IFM OGP501 Handleiding


Bekijk gratis de handleiding van IFM OGP501 (5 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 21 mensen en kreeg gemiddeld 4.6 sterren uit 11 reviews. Heb je een vraag over IFM OGP501 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/5
Operating instructions
Retro-reflective sensor
OGP50x
UK
704072 / 01 06 / 2011
2
1 Functions and features
In conjunction with a prismatic reflector or reflective tape the retro-reflective
sensor detects objects and materials without contact and indicates their presence
by a switching signal.
Range 0.03...5 m (on prismatic reflector Ø 80 mm; E20005).
2 Installation
Fit the prismatic reflector or the reflective tape behind the object to be detected.
Align the retro-reflective sensor to it and and secure it to a bracket.
Maximum range only with accurate alignment.
3 Electrical connection
Disconnect power.
Connect the unit as follows.
Cable Connector Pin connection
L+ BN pin 1
L- BU pin 3
load BK pin 4
pin 2
Core colours BN = brown, BU = blue, BK = black
UK
3
4 Operating and display elements
 
1: LED
2: [OUT off]
3: [OUT on]
4 Settings
4.1 The sensor is to switch when the object is detected
1
Position the object.
Press [OUT on] for 2 s.
> The sensitivity is set to the object.
> The LED flashes.
2
Remove the object.
Press [OUT off].
> The sensitivity is set without object.
> The LED goes out. The programming is finished.
4.2 The sensor is not to switch when the object is detected
Position the object (see figure 1) and press [OUT off] for 2
s.
Remove the object (see figure 2) and press [OUT on].
The settings can also be carried out first without object and then with object.


Product specificaties

Merk: IFM
Categorie: Niet gecategoriseerd
Model: OGP501

Heb je hulp nodig?

Als je hulp nodig hebt met IFM OGP501 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden