IGS Audio Rubber Bands Handleiding

IGS Audio Effect machine Rubber Bands

Lees hieronder de 📖 handleiding in het Nederlandse voor IGS Audio Rubber Bands (8 pagina's) in de categorie Effect machine. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
RUBBER BANDS
USER'S MANUAL
IGS Audio Igor Sobczyk
3 Maja 76d, 41-400 Mysłowice, Poland
e-mail: igs@o2.pl ph: +48 601 597 592
www.igsaudio.com
Please read all of the following instructions and save them
for later reference before attempting to connect the unit to the mains.
EARTH
This unit is connected via its power cord to the mains safety earth.
NEVER OPERATE THE UNIT WITH THIS EARTH CONNECTION REMOVED.
COVERS
DO NOT remove the covers. Refer servicing to qualified personnel only.
VOLTAGE
Unit is set to operate only at the voltage indicated on the PSU unit
CHECK that the correct voltage is selected before connecting the AC mains supply.
FUSES
CHECK that the fuse fitted is the correct type for the local mains voltage.
ALWAYS replace fuse with the correct type.
MOISTURE
DO NOT expose the unit to rain or moisture. If the unit
should become so exposed REMOVE the mains power immediately.
CABLES
PROTECT the mains power cord from damage though impact or abrasion.
HEAT
ALWAYS site the unit away from sources of heat including direct sunlight and ensure
adequate ventilation around the unit.
Copyright 2014. All rights reserved.
The information in this document is subject to change without notice.
IGS Audio makes no warranty of any kind with respect to the material in this document
and shall not be liable for errors contained herein or for incidental or consequential
damages related to the use of the material.
Manual revision: 1.0 (December 2014)
Thank you for buying this IGS Audio product.
Please read the information provided below very carefully before using your IGS unit.
Unpacking
Your RUBBER BANDS has been carefully and meticulously tested and inspected before
dispatch. Please check for any signs of transit damage. If any signs of mishandling are found
please notify the carrier and your dealer immediately.
Your RUBBER BANDS packing should contain an RUBBER BANDS with IGS Audio tag, an
RUBBER BANDS POWER SUPPLY unit and this manual with the Warranty and
RoHS/CE/WEEE Declaration attached.
Compatibility and Power
The RUBBER BANDS uses dedicated external POWER SUPPLY unit and can't operate without
it.
Never attempt to replace the external PSU with the third party one or one made by yourself.
There is a fuse socket near the power cable connector on the PSU. Ensure that the correct fuse
is being used before plugging the TUBECORE to the power outlet.
➔For US area (115V) use 2A Slow Blow (Type T).
➔For Europe and rest of the world area (230V) use 1A Slow Blow (Type T).
Always check the voltage selector on the PSU to ensure that it is set to the proper voltage
available in your country.
Connecting the PSU to the RUBBER BANDS is fairly easy, thanks to industrial standard 7-pin
metal connector and long, heavy duty cable.
Always power up the PSU first and then use power switch at the front of the RUBBER
BANDS. Follow the reverse order when switching off.


Product specificaties

Merk: IGS Audio
Categorie: Effect machine
Model: Rubber Bands

Heb je hulp nodig?

Als je hulp nodig hebt met IGS Audio Rubber Bands stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Effect machine IGS Audio

Handleiding Effect machine

Nieuwste handleidingen voor Effect machine