IFM VSE002 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor IFM VSE002 (11 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/11
Operating instructions
Diagnostic electronics
for vibration sensors
VSE002
80272365/00 03/2020
UK
2
Contents
1 Preliminary note 3 ���������������������������������������������������������������������������������������������������
2 Safety instructions 3 �����������������������������������������������������������������������������������������������
3 Functions and features 3 ����������������������������������������������������������������������������������������
4 Installation������������������������������������������������������������������������������������������������������������5
4�1 Installation of the sensors 5 ������������������������������������������������������������������������������
5 Electrical connection 5 ��������������������������������������������������������������������������������������������
5�1 Limited voltage / current 6 ��������������������������������������������������������������������������������
5�2 Wiring�������������������������������������������������������������������������������������������������������������6
5�2�1 Wiring of the sensors 1���4 (S1���S4) according to the sensor 7 ��������������
5�3 Connection of the sensors 8 �����������������������������������������������������������������������������
5�3�1 Monitoring the sensor cable 8 �����������������������������������������������������������������
5�4 Ethernet connection 8 ���������������������������������������������������������������������������������������
5�5 IP address 8 ������������������������������������������������������������������������������������������������������
6 Operation �������������������������������������������������������������������������������������������������������������8
6�1 Settings ���������������������������������������������������������������������������������������������������������9
7 Indicators (LEDs) 10 �����������������������������������������������������������������������������������������������
8 Maintenance, repair and disposal ���������������������������������������������������������������������� 11
9 Scale drawing ���������������������������������������������������������������������������������������������������� 11
3
UK
1 Preliminary note
• An instruction is indicated by "►":
Example: â–º Mount the unit as shown.
Important note
Non-compliance may result in malfunction or interference�
Information
Supplementary note
2 Safety instructions
• Please read the operating instructions prior to set-up of the unit� Ensure that
the product is suitable for your application without any restrictions�
• The unit conforms to the relevant regulations and EC directives�
• Improper or non-intended use may lead to malfunctions of the unit or to
unwanted effects in your application�
• Installation, electrical connection, set-up, operation and maintenance of the unit
must be carried out by qualified personnel authorised by the machine operator�
• The design of the unit corresponds to protection class III (EN61010) except for
the terminal blocks� Protection against accidental contact (safety from finger
contact to IP 20) for qualified personnel is only ensured if the terminals have
been completely inserted� Therefore the unit must always be mounted in a
control cabinet of at least IP 54 which can only be opened using a tool�
• For DC units the external 24 V DC supply must be generated and supplied
according to the requirements for safe extra-low voltage (SELV) since this
voltage is provided near the operating elements and at the terminals for the
supply of sensors without further protection measures�
3 Functions and features
• The diagnostic electronics has 2 analogue inputs and 4 dynamic inputs� These
inputs can be used for process value monitoring, vibration monitoring, vibration
diagnostics or analysis of other dynamic signals�
• An analogue current signal or a pulse signal can be connected to the analogue
inputs� They can be used as speed input for vibration diagnostics, as trigger of
a measurement or for process value monitoring�


Product specificaties

Merk: IFM
Categorie: Niet gecategoriseerd
Model: VSE002

Heb je hulp nodig?

Als je hulp nodig hebt met IFM VSE002 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd IFM

IFM

IFM DP4302 Handleiding

12 April 2024
IFM

IFM EVCB02 Handleiding

11 Maart 2024
IFM

IFM EVCB03 Handleiding

11 Maart 2024
IFM

IFM EVF666 Handleiding

11 Maart 2024
IFM

IFM TM4599 Handleiding

8 Januari 2024
IFM

IFM ZB0074 Handleiding

8 Januari 2024
IFM

IFM EVF661 Handleiding

8 Januari 2024
IFM

IFM IIP201 Handleiding

7 Januari 2024
IFM

IFM DP4200 Handleiding

7 Januari 2024
IFM

IFM IIP200 Handleiding

7 Januari 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd