Impact RST-001 Handleiding
Pagina's 2 Engels Niet gecategoriseerd
Bekijk de handleiding van Impact RST-001 gratis online of download de PDF. 33 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag
www.impactstudiolighting.com
RST-001
Posing Stool
ASSEMBLY INSTRUCTIONS
Parts List
1 – seat cushion
1 – mounting plate
4 – 1/2˝ screws
1 – pneumatic cylinder
1 – pedestal base
5 – pedestal feet
Specications
Weight capacity: 220.5 lb. (100 kg)
Height: 20 to 30 in. (50.8 to 76.2 cm)
Base diameter: 22 in. (55.9 cm)
Seat diameter: 14 in. (35.6 cm)
Feet type: Pedestal
Material: Chrome-plated steel cylinder,
high-impact nylon
seat cushion
1/2˝ screws
mounting
plate
pneumatic
cylinder
pedestal
base
pedestal
feet
Step One
Remove all the parts from the carton and make
certain you have all the items in the parts list
above and in the correct quantity.
Step Two
Insert the pedestal feet into the pedestal base.
Be sure all feet are inserted securely.
Step Three
Insert the pneumatic cylinder into the
pedestal base.
Step Four
Attach the mounting plate to the seat
cushion using the four 1/2˝ screws.
Tighten the screws rmly.
Step Five
Push the mounting plate and the seat
cushion down onto the pneumatic cylinder
until it is secure.
To adjust the seat height, pull up on the lever and
either push down on the seat to lower or pull up
to raise the height. Make certain all screws are
tightened fully before using this stool.
Product specificaties
| Merk: | Impact |
| Categorie: | Niet gecategoriseerd |
| Model: | RST-001 |
Heb je hulp nodig?
Als je hulp nodig hebt met Impact RST-001 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Impact
Impact QuikBalance Handleiding Impact Folding Beauty Dish Handleiding Impact CC-131 Handleiding Impact LKB-5C Handleiding Impact BHE-118 Handleiding Impact KCP-220 Handleiding Impact KCP-240 Handleiding Impact KCP-200B Handleiding