IFM OG5099 Handleiding
IFM
Bewegingsdetector
OG5099
Bekijk gratis de handleiding van IFM OG5099 (5 pagina’s), behorend tot de categorie Bewegingsdetector. Deze gids werd als nuttig beoordeeld door 32 mensen en kreeg gemiddeld 3.8 sterren uit 16.5 reviews. Heb je een vraag over IFM OG5099 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/5
Operating instructions
Diffuse reflection sensor
with background suppression
OGH
701166 / 03 09 / 2005
UK
UK
UK
UKUK
2
Function and features
The diffuse reflection sensor detects objects and materials without contact and
indicates their presence by a switched signal.
Range (r): see type label (value referred to white paper 200mm x 200mm).
Electrical connection
Isolate power, then connect the unit (see page 5 or type label).
Core colours (for sensors with cable connection): BN = brown, BU = blue, BK =
black.
Programming of the output function (light-on or dark-on) by wiring (see page 5 or
type label).
Installation
2
1
Pushbutton
LEDs red, green, yellow
Align the photocell and fasten it to a mounting bracket.
Maximum range is only possible with precise alignment.
1:
2:
Isolate power, then connect the unit (see page 5 or type label).
3
UK
Setting of the sensitivity with stationary objects
1
Activate the programming mode of the unit without object.
Press for about 2s until the red LED flashes.
The red LED goes out; the yellow and green LEDs flash alternately.
The unit is in the programming mode.
If in addition the red LED is lit, the reflection of the background is too intensive (e.g.
reflecting surface). Angle the unit in the horizontal plane until the red LED goes out.
If you continue with step 3 although the red LED is lit, programming is interrupted.
The unit then passes into the operating mode with the setting being unchanged.
2
Setting without object.
Press once.
The yellow and green LEDs go out for approx. 1s, then flash again alternately.
3
Setting with object.
Press once.
The yellow and green LEDs go out for approx. 1s, then the green LED is on.
The unit is in the operating mode.
Programming is only possible if you keep to this order (first background, then
object).
Product specificaties
| Merk: | IFM |
| Categorie: | Bewegingsdetector |
| Model: | OG5099 |
Heb je hulp nodig?
Als je hulp nodig hebt met IFM OG5099 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Bewegingsdetector IFM
5 December 2024
Handleiding Bewegingsdetector
- Homematic IP
- Megatron
- Eaton
- Satel
- EQ3
- Chuango
- Pentatech
- Maxsa
- Blaupunkt
- Inovonics
- Pepperl+Fuchs
- Techly
- Nexa
- GEV
- InLine
Nieuwste handleidingen voor Bewegingsdetector
6 Juli 2025
6 Juli 2025
5 Juli 2025
5 Juli 2025
5 Juli 2025
5 Juli 2025
5 Juli 2025
5 Juli 2025
5 Juli 2025
4 Juli 2025