IFM JN2100 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor IFM JN2100 (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
Installation instructions
Inclination sensor JN
JN2100
JN2101
80254488/00 05/2016
UK
2
1 Functions and features
The 2-axis inclination sensor with CANopen interface enables angle levelling and
position detection of mobile machines.
Typical applications are, for example, the position detection of access platforms,
levelling of mobile cranes or set-up of mobile machines.
2-axis inclination sensors with a measuring range of:
• JN2100: ±180° / 0...360°
• JN2101: ±45°
2 Symbols used
â–ºInstructions
Important note
Non-compliance can result in malfunction or interference.
3 Installation
â–ºDisconnect the system from power before installation.
3.1 Fastening
â–ºFasten the device using 4 M5 screws on a flat surface.
Screw material: steel or stainless steel.
3.2 Mounting surface
The housing must not be exposed to any torsional forces or mechanical stress.
â–ºUse compensating elements if there is no flat mounting surface available.
4 Electrical connection
The unit must be connected by a qualified electrician.
The national and international regulations for the installation of electrical equipment
must be adhered to.
â–ºDisconnect the installation from power and connect the unit.
3
UK
The inclination sensors are fitted with two round 5-pole M12 connectors (A-coded).
The pin connection corresponds to CiA DR-303-1.
4
2 1
3
5
1: CAN_SHLD shield
2: CAN_V+ supply voltage 24 V DC
3: CAN_GND GND
4: CAN_H H bus cable
5: CAN_L L bus cable
M12 connector CAN-In
3
1 2
4
5
1: CAN_SHLD shield
2: CAN_V+ supply voltage 24 V DC
3: CAN_GND GND
4: CAN_H H bus cable
5: CAN_L L bus cable
M12 socket CAN-Out
5 Technical data
Detailed manuals, technical data and further information at www.ifm.com.
6 Maintenance, repair and disposal
The unit is maintenance-free.
â–ºDispose of the device in accordance with the national environmental
regulations.
7 Approvals/standards
The CE declarations of conformity and approvals can be found at www.ifm.com.


Product specificaties

Merk: IFM
Categorie: Niet gecategoriseerd
Model: JN2100

Heb je hulp nodig?

Als je hulp nodig hebt met IFM JN2100 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd IFM

IFM

IFM DP4302 Handleiding

12 April 2024
IFM

IFM EVCB02 Handleiding

11 Maart 2024
IFM

IFM EVCB03 Handleiding

11 Maart 2024
IFM

IFM EVF666 Handleiding

11 Maart 2024
IFM

IFM TM4599 Handleiding

8 Januari 2024
IFM

IFM ZB0074 Handleiding

8 Januari 2024
IFM

IFM EVF661 Handleiding

8 Januari 2024
IFM

IFM IIP201 Handleiding

7 Januari 2024
IFM

IFM DP4200 Handleiding

7 Januari 2024
IFM

IFM IIP200 Handleiding

7 Januari 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd