IFM OGP700 Handleiding


Bekijk gratis de handleiding van IFM OGP700 (5 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 15 mensen en kreeg gemiddeld 4.5 sterren uit 8 reviews. Heb je een vraag over IFM OGP700 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/5
Operating instructions
Retro-reflective sensor
OGP7xx
80284283 / 00 04 / 2019
UK
2
1 Preliminary note
1.1 Symbols used
Instruction
> Reaction, result
[…] Designation of pushbuttons, buttons or indications
Cross-reference
Important note
Non-compliance can result in malfunctions or interference.
2 Safety instructions
According to the cULus approval
Caution - Use of controls or adjustments or procedures other than those specified
herein may result in hazardous radiation exposure.
Visible laser light; CLASS 1 LASER PRODUCT.
EN/IEC 60825-1 : 2007 and EN/IEC 60825-1 : 2014 complies with 21 CFR
1040 except for deviations pursuant to Laser Notice No. 50, dated June
2007
Position of the product label Additional label
3 Functions and features
In conjunction with a prismatic reflector or reflective tape the retro-reflective
sensor detects objects and materials without contact and indicates their presence
by a switching signal.
Range: www.ifm.com → Select your country → Data sheet direct: e.g. OGE700.
3
UK
4 Installation


1
1: LED
Fit the prismatic reflector or the reflective tape behind the object to be detected.
Align the retro-reflective sensor to it and secure it to a bracket.
Maximum range is only possible with precise alignment.
5 Electrical connection
The unit must be connected by a qualified electrician.
The national and international regulations for the installation of electri-
cal equipment must be adhered to.
Voltage supply according to EN 50178.
Disconnect power.
Connect the unit as follows:
DC PNP
pin 1 = L+ (10...36 V DC)
pin 3 = L-
pin 4 = load (200 mA)
(pin 2 = not connected)


Product specificaties

Merk: IFM
Categorie: Niet gecategoriseerd
Model: OGP700

Heb je hulp nodig?

Als je hulp nodig hebt met IFM OGP700 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden