, allow the

water to run freely un-

til it is perfectly clear.

2. Connect the inlet

hose to the washing

machine by screwing

it onto the correspon-

ding water inlet of the

appliance, which is

situated on the top

right-hand side of the

rear part of the ap-

pliance . (see figure)

3. Make sure that the hose is not folded over

or bent.

! The water pressure at the tap must fall within

the values indicated in the Technical details

table (see next page).

! If the inlet hose is not long enough, contact a

specialised shop or an authorised technician.

! Never use second-hand hoses.

! Use the ones supplied with the machine.

Installation

65 - 100 cm

Connecting the drain hose

Connect the drain

hose, without bending

it, to a drainage duct

or a wall drain located

at a height between

65 and 100 cm from

the floor;

alternatively, rest it on

the side of a washba-

sin or bathtub, faste-

ning the duct sup-

plied to the tap (see

figure). The free end

of the hose should

not be underwater.

! We advise against the use of hose exten-

sions; if it is absolutely necessary, the exten-

sion must have the same diameter as the

original hose and must not exceed 150 cm in

length.

Electrical connections

Before plugging the appliance into the electri-

city socket, make sure that:

•thesocketisearthedandcomplieswithall

applicable laws;

•thesocketisabletowithstandthemaximum

power load of the appliance as indicated in

the Technical data table (see opposite);

•thepowersupplyvoltagefallswithinthe

values indicated in the Technical data table

(see opposite);

•thesocketiscompatiblewiththeplugof

the washing machine. If this is not the case,

replace the socket or the plug.

! The washing machine must not be installed

outdoors, even in covered areas. It is extreme-

ly dangerous to leave the appliance exposed

to rain, storms and other weather conditions.

! When the washing machine has been instal-

led, the electricity socket must be within easy

reach.

! Do not use extension cords or multiple sockets.

! The cable should not be bent or compressed.

! The power supply cable must only be repla-

ced by authorised technicians.

Warning! The company shall not be held

responsible in the event that these regulations

are not respected.

The first wash cycle

Once the appliance has been installed, and

before you use it for the first time, run a wash

cycle with detergent and no laundry, using the

wash cycle .2

Technical data

Model EWD 91283

Dimensions

width 59.5 cm

height 85 cm

depth 60 cm

Capacity from 1 to 9 kg

Electrical

connections

please refer to the technical

data plate fixed to the ma-

chine

Water con-

nection

maximum pressure 1 MPa

(10 bar)

minimum pressure 0.05

MPa (0.5 bar)

drum capacity 62 litres

Spin speed up to 1200 rotations per

minute

Test wash

cycles in

accordance

with re-

gulations

1061/2010

and

1015/2010

Programme 14:

Eco Cotton 60°C.

Programme 14:

Eco Cotton 40°C.

This appliance conforms to

the following EC Directives:

- EMC 2014/30/EU (Electro-

magnetic Compatibility)

- LVD 2014/35/EU (Low

Voltage)

- 2012/19/EU (WEEE)

Product specificaties

Merk:	Indesit
Categorie:	Wasmachine
Model:	EWD 91283 W EU
Apparaatplaatsing:	Vrijstaand
Soort bediening:	Buttons,Rotary
Kleur van het product:	Wit
Deurscharnieren:	Links
Ingebouwd display:	Nee
Gewicht:	73400 g
Breedte:	595 mm
Diepte:	600 mm
Hoogte:	850 mm
Netbelasting:	1850 W
Type lader:	Voorbelading
Deurkleur:	Wit
Snoerlengte:	1.2 m
Trommelinhoud:	62 l
Uitgestelde start timer:	Nee
Resterende tijd indicatie:	Ja
Wi-Fi-besturing:	Nee
Energie-efficiëntieklasse (oud):	A+++
Energieverbruik wassen:	1.158 kWu
Wasklasse:	A
Jaarlijkse energieverbruik wassen:	216 kWu
Centrifuge-droger klasse:	B
Geluidsniveau (wassen):	49 dB
Sopschuimbewaking:	Ja
Onbalanscontrolesysteem:	Ja
Aanpasbare centrifugesnelheid:	Ja
Maximale centrifugesnelheid:	1200 RPM
Stroom:	10 A
Geluidsniveau bij centrifugeren:	75 dB
Jaarlijks waterverbruik wassen:	11690 l
Near Field Communication (NFC):	Nee
Restvochtpercentage:	53 procent
Cyclustijd (max):	250 min
Kuip materiaal:	Kunststof
Stroomverbruik (in standby):	8 W
Kijkglas:	Ja
Watertoevoer:	Koud
Stroomverbruik (indien uit):	0.5 W
Nominale capaciteit:	9 kg
AC-ingangsspanning:	220 - 240 V
AC-ingangsfrequentie:	50 Hz
Wasprogramma's:	Cold,Cotton,Quick,Synthetics