IFM PT2334 Handleiding
IFM
Niet gecategoriseerd
PT2334
Bekijk gratis de handleiding van IFM PT2334 (5 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 24 mensen en kreeg gemiddeld 4.4 sterren uit 12.5 reviews. Heb je een vraag over IFM PT2334 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/5
Operating instructions
Electronic pressure sensor
for industrial applications
PT2334
80297756 / 00 10 / 2020
UK
2
1 Preliminary note
1.1 Symbols used
►Instruction
> Reaction, result
[…] Designation of keys, buttons or indications
→Cross-reference
Important note
Non-compliance may result in malfunction or interference
Information
Supplementary note
2 Safety instructions
• The device described is a subcomponent for integration into a system.
- The manufacturer of the system is responsible for the safety of the system.
- The system manufacturer undertakes to perform a risk assessment and to
create a documentation in accordance with legal and normative requirements
to be provided to the operator and user of the system. This documentation
must contain all necessary information and safety instructions for the operator,
the user and, if applicable, for any service personnel authorised by the
manufacturer of the system.
Contents
1 Preliminary note 2 ...................................................................................................
1.1 Symbols used 2 ................................................................................................
2 Safety instructions 2 ...............................................................................................
3 Functions and features 3 ........................................................................................
3.1 Applications ...................................................................................................3
3.2 Use in hydraulic systems 4 ..............................................................................
4 Functions .............................................................................................................4
5 Installation............................................................................................................5
6 Electrical connection 5 ............................................................................................
3
UK
• Read this document before setting up the product and keep it during the entire
service life.
• The product must be suitable for the corresponding applications and
environmental conditions without any restrictions.
• Only use the product for its intended purpose (→ Functions and features).
• Only use the product for permissible media (→ Technical data).
• If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur.
• The manufacturer assumes no liability or warranty for any consequences
caused by tampering with the product or incorrect use by the operator.
• Installation, electrical connection, set-up, operation and maintenance of the unit
must be carried out by qualified personnel authorised by the machine operator.
• Protect units and cables against damage.
3 Functions and features
The pressure sensor detects the system pressure and converts it into an analogue
output signal.
3.1 Applications
• Type of pressure: relative pressure
Information on pressure rating and bursting pressure → data sheet.
Pressure Equipment Directive (PED):
The units comply with the Pressure Equipment Directive and are designed
and manufactured for group 2 fluids in accordance with the sound
engineering practice. Use of group 1 fluids on request!
Avoid overload pressure exceeding the specified maximum permissible
pressure by taking appropriate measures.
The indicated bursting pressure must not be exceeded.
Even if the bursting pressure is exceeded only for a short time, the unit
may be destroyed. ATTENTION: Risk of injury!
If the cable length exceeds 30 m or if used outside buildings, there is a risk
of overvoltage pulses from external sources. We recommend to use the
unit in protected operating environments and to limit overvoltage pulses to
max. 500 V.
Product specificaties
| Merk: | IFM |
| Categorie: | Niet gecategoriseerd |
| Model: | PT2334 |
Heb je hulp nodig?
Als je hulp nodig hebt met IFM PT2334 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd IFM
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
23 Mei 2025
2 Mei 2025
2 Mei 2025
2 Mei 2025
2 Mei 2025
2 Mei 2025
Handleiding Niet gecategoriseerd
- Namco Bandai Games
- T.I.P.
- Enrock Marine
- Colortone
- My Wall
- Meopta
- Duromax
- TOOLMATE
- Approx
- Enovate
- ARNOLD Lichttechnik
- SVS
- CTA Digital
- Netsys
- Coleman
Nieuwste handleidingen voor Niet gecategoriseerd
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025