Imarflex ICB-1500PRO Handleiding

Imarflex Blender ICB-1500PRO

Lees hieronder de 📖 handleiding in het Nederlandse voor Imarflex ICB-1500PRO (5 pagina's) in de categorie Blender. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
MODEL NO. : ICB-1500Pro
RATED VOLTAGE : 230Va.c. 60Hz
When using electrical appliances, basic safety precautions should always be followed,
including the following:
1. Read all instructions carefully.
2. Before using the unit, check if the voltage indicated corresponds with the
convenience outlet (230Va.c.).
3. Do not use two-way socket with other appliance.
4. Do not use any appliance with a damaged cord or plug. If the cord is damaged, it
should be replaced with the same type and size or bring the unit to the nearest
Imarex Authorized Service Center.
5. Do not place the unit near gas stove, electric stove or in a heated oven.
6. Put the unit on at surfaced; keep it away from the edge of counter to avoid
7. Children should be supervised to ensure that they do not play with the appliance.
8. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliances by a person responsible for their safety.
9. To protect against electric shock, do not immerse the base in water.
10. Blade is sharp, handle it carefully.
11. Do not put the blade assembly on the base without the plastic jar.
12. Do not use the blender if the plastic jar has a crack.
13. Do not use the unit for outdoor use.
14. Do not use this unit other than its intended use.
15. Save this instruction manual for future reference.
Motor Base
Rubber Foot
Jar Socket
Control Panel
Blade Assembly
Plastic Jar
Center Lid/Measuring Cup
IMPORTANT: Your blender jar and blades are subject to wear during normal use. Always
inspect the jar for nicks, chips or cracks. Always inspect blades for broken, bent or loose
blades. Avoid using the r or blades damaged ja if .
Contact the Imarex Authorized Service Center to obtain evaluation and repair.
Make sure that the blender is unplugged. Place blender base on clean, dry surface to
keep foreign particles from being pulled up into motor during operation.
1. Place the Plastic Jar with Blade Assembly on the Motor Base and press down until
securely engaged.
2. Put the Center Lid on the Lid.
3. Secure the Lid into the Plastic Jar and press down.

Product specificaties

Merk: Imarflex
Categorie: Blender
Model: ICB-1500PRO

Heb je hulp nodig?

Als je hulp nodig hebt met Imarflex ICB-1500PRO stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Handleiding Blender Imarflex

Handleiding Blender

Nieuwste handleidingen voor Blender