IFM MFH202 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor IFM MFH202 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
Operating instructions
Hydraulic cylinder sensor
MFH / M9H
11400612 / 0005 / 2021
GB
2
1 Preliminary note
You will find instructions, technical data, approvals and further information using
the QR code on the unit / packaging or at .www.ifm.com
1.1 Symbols used
Requirement
Instructions
Reaction, result
[...] Designation of keys, buttons or indications
Cross-reference
Important note
Non-compliance may result in malfunction or interference.
Information
Supplementary note
2 Intended use
The unit detects ferromagnetic metals (FE metals) without contact and indicates
their presence by a switching signal.
3 Mounting
3.1 MFH
M12x1-6H
12,4
10 H7
Rz
6,3
15°
≥10 7 11
R
1,5
90°
max
The unit can be adjusted to the piston rod via the insertion depth.
3
ATTENTION
During set-up, do not screw in the unit too deeply to avoid
mechanical damage to the unit, piston rod and cylinder.
For mounting with a fixed end stop, use units from the M9H series.
1
2
1: Piston rod
2: Piston
uMake sure that the piston rod is in
the end position to be detected.
uScrew the unit up to the end stop.
uUnscrew the unit half a turn (~ 0.5
mm) to avoid mechanical damage.
uTighten the fixing nuts with < 15
Nm.
3.2 M9H
M14x1,5 -6H
≥ 10
≥ 11
Ra 3,2
90°
uScrew the unit into an M14 thread.
uTighten with < 25Nm.
GB


Product specificaties

Merk: IFM
Categorie: Niet gecategoriseerd
Model: MFH202

Heb je hulp nodig?

Als je hulp nodig hebt met IFM MFH202 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd IFM

IFM

IFM DP4302 Handleiding

12 April 2024
IFM

IFM EVCB02 Handleiding

11 Maart 2024
IFM

IFM EVCB03 Handleiding

11 Maart 2024
IFM

IFM EVF666 Handleiding

11 Maart 2024
IFM

IFM TM4599 Handleiding

8 Januari 2024
IFM

IFM ZB0074 Handleiding

8 Januari 2024
IFM

IFM EVF661 Handleiding

8 Januari 2024
IFM

IFM IIP201 Handleiding

7 Januari 2024
IFM

IFM DP4200 Handleiding

7 Januari 2024
IFM

IFM IIP200 Handleiding

7 Januari 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd