IFM OGE383 Handleiding


Bekijk gratis de handleiding van IFM OGE383 (3 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 80 mensen en kreeg gemiddeld 4.9 sterren uit 40.5 reviews. Heb je een vraag over IFM OGE383 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/3
Operating instructions
Through-beam sensor
OGE38x
OGS38x
7200011 / 00 11 / 2011
UK
UK
UK
UK
UK
2
1 Functions and features
The through-beam sensor detects objects and materials without contact and
indicates their presence by a switching signal.
For the range see the type label.
2 Installation
Install the receiver (OGE38x) and secure it to a bracket.
Align the transmitter (OGS38x) to the receiver and secure it also to a bracket.
> Maximum range only with accurate alignment.
3 Electrical connection
Disconnect power.
Connect the unit as follows.
3.1 Transmitter
1
3
L+
L
pin 1 = L+ (10...30 V DC)
pin 3 = L-
(pin 4 = not connected)
(pin 2 = not connected)
3
UK
3 Receiver
PNP
L+
L
1
4
3
pin 1 = L+ (10...30 V DC)
pin 3 = L-
pin 4 = load (PNP, 200 mA)
(pin 2 = not connected)
NPN
L+
L
1
4
3
pin 1 = L+ (10...30 V DC)
pin 3 = L-
pin 4 = load (NPN, 200 mA)
(pin 2 = not connected)
4 Operation
Check whether the sensor operates correctly.
Receiver (OGE38x): The yellow LED is lit when the switching ouptut is swit-
ched. The green LED is lit when the sensor is ready for operation.
Transmitter (OGS38x): The green LED is lit when the sensor is ready for
operation.
5 Maintenance
Keep the lens of the sensor free from soiling.
For cleaning do not use any solvents or cleaning agents which could damage
the plastic material.


Product specificaties

Merk: IFM
Categorie: Niet gecategoriseerd
Model: OGE383

Heb je hulp nodig?

Als je hulp nodig hebt met IFM OGE383 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden