IFM IO9923 Handleiding


Bekijk gratis de handleiding van IFM IO9923 (10 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 11 mensen en kreeg gemiddeld 4.3 sterren uit 6 reviews. Heb je een vraag over IFM IO9923 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/10
Installation Instructions
Inductive sensor
IOW
701795 / 01 10 / 2007
UK
UK
UK
UK
UK
2
Function and features
This sensor detects metals without contact and indicates their presence by
providing a switched signal. Nominal sensing range (Sn) see type label.
Mounting
Fix the mounting plate on the surface (hole centres 25mm). Then push the sensor
onto the locating lugs on the mounting plate and slide it on the mounting plate until
it snaps into place.
For units with connector this can be
rotated by 90°.
90°
Possible alignment of the sensing face
UK
Removing
To remove the sensor press down on the tab with a screwdriver while pulling the
sensor away from the mounting plate.
Electrical connection
Disconnect power before connecting the unit. Connect the sensor according
to the indications on the type label.
Operation
Check the safe functioning of the sensor. The LED is lit when the output is
switched.
The operation of the sensor is maintenance-free. For a correct function ensure:
that the sensing face and the open space are kept free of metal deposits and
foreign bodies, particularly for installation with the sensing face facing upwards.
EMC: The unit complies with the requirements according to EN 60947-5-2.


Product specificaties

Merk: IFM
Categorie: Niet gecategoriseerd
Model: IO9923

Heb je hulp nodig?

Als je hulp nodig hebt met IFM IO9923 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden