IFM O4E500 Handleiding


Bekijk gratis de handleiding van IFM O4E500 (5 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 25 mensen en kreeg gemiddeld 4.6 sterren uit 13 reviews. Heb je een vraag over IFM O4E500 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/5
Operating instructions
Through-beam sensor
O4E5xx / O4S5xx
706274 / 00 11 / 2012
UK
2
1 Preliminary note
1.1 Symbols used
Instruction
> Reaction, result
[…] Designation of pushbuttons, buttons or indications
Cross-reference
Important note
Non-compliance can result in malfunctions or interference.
2 Functions and features
The through-beam sensor detects objects and materials without contact and
indicates their presence by a switching signal.
Range: → type label.
3 Installation
transmitter receiver
Install the receiver (O4E...) and secure it to a bracket.
Align the transmitter (O4S ...) to the receiver and secure it in the same way.
Maximum range only with accurate alignment.
3
UK
4 Operating and display elements
1
2
3
1: LED yellow
2: [OUT on] button
3: [OUT off] button
receiver
5 Electrical connection
The unit must be connected by a qualified electrician.
The national and international regulations for the installation of
electrical equipment must be adhered to.
Ensure voltage supply to EN 50178.
Disconnect power.
Connect the unit as follows:
Transmitter connector
1
3
L+
L
pin 1 = L+
(pin 2: not connected)
pin 3 = L-
(pin 4: not connected)
Transmitter cable *


BN = L+
BU = L-
Receiver connector
pin 1 = L+
(pin 2 = not connected)
pin 3 = L-
pin 4 = load


Product specificaties

Merk: IFM
Categorie: Niet gecategoriseerd
Model: O4E500

Heb je hulp nodig?

Als je hulp nodig hebt met IFM O4E500 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden